Exploració per tema "Aliatges"
Ara es mostren els items 1-20 de 43
-
Analysis of the mechanical relaxations of 6061 and 6082 (Al–Mg–Si) alloys by using the time-temperature superposition principle
(2017)
Text en actes de congrés
Accés restringit per política de l'editorialThe viscoelastic response of commercial 6061 and 6082 (Al–Mg–Si) alloys was measured with a dynamic-mechanical analyzer (DMA) as a function of both the temperature (in the range 30 to 425ºC) and the loading frequency (in ... -
Can surface modification enhance the mechanical properties through microstructural changes of magnesium alloys?
(Universitat Politècnica de Catalunya, 2021-02-12)
Projecte Final de Màster Oficial
Accés obertEl objectivo principal de este trabajo final de máster (TFM) consiste en estudiar el efecto de la modificación microestructural, así como la directa modificación de las propiedades mecánicas bajo diferentes campos de ... -
Caracterització de les propietats mecàniques de peces d'aliatges lleugers aeronàutics
(Universitat Politècnica de Catalunya, 2007-06-14)
Projecte/Treball Final de Carrera
Accés obertEl objetivo de este proyecto es la caracterización de las propiedades mecánicas de dos aleaciones de aluminio de uso muy amplio en el sector aeronáutico, 2024-T3 y 7075-T6, usando diversas máquinas de ensayos. Al final ... -
Caracterització electroquímica d'aliatges "High-Entropy"
(Universitat Politècnica de Catalunya, 2020-10-22)
Treball Final de Grau
Accés obertEn aquest treball s’han produït una sèrie de composicions d’uns aliatges anomenats high-entropy metallic glasses. Aquest tipus d’aliatges són una combinació d’aliatges high-entropy, creats a partir de la fusió a alta ... -
Caracterización de la microestructura de una aleación de Ti libre de Ni con memoria de forma y bajo módulo para aplicaciones biomédicas ante diferentes velocidades de enfriamiento
(Universitat Politècnica de Catalunya, 2010-06-17)
Projecte/Treball Final de Carrera
Accés obertEn aquest projecte s’ha caracteritzat una aleació de titani sense níquel disenyada per tenir un baix mòdul elàstic i/o memòria de forma, destinada a ser utilitzada per la creació d’implants biomèdics. La aleació va ser ... -
Caracterización y optimización de aleaciones de Ti libres de Ni con bajo módulo elástico y/o memoria de forma
(Universitat Politècnica de Catalunya, 2009-04)
Projecte/Treball Final de Carrera
Accés obertCon el propósito de obtener una aleación de Ti libre de Ni que posea bajo módulo elástico y/o memoria de forma, el presente trabajo tiene como objetivo la caracterización y optimización de dos aleaciones del sistema ... -
Characterization of high-entropy alloys: study of the addition of aluminum to the high entropy system HfMoTaTi+Al
(Universitat Politècnica de Catalunya, 2018-01)
Treball Final de Grau
Accés obertHigh Entropy Alloys (HEA) are alloy systems that are formed with five or more principal elements of alloy or have an entropy of mixture higher than 1.5R. Although at first it may seem like if it is extrapolated from binary ... -
Characterization of precipitation kinetics of Inconel 718 superalloy by the stress relaxation technique
(2012)
Article
Accés restringit per política de l'editorialInconel 718 is a nickel-chromium-iron superalloy which presents excellent mechanical properties at high temperatures, as well as good corrosion resistance and weldability. These characteristics can be optimized with an ... -
Contact damage and fracture micromechanism of multilayered TiN/CrN coatings at micro- and nano-length scales
(2014)
Article
Accés restringit per política de l'editorialIn this study, systematic nanomechanical andmicromechanical studies have been conducted in threemultilayer TiN/CrN systems with different bilayer periods (8, 19 and 25 nm). Additionally, experimental work has been ... -
Degradation of azo dyes by rapidly solidified metallic particles
(2015)
Comunicació de congrés
Accés obertAzo compounds are one of the most common families of dyes used in textile and leather treatments. An important step during the treatment of water polluted by these compounds, is the degradation of the compounds by ... -
Effect of minor Co additions on the crystallization and magnetic properties of Fe(Co)NbBCu alloys
(2010)
Article
Accés obertThe effect of partial replacement of Fe by Co (up to 8 %) on thermal stability, structure and magnetic properties of FeNbBCu alloys has been explored in this paper. The results indicate that Co reduces the stability against ... -
Effect of TiO 2 nanoshape on the photoproduction of hydrogen from water-ethanol mixtures over Au 3 Cu/TiO 2 prepared with preformed Au-Cu alloy nanoparticles
(2019-07-05)
Article
Accés obertA series of TiO2 nanoshapes (microurchins, nanobelts, nanowires, microrods and nanotubes) were prepared and decorated with preformed nanoparticles of Au-Cu alloy (Au:Cu¿=¿3:1 molar, 1¿wt.% metal content). The resulting ... -
Equal channel angular pressing of Cu-Al bimetallic rods
(2012)
Article
Accés restringit per política de l'editorialCoextrusion and corolling are the major processes to produce bimetallic rods, tubes and wires, the objective being to perform clad metals, bimetallic joints or seals. The aim of the present work is to produce bimetallic ... -
Estudi de l'efecte de l'anisotropia sobre el comportament electroplàstic d'aliatges d'alumini
(Universitat Politècnica de Catalunya, 2016-04-26)
Treball Final de Grau
Accés obertEn aquest treball s’ha investigat si el fenomen de la electroplasticitat en provetes de microtracció es veu afectat per la influència de la direcció de laminació del material i la velocitat d’assaig durant la tracció. El ... -
Estudi del percentatge de nodularitat mitjançant la tècnica d'ultrasons
(Universitat Politècnica de Catalunya, 2015-05)
Treball Final de Grau
Accés obert
Realitzat a/amb: FunosaA l'empresa Fundiciones de Ódena, S.A. (Funosa), on es realitza aquest estudi, s'utilitza per a la fabricació de ferro nodular el sistema In-Mold. Consisteix a afegir el nodulitzant (aliatge compost per ferro, silici i ... -
Estudio del efecto de la modificación con estroncio en la microestructura y las propiedades mecánicas de aleaciones Al-Si-Mg
(Universitat Politècnica de Catalunya, 2020-07-14)
Projecte Final de Màster Oficial
Accés obertUn dels principals defectes que apareixen en els aliatges d'alumini obtinguts per fosa són els causats per la porositat. En aquest treball s’ha analitzat un aliatge Al-Si-Mg utilitzat per la fabricació de connectors d'alta ... -
Functional fatigue recovery of superelastic cycled NiTi wires based on near 100ºC aging treatments
(2015)
Text en actes de congrés
Accés obertFunctional fatigue affecting superelastic behaviour of NiTi wires includes an accumulation of residual strain and an uneven decrement of transformation stress on cycling. Although this evolution is observed to diminish ... -
Growth of Au-Pd2Sn nanorods via galvanic replacement and their catalytic performance on hydrogenation and sonogashira coupling reactions
(2018-09-11)
Article
Accés obertColloidal Pd2Sn and Au–Pd2Sn nanorods (NRs) with tuned size were produced by the reduction of Pd and Sn salts in the presence of size- and shape-controlling agents and the posterior growth of Au tips through a galvanic ... -
How relevant are molecular electronic parameters for predicting corrosion inhibition efficiency: imidazoles as corrosion inhibitors of Cu/Zr materials in NaCl solution
(2021-12-01)
Article
Accés restringit per política de l'editorialCorrelations between corrosion inhibition efficiencies and DFT calculated molecular parameters are critically evaluated for nine imidazole-based compounds on eight Cu/Zr materials in 3 wt% NaCl solution. To this end, 31 ... -
Hybrid organophosphonic-silane coating for corrosion protection of magnesium alloy AZ91: The influence of acid and alkali pre-treatments
(Elsevier, 2019-01-15)
Article
Accés obertThis work reports the development of environmentally friendly coatings for the protection against corrosion of AZ91 magnesium alloy substrates. As a novelty, the synergic combination of the use of silica precursors and ...