Exploració per altres contribucions "Universitat Politècnica de Catalunya. MNT - Grup de Recerca en Micro i Nanotecnologies"
Ara es mostren els items 1-20 de 521
-
2D/3D Simulations of black-silicon interdigitated back-contacted c-si(n) solar cells
(WIP Renewable Energies, 2016)
Comunicació de congrés
Accés obertBlack silicon (b-Si) reduces drastically light reflectance in the front side of c-Si solar cells to values near zero for the whole absorbed solar spectrum. In this work, we apply 2D and 3D simulations to explore the ... -
3Cat-1 project: a multi-payload CubeSat for scientific experiments and technology demonstrators
(2017)
Article
Accés obertThis article introduces 3 Cat-1, the first project of the Technical University of Catalonia to build and launch a nano-satellite. Its main scope is to develop, construct, assemble, test and launch into a low Earth orbit a ... -
3Cat-1: a multi-payload Cubesat-based scientific and technology demonstrator
(European Spatial Agengy (ESA), 2014)
Comunicació de congrés
Accés obert -
3D metallo-dielectric structures combining electrochemical and electroplating techniques
(2010-06)
Article
Accés restringit per política de l'editorialThree-dimensional (3D) periodic nickel micro-structures with a periodicity of 4 μm and high number of structural periods were fabricated by electrodeposition. Macroporous silicon, consisting of periodic arrays of sine-wave ... -
3D simulations of back-contact back-junction c-Si(P) solar cells with doped point contacts
(2013)
Text en actes de congrés
Accés restringit per política de l'editorialThe back-contact back-junction BC-BJ solar cell concept is a promising photovoltaic structure for both laboratory and industrial c-Si solar cells. High efficiency devices based on this concept have been reported in the ... -
3D simulations of interdigitated back-contacted crystalline silicon solar cells on thin substrates
(2018-06-01)
Article
Accés obertInterdigitated back contact technology is a promising candidate to be applied to thin crystalline silicon solar cells because of its simpler one-side interconnection while allowing a more flexible front surface treatment. ... -
3D TCAD modeling of laser processed c-Si solar cells
(Institute of Electrical and Electronics Engineers (IEEE), 2015)
Text en actes de congrés
Accés restringit per política de l'editorialThis paper presents an 3D TCAD model of crystalline Silicon (c-Si) solar cells. Physical parameters used in the model are discussed. Simulation results are compared to experimental current-voltage curves and solar cell ... -
A compact charge ratio expression for the emitter delay of polysilicon emitter bipolar transistors
(1994-03)
Article
Accés obertA compact solution for the ratio of the excess minority carrier charge stored into the polysilicon to the charge stored in the single crystal part of the emitter of a polysilicon emitter bipolar transistor is derived. The ... -
A compact tetrathiafulvalene-benzothiadiazole dyad and its highly symmetrical charge-transfer salt: Ordered donor p-stacks closely bound to their acceptors
(2014-06-02)
Article
Accés restringit per política de l'editorialA compact and planar donor-acceptor molecule 1 comprising tetrathiafulvalene (TTF) and benzothiadiazole (BTD) units has been synthesised and experimentally characterised by structural, optical, and electrochemical methods. ... -
A critical analysis on the role of back surface passivation for a-Si/c-Si heterojunction solar cells
(Institute of Electrical and Electronics Engineers (IEEE), 2014)
Comunicació de congrés
Accés restringit per política de l'editorialBack surface passivation is a well-known method to reduce carrier recombination and hence improves the efficiency of crystalline silicon solar cells. In this manuscript, we critically analyze the role of this process for ... -
A crosstalk latch circuit design
(Institute of Electrical and Electronics Engineers (IEEE), 1990)
Text en actes de congrés
Accés restringit per política de l'editorialA D-latch sequential circuit design is presented that exhibits an elevated degree of tolerance to common and differential mode noise in the clock lines. The circuit tolerates noise voltages in the clock signals in the range ... -
A CubeSAT payload for in-situ monitoring of pentacene degradation due to atomic oxygen etching in LEO
(2016-09-01)
Article
Accés obertThis paper reports and discusses the design and ground tests of a CubeSat payload which allows to measure, in-situ and in real time, the degradation of a polymer of electronic interest due to atomic oxygen etching in LEO. ... -
A million-channel CO-PrOx microreactor on a fingertip for fuel cell application
(2010)
Article
Accés restringit per política de l'editorialA silicon micromonolith containing ca.40000 regular channels of 3.3 μm in diameter per square millimeter has been successfully functionalized with anAu/TiO2 catalyst for CO preferential oxidation(CO-PrOx) in the presence ... -
A million-microchannel multifuel steam reformer for hydrogen production
(2020-05-05)
Article
Accés obertA functionalized silicon micromonolith of 7 mm in diameter and 210 μm-thick was evaluated for the production of hydrogen from the steam reforming (SR) of various fuels, containing different functional groups, such as ... -
A miniaturized 3d heat flux sensor to characterize heat transfer in regolith of planets and small bodies
(Multidisciplinary Digital Publishing Institute (MDPI), 2020-08-01)
Article
Accés obertThe objective of this work is to present the first analytical and experimental results obtained with a 3D heat flux sensor for planetary regolith. The proposed structure, a sphere divided in four sectors, is sensible to ... -
A miniaturized two axis sun sensor for attitude control of nano-satellites
(2010-10-10)
Article
Accés obertThis paper describes the design, fabrication, characterization, and satellite integration of a miniaturized two axis sun sensor which has been used in the attitude control system of the Spanish nano-satellite NANOSAT-1B. ... -
A new design of high precision solar microsensor for satellite aplications
(IEEE, 2010)
Text en actes de congrés
Accés restringit per política de l'editorialThis paper shows the design and calibration of an improved miniaturized two-axis sun sensor for satellite attitude control. The proposed new structure is based on a previous sun sensor structure by adding multiple sensing ... -
A novel Σ-Δ pulsed digital oscillator (PDO) for MEMS
(IEEE, 2005-12)
Article
Accés obertA novel digital oscillator topology for microelectromechanical systems (MEMS) based on bandpass sigma–delta modulation is presented. Short pulses of force of the same amplitude maintain the oscillation and the associated ... -
A prototype reactor for highly selective solar-driven CO2 reduction to synthesis gas using nanosized earth-abundant catalysts and silicon photovoltaics
(2017-10)
Article
Accés obertThe conversion of carbon dioxide (CO2) into value-added chemicals and fuels, preferably using renewable energy and earth-abundant materials, is considered a key priority for future energy research. In this work, a bias-free ... -
A rapid, low-cost, and scalable technique for printing state-of-the-art organic field-effcet transistors
(2016-06-13)
Article
Accés obertIn the last few years exciting advances have been achieved in developing printing techniques for organic semiconductors, and impressive mobility values have been reported for the resulting organic field-effect transistors ...