Now showing items 1-8 of 8

    • Comportamiento al desgaste por deslizamiento en aceros inoxidables: ferrítico, austenítico, dúplex y martensítico. 

      Renedo Rouco, Jordi (Universitat Politècnica de Catalunya, 2010-02)
      Master thesis (pre-Bologna period)
      Open Access
      En este proyecto se estudia el comportamiento al desgaste por deslizamiento de cuatro aceros representativos de las cuatro grandes familias de aceros inoxidables: ferrítico (AISI 446), austenítico (AISI 316), dúplex (AISI ...
    • Deformation mechanisms induced under high cycle fatigue tests in a metastable austenitic stainless steel 

      Roa Rovira, Joan Josep; Fargas Ribas, Gemma; Jiménez Piqué, Emilio; Mateo García, Antonio Manuel (2014)
      Article
      Restricted access - publisher's policy
      Advanced techniques were used to study the deformation mechanisms induced by fatigue tests in a metastable austenitic stainless steel AISI 301LN. Observations by Atomic Force Microscopy were carried out to study the evolution ...
    • Efecto del medio en el comportamiento al desgaste de aceros inoxidables 

      Bérodier, Elise (Universitat Politècnica de Catalunya, 2010-02)
      Master thesis (pre-Bologna period)
      Open Access
      Múltiples aplicaciones industriales requieren de materiales resistentes a la corrosión y al desgaste. Los aceros inoxidables, gracias a la presencia del cromo en su composición, se presentan como materiales ideales frente ...
    • Fatigue propagation of long cracks in metastable austenitic stainless steels 

      Martelo, D.F.; Mateo García, Antonio Manuel; Fargas Ribas, Gemma; Chapetti, M.D. (2013)
      Conference report
      Open Access
      Fatigue crack growth of a metastable austenitic stainless steel was investigated in thin specimen under positive stress ratio. Annealed and Co l d rolled conditions were used to test the influence of the microstructure. ...
    • Influence of substrate microstructure on the contact fatigue strength of coated cold-work tool steels 

      Llanes Pitarch, Luis Miguel; Ramirez, Giselle; Mestra Rodríguez, Álvaro Miguel; Casas, B.; Valls, Isaac; Martinez, R.; Bueno, R.; Goez, Alexey; Mateo García, Antonio Manuel (2012-02-25)
      Article
      Restricted access - publisher's policy
      The contact fatigue behavior of three microstructurally distinct tool steels coated with a physical vapor deposited TiN film is studied. Substrate microstructural differences come from variations in either chemical composition ...
    • Influencia del contenido de martensita en la vida a fatiga de aceros inoxidables austeníticos metaestables 

      El Ouali, Aicha (Universitat Politècnica de Catalunya, 2013-02)
      Master thesis (pre-Bologna period)
      Open Access
      Un acero inoxidable austenítico metaestable es una aleación que presenta una estructura austenítica que puede transformar a martensita por deformación. El acero tipo EN 1.4318/AISI 301 LN es conocido por su buena resistencia ...
    • Martensitic transformation during fatigue testing of an AISI 301LN stainless steel 

      Mateo García, Antonio Manuel; Fargas Ribas, Gemma (IOP Publishing. Institute of Physics, 2012-01-08)
      Article
      Open Access
      The plastic deformation accumulated during fatigue testing can induce the transformation of austenite to martensite in metastable austenitic stainless steels. To analyze this issue, a metastable austenitic stainless steel ...
    • Martensitic transformation during fatigue testing of an AISI 301LN steel 

      Mateo García, Antonio Manuel; Fargas Ribas, Gemma; Zapata Dederle, Ana Cristina (IOP Publishing. Institute of Physics, 2012)
      Article
      Open Access
      The plastic deformation accumulated during fatigue testing can induce the transformation of austenite to martensite in metastable austenitic stainless steels. To analyze this issue, a metastable austenitic stainless steel ...