Ara es mostren els items 22925-22944 de 86030

  • Design of the Wireless Telecommunication System of an Autonomous Solar Vehicle 

    Moyà Porcel, Rafel (Universitat Politècnica de Catalunya, 2011-03-28)
    Projecte/Treball Final de Carrera
    Accés obert
    English: The Automatic Control Lab at the Swiss Federal Institute of technology Zurich (ETH) is currently designing and building an autonomously driving solar vehicle (ASV). Having the size of a Radio Control Model Car, ...
  • Design of the workplace for a Delta Robot 

    Romeo Alba, Xavier (Universitat Politècnica de Catalunya / Zilinská Univerzita v Zilined, 2010)
    Projecte/Treball Final de Carrera
    Accés restringit per decisió de l'autor
    This project presents an introduction to parallel kinematic robots focused on Delta robot from the point of view of applications, kinematics, mechanics and investigation. The second part of the document shows the ...
  • Design of wind turbine rotors 

    Cañeque Fernández, Daniela (Universitat Politècnica de Catalunya / Tecnhische Universität München, 2014)
    Treball Final de Grau
    Accés restringit per decisió de l'autor
    The objective of the following assignment is to analyze a wind turbine of 10MW. The initial configuration, given in class, had a hub height of 119m. In our case, we have perturbed this height by increasing it 10%.
  • Design of Yagi-Uda antennas based on high-permittivity dielectric bulk materials 

    Bueno Díez, Miguel Ángel (Universitat Politècnica de Catalunya / Universität Stuttgart. Institut für Hochfrequenztechnik, 2012-06-28)
    Projecte/Treball Final de Carrera
    Accés obert
    [ANGLÈS] Dielectrics are insulators and they might therefore seem to be unlikely materials out of which to try and make antennas, but if they are excited in the right way they can be made to radiate very efficiently. Taking ...
  • Design optimization for a truncated catenary mooring system for scale model test 

    Molins i Borrell, Climent; Trubat Casal, Pau; Gironella Cobos, Xavier; Campos Hortigüela, Alexis (2015)
    Article
    Accés obert
    One of the main aspects when testing floating offshore platforms is the scaled mooring system, particularly with the increased depths where such platforms are intended. The paper proposes the use of truncated mooring systems ...
  • Design optimization for a truncated catenary mooring system for scale model tests 

    Molins i Borrell, Climent; Trubat Casal, Pau; Gironella Cobos, Xavier; Campos Hortigüela, Alexis (2014)
    Text en actes de congrés
    Accés restringit per política de l'editorial
    One of the main aspects when testing floating offshore platforms is the scaled mooring system, particularly with the increased depths where such platforms are intended. When the existing testing facilities do not have ...
  • Design optimization of a small quadrotor's electrical propulsion system 

    Saadé Latorre, Eva (Universitat Politècnica de Catalunya, 2011-06-08)
    Projecte Final de Màster Oficial
    Accés obert
    This thesis presents an approach for the optimization of the propulsion system of an unmanned lightweight quadrotor by introducing rotor aerodynamics and identifying methods to improve the electrical propulsion system ...
  • Design optimization of hazardous substance storage facilities to minimize project risk 

    Bernechea, Esteban; Arnaldos Viger, Josep (2013)
    Article
    Accés restringit per política de l'editorial
    The storage of dangerous substances is a high risk procedure: a historical analysis revealed that 17% of the major accidents associated with the chemical industry are related to this process. When a storage facility is ...
  • Design optimization of real estate tax and effect analysis in China 

    Guo, Jingjiuan; Hao, Aibo; Ren, Yipeng (OmniaScience, 2014-05)
    Article
    Accés obert
    Purpose: The objective of this research is to reform the current real estate tax system and establish the real estate tax system suitable for China’s national conditions. Design/methodology: Based on the necessity of ...
  • Design optimization of storage facilities taking into account the domino effect 

    Bernechea, Esteban; Arnaldos Viger, Josep (2012)
    Text en actes de congrés
    Accés obert
    Storing hazardous substances is a process that entrails high risk, and in which many resources are spent in the planning of safety measures; however, safety could be included at the initial stages of the design of this ...
  • Design optimization of storage terminals through the application of QRA 

    Bernechea, Esteban (Universitat Politècnica de Catalunya, 2013-09-19)
    Tesi
    Accés obert
    The storage of hazardous materials is a necessary part of the life cycle and operation of any process plant, which intrinsically entails certain hazards and dangers. The results of historical analysis reveal that 17% of ...
  • Design or improvement of fire hose drying system through technology research of fire hose maintenance sectors and other industrial sectors 

    Dollarhide, Christopher; Herrer Riu, Carlos Alberto; Kunze, Nadine; Sirven, Simon; Vitkus, Egidijus (Universitat Politècnica de Catalunya, 2010-06-04)
    Projecte/Treball Final de Carrera
    Accés obert
    Realitzat a/amb: Fachhochschule Kiel
    In this project, provided by Rud. Prey GmbH & Co. KG, we focussed on methods for drying fire hoses, and based on this design or improve a fire hose drying system. Nowadays, many different systems for this purpose exist ...
  • Design principles and performance evaluation of mSCTP-CMT for transport-layer based handover 

    Budzisz, Lukasz; Ferrús Ferré, Ramón Antonio; Casadevall Palacio, Fernando José (2009-04)
    Text en actes de congrés
    Accés obert
    Handling mobility at the transport layer is a promising approach to achieve seamless handover in the context of heterogeneous wireless access networks. In particular, features such as multihoming and dynamic address ...
  • Design procedure for a longitudinal flux flat linear switched reluctance motor 

    Garcia Amoros, Jordi; Andrada Gascón, Pedro; Blanqué Molina, Balduino (2011-12-12)
    Article
    Accés restringit per política de l'editorial
    This article presents a new comprehensive design procedure for longitudinal flux flat linear switched reluctance motors. The design process comprises all the steps from detailing the specifications to sizing the prototype ...
  • Design procedures for the use of EB FRP in shear strengthening of reinforced concrete beams 

    Vasic, Mira (Universitat Politècnica de Catalunya, 2011-09-02)
    Projecte Final de Màster Oficial
    Accés obert
    The aim of this work is assessment and analysis of the reliability of the most well-known design models, available for the prediction of the contribution of fiber reinforced polymer (FRP) systems to the shear capacity of ...
  • Design project knowledge sharing in G-SCOP laboratory 

    Asenjo Sànchez, Melissa (Universitat Politècnica de Catalunya / Institut National Polytechnique de Grenoble, 2009)
    Projecte/Treball Final de Carrera
    Accés restringit per decisió de l'autor
    This Project wants to give a solution to all the information provided every year by the GSCOP laboratory referred to components used and possible haptic devices which can be bought for further studies on visualization and ...
  • Design project semester 

    Segalàs Coral, Jorge (Universitat Politècnica de Catalunya. Institut de Ciències de l'Educació, 2012-02-07)
    Text en actes de congrés / Comunicació de congrés
    Accés obert
  • Design quality metrics for object-oriented software development 

    Peralta Giménez, Alonso Joaquín; Serras, Joan; Slavkova Hernández, Ólga (1995-01)
    Report de recerca
    Accés obert
    The availability of metrics for measuring software design quality and complexity are a great help in the development of such systems. Applications of such metrics in the initial stage of the software development process ...
  • Design rules and optimization of electro-optic modulators based on coplanar waveguides 

    Ibarra Fusté, José Antonio (Universitat Politècnica de Catalunya, 2014-02-03)
    Tesi
    Accés obert
    Electro-optical traveling wave modulators (EO-TWM) are basic building blocks of the optical communications industry which is leading a revolution in the way we communicate, work and live. As a result, the demand for ...
  • Design rules to implement self-calibrated differential temperature sensors 

    Ruiz González, Sergio (Universitat Politècnica de Catalunya, 2016)
    Projecte/Treball Final de Carrera
    Accés obert
    The goal of this project is to present a new differential temperature sensor architecture that can digitally compensate for the thermal offset. First, the sources of thermal offset and its implications in temperature ...