Ara es mostren els items 54-73 de 104

    • Methodology for the improvement of the AINA code wall-model applied to DEMO WCPB blanket 

      Fabbri, Marco; Blas del Hoyo, Alfredo de; Riego Pérez, Albert; Dies Llovera, Javier; Zamora Poveda, Imanol; Baeza Pérez, Eduard (2017-11)
      Article
      Accés obert
      The present work describes and supports the methodology for the improvement of the wall model devel-oped in AINA and its specific application to the Japanese DEMO Water Cooled Pebbled Bed. The set-upand application of this ...
    • Micromobility safety applications using AI 

      Valls Mascaró, Esteve (Universitat Politècnica de Catalunya, 2020-06-28)
      Treball Final de Grau
      Accés obert
      Population massification in large cities has recently encouraged the use of micro vehicles, which simplifies and speeds up the mobility of their users. The aim of this thesis is to improve the safety of these vehicles ...
    • Microscopic modeling of connected autonomous vehicles platooning: stability and safety analysis 

      Moode, Seshadri Naik; Soriguera Martí, Francesc (Elsevier, 2023-11-22)
      Article
      Accés obert
      With recent advancements in the research and application of robotics, sensory devices, and Intelligent Transport Systems, autonomous vehicles are expected to become an integral part of the future transportation system. ...
    • Modelación numérica de deslizamientos de ladera en embalses mediante el Método de Partículas y Elementos Finitos (PFEM) 

      Salazar González, Fernando; Oñate Ibáñez de Navarra, Eugenio; Morán Moya, Rafael (2012-04)
      Article
      Accés obert
      The paper presents the results of the application of the Particle Finite Element Method (PFEM) to the analysis of landslides in reservoirs. This is a complex phenomenon, because of the interaction between the landslide, ...
    • Modeling injury rates as a function of industrialized versus on-site construction techniques 

      Rubio Romero, Juan Carlos; Suárez Cebador, Manuel; Abad Puente, Jesús (2014-05)
      Article
      Accés restringit per política de l'editorial
      It is often predicted that the industrialization of building activities will lead to a reduction of accident rates in the construction sector, particularly as a result of switching activities from building sites to factories. ...
    • Modelling the confidence of timing analysis for time randomised caches 

      Benedicte Illescas, Pedro; Kosmidis, Leonidas; Quiñones, Eduardo; Abella Ferrer, Jaume; Cazorla Almeida, Francisco Javier (Institute of Electrical and Electronics Engineers (IEEE), 2016)
      Text en actes de congrés
      Accés obert
      Timing is a key non-functional property in embedded real-Time systems (ERTS). ERTS increasingly require higher levels of performance that can only be sensibly provided by deploying high-performance hardware, which however ...
    • Monte carlo simulation as a tool to show the influence of the human factor into the quantitative risk assessment 

      González Dan, José Roberto; Guix Pujolar, Alan; Martí Gregorio, Vicenç; Arnaldos Viger, Josep; Darbra Roman, Rosa Maria (2016-07)
      Article
      Accés obert
      The frequency of occurrence of an accident is a key aspect in the risk assessment field. Vari- ables such as the human factor (HF), which is a major cause of undesired events in process industries, are usually not considered ...
    • Occupational risk index for assessment of risk in construction work by activity 

      Casanovas Rubio, Maria del Mar; Armengou, Jaume; Ramos Schneider, Gonzalo (2014-01)
      Article
      Accés obert
      The concern for occupational health and safety in construction work is reflected in the many preventive measures taken. However, examples of the systematic assessment of project alternatives aimed at minimizing occupational ...
    • On Neural Networks Redundancy and Diversity for Their Use in Safety-Critical Systems 

      Brando, Axel; Serra, Isabel; Mezzetti, Enrico; Cazorla Almeida, Francisco Javier; Perez Cerrolaza, Jon; Abella Ferrer, Jaume (Institute of Electrical and Electronics Engineers (IEEE), 2023-05)
      Article
      Accés obert
      An increasing number of critical functionalities integrated in embedded critical systems rely on deep learning (DL) technology. This article summarizes certain key aspects of DL’s intrinsic stochastic and training-data-dependent ...
    • On the assessment of probabilistic WCET estimates reliability for arbitrary programs 

      Milutinovic, Suzana; Abella Ferrer, Jaume; Cazorla, Francisco (2017-04-11)
      Article
      Accés obert
      Measurement-Based Probabilistic Timing Analysis (MBPTA) has been shown to be an industrially viable method to estimate the Worst-Case Execution Time (WCET) of real-time programs running on processors including several ...
    • On the safe deployment of matrix multiplication in massively parallel safety-related systems 

      Fernández Muñoz, Javier; Pérez Cerrolaza, Jon; Agirre, Irune; Calderón Torres, Alejandro Josué; Abella Ferrer, Jaume; Cazorla Almeida, Francisco Javier (2022-04-08)
      Article
      Accés obert
      Deep learning technology has enabled the development of increasingly complex safety-related autonomous systems using high-performance computers, such as graphics processing units (GPUs), which provide the required high ...
    • Padding Aware Neurons 

      Garcia Gasulla, Dario; Giménez Ábalos, Víctor; Martin Torres, Pablo Agustin (Institute of Electrical and Electronics Engineers (IEEE), 2023)
      Text en actes de congrés
      Accés obert
      Convolutional layers are a fundamental component of most image-related models. These layers often implement by default a static padding policy (e.g. zero padding), to control the scale of the internal representations, and ...
    • PFS - Qualification methodology for ISO26262 certification of automotive SoC systems 

      Fiorucci, Tiziano (2022-05)
      Text en actes de congrés
      Accés restringit per política de l'editorial
      This thesis proposes to develop a methodology for reliability metrics extraction for Electronic System. The targeted standard is ISO26262 and the declination of the different reliability metrics in the case of a digital ...
    • Platooning of connected autonomous vehicles in freeway traffic: state of the art 

      Moode, Seshadri Naik; Soriguera Martí, Francesc (Elsevier, 2023-11-22)
      Article
      Accés obert
      Connected and Autonomous Vehicle (CAV) technologies have the potential to disrupt and change transportation networks and impact on mobility patterns. CAVs have faster response times and can better grasp traffic conditions ...
    • POS2 - Effective techniques for automatically improving the transition delay fault coverage of Self-Test Libraries 

      Cantoro, Riccardo; Garau, Francesco; Girard, Patrick; Kolahimahmoudi, Nima; Sartoni, Sandro; Reorda, Matteo Sonza; Virazel, Arnaud (2022-05)
      Text en actes de congrés
      Accés restringit per política de l'editorial
      In-field test of integrated circuits using Self-Test Libraries (STLs) is a widely used technique specifically suited to guarantee the processor’s correct behavior during the operative lifetime, as mandated by functional ...
    • Prognosis of quality sensors in the Barcelona drinking water network 

      García Valverde, Diego; Creus Rodriguez, Ramon; Minoves Ruiz, Meritxell; Pardo, Xavier; Quevedo Casín, Joseba Jokin; Puig Cayuela, Vicenç (IEEE Press, 2016)
      Text en actes de congrés
      Accés obert
      One of the most important areas of the water utilities is the water quality management. This area is responsible of guaranteeing safety in the water supply to the citizens. The strategy to guarantee the safety is based on ...
    • Project to improve facilities and equipment of an industrial plant dedicated to soy bean crushing 

      Tmimi Akkaoui, Chaimae (Universitat Politècnica de Catalunya, 2019-06)
      Treball Final de Grau
      Accés restringit per decisió de l'autor
      Realitzat a/amb:   Cargill
      The continuous improvement of an industrial plant is crucial to keep safety and leading its sector. It is focused on increasing the productivity, the quality and the motivation of the employees. The aim of the current ...
    • Projecte d'electrificació d'un polígon comercial 

      Duran Alemany, Jordi (Universitat Politècnica de Catalunya, 2022-01-29)
      Treball Final de Grau
      Accés restringit per decisió de l'autor
      Realitzat a/amb:   EDISTRIBUCIÓN Redes Digitales
      El present projecte és una solució per electrificar una nova urbanització de naus comercials a Vilafranca del Penedès, amb tota la infraestructura elèctrica necessària per proporcionar subministrament elèctric a totes les ...
    • Re-diseño de una barrera de seguridad para la protección vial menos dañina con el colectivo motorista 

      Tejero Franco, Oscar (Universitat Politècnica de Catalunya, 2021-07-12)
      Treball Final de Grau
      Accés obert
      El ser humano lleva utilizando vehículos a motor como herramienta para ampliar su movilidad desde el siglo XIX y antes de los vehículos a motor, el ser humano era capaz de recorrer grandes distancias gracias a la tracción ...
    • Rehological study of aluminium a356 alloys 

      Laporta Pérez, Oriol (Universitat Politècnica de Catalunya, 2020-11-20)
      Treball Final de Grau
      Accés restringit per decisió de l'autor
      This project aims to complete the validation and improve and optimize the experimentation process to obtain a globular microstructure of Aluminum A356 using a crucible and a stir bar, to obtain results from the viscosity ...