Now showing items 1-11 of 11

  • Diseño de un marco de ensayo de sellado de juntas con movimiento 

    Plyushchenko Rybasov, Andrey (Universitat Politècnica de Catalunya, 2015-07)
    Bachelor thesis
    Open Access
    En el presente trabajo de fin de grado se expone el planteamiento y diseño de un sistema mecánico que permita aplicar la condición de movimiento en los ensayos de resistencia al fuego de sellados de junta lineal según ...
  • Efficient implementation of a component-based joint model 

    Alhasawi, A.; Guezouli, S.; M., Hjiaj (CIMNE, 2015)
    Conference lecture
    Open Access
    This paper deals with a nonlinear analysis of beam-to-column steel joint. The connection uses an end-plate welded to the steel cross-section of a steel-concrete composite beam and bolted to the column flange. The proposed ...
  • Equaljoints PLUS: volumen con boletines de información para 4 uniones calificadas para sismo 

    Landolfo, Raffaele; D’Aniello, Mario; Costanzo, Silvia; Jiménez Torres, Adrià; Real Saladrigas, Esther; Mirambell Arrizabalaga, Enrique (2018)
    External research report
    Restricted access - publisher's policy
    Este documento ha sido desarrollado en el marco del Proyecto Europeo RFCS Equaljoints PLUS (754048-EQUALJOINTS-PLUS-RFCS-2016/RFCS-2016). Equaljoints-PLUS es un proyecto RFCS de 24 meses enfocado a diseminar el conocimiento ...
  • Equaljoints PLUS: volumen con boletines de información para 4 uniones calificadas para sismo 

    Landolfo, Raffaele; D'Aniello, Mario; Costanzo, Silvia; Jiménez Torres, Adrià; Real Saladrigas, Esther; Mirambell Arrizabalaga, Enrique (European Convention for Constructional Steelwork, 2018)
    Book
    Restricted access - publisher's policy
    Este documento se ha desarrollado en el marco del Proyecto Europeo RFCS Equaljoints PLUS (754048 — EQUALJOINTS-PLUS — RFCS-2016/RFCS-2016), dedicado a difundir los conocimientos alcanzados en el proyecto previo RCFS de 36 ...
  • Equaljoints PLUS: volumen con recomendaciones prenormativas de diseño para uniones de acero calificadas para sismo 

    Landolfo, Raffaele; D'Aniello, Mario; Costanzo, Silvia; Arrayago Luquin, Itsaso; Mirambell Arrizabalaga, Enrique (European Convention for Constructional Steelwork, 2018)
    Book
    Restricted access - publisher's policy
    Este documento se ha desarrollado en el marco del Proyecto Europeo RFCS Equaljoints PLUS (754048 — EQUALJOINTS-PLUS — RFCS-2016/RFCS-2016), dedicado a difundir los conocimientos alcanzados en el proyecto previo RCFS de 36 ...
  • Estudio experimental de la influencia del material de junta en la respuesta de deformaciones de obra de fábrica 

    Pajares Fernández, Rafael (Universitat Politècnica de Catalunya, 2015-06-22)
    Bachelor thesis
    Restricted access - author's decision
  • Lower bound element and submodel for modelling of joints between precast concrete panels 

    Herfelt, Morten A.; Poulsen, Peter N.; Hoang, Linh C.; Jensen, Jesper F. (CIMNE, 2015)
    Conference lecture
    Open Access
    In practice, precast concrete structures are designed using either analytical methods or linear finite element tools, and the in-situ cast joints between the precast panels are assessed using conservative empirical design ...
  • New structural joint by rebar looping applied to staged box girder bridge construction: static tests 

    Villalba Herrero, Sergi; Casas Rius, Joan Ramon (2016-04)
    Article
    Open Access
    This paper shows the design, development and experimental checking of a modified type of structural joint with limited length between concrete segments cast “in-situ”. The design concept is based on the development length ...
  • Numerical study of an arcan tensile compression shear test in dynamic: application to bonded joints 

    Valès, B.; Marguet, S.; Créac'hcadec, R.; Sohier, L.; Ferrero, J-F.; Navarro, P. (CIMNE, 2015)
    Conference report
    Open Access
    This paper presents a numerical study of the Arcan TCS testing device under dynamic conditions. This test is commonly used to characterize the mechanical behavior of bonded joints subjected to combined quasi-static loadings. ...
  • Numeric-analytical model of bolted joints 

    Crespo Guzmán, Jordi (Universitat Politècnica de Catalunya, 2014-07)
    Bachelor thesis
    Restricted access - author's decision
    Covenantee:  Politecnico di Torino
    The objective of this work is the improvement of his thesis, focusing only on the process to find the stiffness equation since only works for steel and obtain an equation that works for the majority of common materials ...
  • Study about strength performance of adhesive metal-composite joints 

    Domènech Vadillo, Marc (Universitat Politècnica de Catalunya, 2016-01-20)
    Bachelor thesis
    Restricted access - author's decision
    Les unions químiques entre l'acer i els compostos són una alternativa tecnològica per fer la transició entre dues peces sotmeses a tensió. En aquest TFG es vol estudiar el comportament resistent de rodons de fibra de ...