Browsing by Subject "Materials science"
Now showing items 1-20 of 99
-
3M en pantalla (mitos y mentiras sobre metales en pantalla)
(Sociedad Española de Materiales, 2020-05)
Article
Open AccessLos metales han formado parte de la evolución de la humanidad desde la antigüedad. Han sido objeto de culto, por escasos y exclusivos, y han sido la clave del desarrollo de armas, para, progresivamente, formar parte de los ... -
A dislocation assisted self-consistent constitutive model for the high-temperature deformation of particulate metal matrix composite
(Taylor & Francis, 2021-01)
Article
Restricted access - publisher's policyA dislocation assisted self-consistent model based on Tandon and Weng approach and Bergstrom dynamic recovery model for particulate-reinforced composites has been extended to consider the matrix evolution during high-temperature ... -
An efficient experimental methodology for the assessment of the dynamic behaviour of resilient elements
(Multidisciplinary Digital Publishing Institute (MDPI), 2020-06-27)
Article
Open AccessThe assessment of the dynamic behaviour of resilient elements can be performed using the indirect method as described in the standard ISO 10846-3. This paper presents a methodology for control the error on the estimation ... -
An experimental investigation of distortional buckling of steel storage rack columns
(2011-04-16)
Article
Restricted access - publisher's policy -
An introduction to FE2 multi-scale methods and why HPC is so crucial
(Barcelona Supercomputing Center, 2018-04-24)
Conference report
Open Access -
Analysis of copper effect on microstructures and mechanical properties in microalloyed steels
(2008)
Article
Restricted access - publisher's policyThe microstructure and mechanical properties under cool deformation conditions was investigated for three steels of approximately 0.03% carbon with different alloying additions of niobium and copper. Compression testing ... -
Analysis of fracture resistance of tool steels by means of acoustic emission.
(2010)
Conference report
Open AccessThe usage of advanced high strength steels (AHSS) in structural automotive components has been broadened in the past few years to satisfy the strict specifications of the automotive industry. Besides showing excellent ... -
Analysis of the Compression Behaviour of Reinforced Photocurable Materials Used in Additive Manufacturing Processes Based on a Mask Image Projection System
(Multidisciplinary Digital Publishing Institute (MDPI), 2021-08-16)
Article
Open AccessMask image projection based on stereolithography is an additive manufactured technology based on a Frontal Photopolymerization Process. Therefore, photocurable resins are used to build-up parts layer by layer. In this ... -
Análisis del comportamiento a impacto-indentación de materiales poliméricos mediante el método de elementos finitos
(2008-03-05)
Article
Restricted access - publisher's policyEl objetivo de este trabajo consiste en predecir la respuesta de materiales poliméricos sometidos a impacto-indentación mediante el programa de elementos finitos Abaqus/Explicit. En primer lugar se ha empleado un modelo ... -
Análisis, diseño y construcción de un chasis autoportante de material composite
(12CUIETT 2004, 2004)
Conference lecture
Open AccessEsta ponencia presenta el análisis estructural de un chasis autoportante para un vehículo monoplaza de bajo consumo, realizada en materiales compuestos. Este estudio comprende el análisis de los modos propios de vibración ... -
Aplicación de la técnica de emisión acústica (EA) para auscultación en diversos tipos de materiales y estructuras
(Editorial de la Universitat Politècnica de València (UPV), 2011)
Conference report
Open Access -
Biomineralización de superficies de titanio comercialmente puro funcionalizadas con poliaminiácidos obtenidos por modificación genética
(Universitat Politècnica de Catalunya, 2008-06-19)
Master thesis (pre-Bologna period)
Open AccessEn aquest Projecte Fi de Carrera s’ha estudiat el comportament anti fouling i la biomineralització de superfícies de titani comercialment pur amb 3 poliaminoàcids obtinguts mitjançant la modificació genètica, un ... -
Blisk fabrication by LFW
(In-Teh (www.intechweb.org), 2011-11-01)
Part of book or chapter of book
Restricted access - publisher's policy -
Caracterización de la respuesta ultrasónica de un acero dúplex 2205
(2012-01-02)
Article
Restricted access - publisher's policyEn el presente estudio se evalúa el comportamiento de las variables ultrasónicas de velocidad y atenuación de la onda longitudinal, medidas en muestras de acero dúplex SAF 2205 que han sido tratadas térmicamente. El estudio ... -
Caracterización nanomecánica mediante la técnica de nanoindentación de partículas duras
(2009)
Article
Open Access -
Caracterización tribo-mecánica de materiales para herramientas destinadas a la manipulación y el procesamiento de materias primas en condiciones de trabajo adversas.
(Universitat Politècnica de Catalunya, 2020-02-10)
Master thesis
Restricted access - author's decisionEl trabajo final de master (TFM) se realizará en colaboración con Eurecat dentro del marco del proyecto europeo HARSHWORK (Optimizing raw material handling and processing under harsh working conditions) de la convocatoria ... -
Cell response to collagen-calcium phosphate cement scaffolds investigated for nonviral gene delivery
(2011-04)
Article
Restricted access - publisher's policyCollagen-hydroxyapatite (HA) scaffolds for the non-viral delivery of a plasmid encoding the osteoinductive protein bone morphogenetic protein (BMP)-7 were developed. The collagen-HA was obtained by the combination of ... -
Chain architecture modifications of Poly(Lactic Acid) by reactive extrusion
(2011)
Conference report
Restricted access - publisher's policy -
Characterization of two Ti-Nb-Hf-Zr alloys under different cold rolling conditions
(2011-04-06)
Article
Restricted access - publisher's policyThe objective of this study is to obtain a new biomaterial to use in the load transfer medical implants field. The influence of cold work in the thermoelastic martensitic transformation and elastic modulus was investigated ... -
Cobre nanocristalino y ultrafino obtenido por molienda mecánica
(2010)
Article
Restricted access - publisher's policyEste artículo presenta un método de obtención y caracterización de muestras masivas de cobre con tamaño de grano ultrafino (inferior a 1 μm) y nanocristalino (inferior a 100 nm). La fabricación del cobre se realiza ...
