Ara es mostren els items 1-20 de 21

    • A test setup for the characterization of Lorentz-force MEMS magnetometers 

      Sánchez Chiva, José María; Valle Fraga, Juan José; Fernández Martínez, Daniel; Madrenas Boadas, Jordi (2021-09-13)
      Article
      Accés obert
      Lorentz-force MEMS magnetometers are interesting candidates for the replacement of magnetometers in consumer electronics products. Plenty of works in the literature propose MEMS magnetometers, their readout circuits and ...
    • Complex-based controller for a three-phase inverter with an LCL filter connected to unbalanced grids 

      Dòria Cerezo, Arnau; Martin Serra, Federico; Bodson, Marc (Institute of Electrical and Electronics Engineers (IEEE), 2018-07-09)
      Article
      Accés obert
      A new controller for a grid connected inverter with an LCL filter is proposed in this paper. The system is described by its complex representation and the controller is designed using the complex root locus method. The ...
    • Computational model for the chemo-mechanical mechanism in wound healing 

      Roldán, Lisandro Agustín (Universitat Politècnica de Catalunya, 2017-06-16)
      Projecte Final de Màster Oficial
      Accés obert
      Wounds in multicellular tissue occur regularly through the lifetime of living organisms, and the closure of these gaps is fundamental for their healthy development. From the physiological point of view, the success in ...
    • Configuració i manteniment de cintes transportadores en entorns industrials 

      Vives Llordés, Jordi (Universitat Politècnica de Catalunya, 2013-06-13)
      Projecte Final de Màster Oficial
      Accés obert
      Aquest treball tracta d’incorporar el material didàctic necessari per introduir als alumnes del CFGS en Mecatrònica els coneixements de cintes transportadores en entorns industrials: indústria extractiva i de procés. ...
    • Control digital de un sistema electromecánico viga - bola 

      Alcívar Altamirano, Miguel Angel (Universitat Politècnica de Catalunya, 2014-10-14)
      Treball Final de Grau
      Accés obert
      Aquest projecte té el seu inici d’un projecte anterior: “Disseny i Control d’un Sistema Electromecànic Biga- Bola” amb la diferència que al projecte anterior es dóna una solució de caràcter analògic, i en el projecte ...
    • Correcting the ADCS jitter induced blurring in small satellite imagery 

      Llaveria Godoy, David; Camps Carmona, Adriano José; Hyuk, Park (2020-09)
      Article
      Accés obert
      Earth Observation missions have increasingly demanding requirements, i.e., higher spatial resolutions and SNR, and lower revisit times, etc. High-resolution images have to be captured with precise pointing accuracy which ...
    • Desenvolupament d'un sistema electromecànic AutoPark 

      Capdevila Gonzalez, Jordi (Universitat Politècnica de Catalunya, 2016-09-05)
      Projecte Final de Màster Oficial
      Accés restringit per acord de confidencialitat
    • Diagnosis electromechanical system by means CNN and SAE: an interpretable-learning study 

      Arellano Espitia, Francisco; Delgado Prieto, Miquel; Martínez Viol, Víctor; Saucedo Dorantes, Juan Jose; Osornio Rios, Roque A. (Institute of Electrical and Electronics Engineers (IEEE), 2022)
      Text en actes de congrés
      Accés obert
      Cyber-physical systems are the response to the adaptability, scalability and accurate demands of the new era of manufacturing called Industry 4.0. They will become the core technology of control and monitoring in smart ...
    • Diseño y control de un sistema electromecánico inestable de dos grados de libertad: aplicación al caso de un péndulo invertido 

      Molis Merino, Eugenio (Universitat Politècnica de Catalunya, 2015-06-05)
      Treball Final de Grau
      Accés obert
      En este proyecto, se ha realizado el diseño y el control de un sistema electromecánico inestable de dos grados de libertad. Aplicación al caso de un péndulo invertido, un sistema no lineal e inestable controlado mediante ...
    • Disseny d’un entorn virtual amb aplicació de les TIC a una unitat formativa del CFGM d’Electromecànica de Vehicles 

      Grau Moreso, Alba (Universitat Politècnica de Catalunya, 2022-10-25)
      Projecte Final de Màster Oficial
      Accés obert
      A aquest treball es desenvolupa una proposta didàctica diferent, de la UF i de l'entorn virtual d'aquesta, que pretén adreçar alguns dels problemes diaris observats a l'aula durant el Pràcticum. Aquests són ben coneguts ...
    • Effective current-driven memory operations for low-power ReRAM applications 

      Cirera Hernandez, Albert; Garrido Fernández, Blas; Rubio Sola, Jose Antonio; Vourkas, Ioannis (Institute of Electrical and Electronics Engineers (IEEE), 2023-05-13)
      Article
      Accés obert
      Resistive switching (RS) devices are electronic components which exhibit a resistive state that can be adjusted to different nonvolatile levels via electrical stressing, fueling the development of future resistive memories ...
    • Evaluation of novelty detection methods for condition monitoring applied to an electromechanical system 

      Delgado Prieto, Miquel; Cariño Corrales, Jesús Adolfo; Zurita Millán, Daniel; Millán Gonzálvez, Marta; Ortega Redondo, Juan Antonio; Romero Troncoso, René de Jesús (InTech, 2017-05-31)
      Capítol de llibre
      Accés obert
      Dealing with industrial applications, the implementation of condition monitoring schemes must overcome a critical limitation, that is, the lack of a priori information about fault patterns of the system under analysis. ...
    • Frequency selective damping of sub-synchronous oscillations for grid-forming power converters 

      Lai, Ngoc Bao; Marín Arévalo, Leonardo Vidal; Tarraso Martínez, Andrés; Gregory Baltas, Nicholas; Rodríguez Cortés, Pedro (Institute of Electrical and Electronics Engineers (IEEE), 2021)
      Comunicació de congrés
      Accés restringit per política de l'editorial
      With the advent of renewable energy, stability of power system is becoming more and more crucial. Recently, grid-forming converter concept has attracted much attention from the industry and academia as a potential solution ...
    • Incremental novelty detection and fault identification scheme applied to a kinematic chain under non-stationary operation 

      Cariño Corrales, Jesús Adolfo; Delgado Prieto, Miquel; Zurita Millán, Daniel; Picot, Antoine; Ortega Redondo, Juan Antonio; Romero Troncoso, René (2019-01-01)
      Article
      Accés obert
      Classical methods for monitoring electromechanical systems lack two critical functions for effective industrial application: management of unexpected events and the incorporation of new patterns into the knowledge database. ...
    • Mechanisms Underlying Electro-Mechanical Cardiac Alternans 

      Echebarría Domínguez, Blas; Álvarez Lacalle, Enrique; Rodríguez Cantalapiedra, Inma; Peñaranda Ayllón, Angelina (Springer, 2016-02-29)
      Capítol de llibre
      Accés restringit per política de l'editorial
      Electro-mechanical cardiac alternans consists in beat-to-beat changes in the strength of cardiac contraction. Despite its important role in cardiac arrhythmogenesis, its molecular origin is not well understood. The appearance ...
    • Modeling of electromechanical transduction at finite deformation 

      Dave, Nikhil (Universitat Politècnica de Catalunya, 2018-07-05)
      Projecte Final de Màster Oficial
      Accés restringit per decisió de l'autor
    • Els motors elèctrics aplicats al món industrial 

      Ruiz Casado, Óscar (Universitat Politècnica de Catalunya, 2011-06-27)
      Projecte Final de Màster Oficial
      Accés obert
      La meva dilatada experiència com a responsable d’accionaments elèctrics i motors industrials a diferents empreses del sector m’ha permès detectar les necessitats reals dels tècnics i enginyers relacionats amb ...
    • Multiscale modeling of surface effects in small-scale electromechanics 

      Dingle Palmer, Monica (Universitat Politècnica de Catalunya, 2020-09-29)
      Projecte Final de Màster Oficial
      Accés restringit per decisió de l'autor
    • Reducción del ruido electromecánico en motores de c.c. aplicados al accionamiento limpiaparabrisas 

      Rodriguez Matilla, Roberto (Universitat Politècnica de Catalunya, 2007-06-29)
      Projecte/Treball Final de Carrera
      Accés obert
      En una línea de montaje semiautomática de inducidos destinados al accionamiento de motores limpiaparabrisas traseros, hay integradas 13 estaciones automáticas de control 100%, que van desde el control del ensamblaje del ...
    • Selenium enriched hybrid metal chalcogenides with enhanced redox kinetics for high-energy density supercapacitors 

      Manikandan, Ramu; Justin Raj, Chellan; Nagaraju, Goli; Velayutham, Rajavel; Moulton, Simon E.; Puigdollers i González, Joaquim; Chul Kim, Byung (2021-06-15)
      Article
      Accés obert
      Rational design and synergistic interactions between the electrode and electroactive materials have a huge impact on elevating the energy storage performance of supercapacitor devices. Herein, selenium enriched hybrid ...