Exploració per altres contribucions "Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica"

Ara es mostren els items 1-20 de 6959

    • 1-D memristor networks as ternary storage cells 

      Vourkas, Ioannis; Abusleme, Angel; Sirakoulis, Georgios; Rubio Sola, Jose Antonio (Institute of Electrical and Electronics Engineers (IEEE), 2016)
      Text en actes de congrés
      Accés restringit per política de l'editorial
      Due to its inherent analog nature, the memristor can store information in a continuous form, being thus well-suited for compact multi-bit memory cell technology. In this context, threshold-type switching devices show great ...

    • 2 transistors + 2 diodes-based PEBB designed for general applications in power electronics 

      Nicolás Apruzzese, Joan; Rocabert Delgado, Joan; Bordonau Farrerons, José; Busquets Monge, Sergio; Alepuz Menéndez, Salvador; Martínez Velasco, Juan Antonio; Peracaula Roura, Joan (2009)
      Comunicació de congrés
      Accés obert
      This paper presents a new Power Electronic Building Block (PEBB) designed to facilitate the implementation of different power converter topologies. The proposed PEBB consists of two diodes and two transistors and it can ...

    • 2-step process for 5.4% CuGaSe2 solar cell using fluorine doped tin oxide transparent back contacts 

      Thomere, Angélica; Placidi, Marcel Jose; Guc, Maxim; Tiwari, Kunal Jogendra; Fonoll Rubio, Robert; Izquierdo Roca, Víctor; Perez Rodriguez, Alejandro; Jehl Li-Kao, Zacharie (2023)
      Article
      Accés obert
      As single-junction solar cells are approaching theoretical limits, multijunction solar cells are becoming increasingly relevant, and low-cost wider bandgap light harvesters in tandem with silicon are the next frontier in ...

    • 2D Liquid Lens Based on EWOD 

      Ahmadi Zeidabadi, Maziar (Universitat Politècnica de Catalunya, 2012-09-10)
      Projecte Final de Màster Oficial
      Accés obert
      [ANGLÈS] This thesis presents the fabrication, development and characteristics of a liquid lens based on electrowetting. Essentially, when the lens is in liquid form, both its position and its curvature can be reversibly ...

    • 2D/3D Simulations of black-silicon interdigitated back-contacted c-si(n) solar cells 

      Calle Martín, Eric; Carrió, David; Ortega Villasclaras, Pablo Rafael; von Gastrow, Guillaume; Savin, Hele; Martín García, Isidro; Alcubilla González, Ramón (WIP Renewable Energies, 2016)
      Comunicació de congrés
      Accés obert
      Black silicon (b-Si) reduces drastically light reflectance in the front side of c-Si solar cells to values near zero for the whole absorbed solar spectrum. In this work, we apply 2D and 3D simulations to explore the ...

    • 3Cat-1 project: a multi-payload CubeSat for scientific experiments and technology demonstrators 

      Jové Casulleras, Roger; Araguz López, Carles; Via Ortega, Pol; Solanellas Bofarull, Arnau; Amézaga Sarries, Adrià; Vidal Mateu, David; Muñoz Martin, Joan Francesc; Marí Barceló, Marc; Olivé Muñiz, Roger; Sáez Hernández, Alberto; Jané Abad, Jaume; Bou Balust, Elisenda; Iannazzo Soteras, Mario Enrique; Gorreta Mariné, Sergio; Ortega Villasclaras, Pablo Rafael; Pons Nin, Joan; Domínguez Pumar, Manuel; Alarcón Cot, Eduardo José; Ramos Castro, Juan José; Camps Carmona, Adriano José (2017)
      Article
      Accés obert
      This article introduces 3 Cat-1, the first project of the Technical University of Catalonia to build and launch a nano-satellite. Its main scope is to develop, construct, assemble, test and launch into a low Earth orbit a ...

    • 3Cat-1: a multi-payload Cubesat-based scientific and technology demonstrator 

      Jové Casulleras, Roger; Camps Carmona, Adriano José; Ramos Castro, Juan José; Alarcón Cot, Eduardo José; Bou Balust, Elisenda; Carreño Luengo, Hugo; Amézaga Sarries, Adrià; Olivé Muñiz, Roger; Vidal Mateu, David; Muñoz Martin, Joan Francesc; Araguz López, Carles; Marí Barceló, Marc; Ortega Villasclaras, Pablo Rafael; Pons Nin, Joan; Gorreta Mariné, Sergio; Domínguez Pumar, Manuel; Iannazzo Soteras, Mario Enrique (European Spatial Agengy (ESA), 2014)
      Comunicació de congrés
      Accés obert

    • 3Cat-1: Attitude determination and control subsystem design 

      Vidal Mateu, David (Universitat Politècnica de Catalunya, 2013-12-10)
      Treball Final de Grau
      Accés obert
      [ANGLÈS] This project is focused on the design and implementation of an attitude control system for the satellite 3Cat-1. Using a passive system cwith permanent magnets and an active system, consisting of a coil as actuator.

    • 3CAT-2: a 6U CibeSat-based multi-constellation, dual-polarization, and dual-frequency GNSS-RO experimental mission 

      Carreño Luengo, Hugo; Amézaga Sarries, Adrià; Bolet, Albert; Vidal Mateu, David; Jané, Jaume; Muñoz Martin, Joan Francesc; Olivé Muñiz, Roger; Camps Carmona, Adriano José; Carola, Jorge; Catarino, Nuno; Hagenfeldt, Miguel; Palomo, Pedro; Cornara, Stefania (2015)
      Text en actes de congrés
      Accés restringit per política de l'editorial
      Cat-2 Assembly, Integration and Verification (AIV) activities of the Engineering Model (EM) and the Flight Model (FM) are being carried out at present. The Attitude Determination and Control System (ADCS) and Flight ...

    • 3D bunch-by-bunch feedback system at ANKA to increase storable beam current 

      Egidos Plaja, Núria (Universitat Politècnica de Catalunya, 2016-09-21)
      Projecte Final de Màster Oficial
      Accés obert
      Realitzat a/amb:   Karlsruher Institut für Technologie
      In the ANKA storage ring, a digital state-of-the-art Bunch-By-Bunch (BBB) feedback system provides damping of Coupled-Bunch-Instabilities (CBI) in order to increase the maximum storable beam current and lifetime. Performance ...

    • 3D mapping of a capacitive switch using a three-axis robot 

      Martín García, Oriol (Universitat Politècnica de Catalunya, 2017-10)
      Treball Final de Grau
      Accés restringit per decisió de l'autor

    • 3D metallo-dielectric structures combining electrochemical and electroplating techniques 

      Hernández Díaz, David; Lange, D.; Todorov Trifonov, Trifon; Garin Escriva, Moises; García Molina, Francisco Miguel; Rodríguez Martínez, Ángel; Alcubilla González, Ramón (2010-06)
      Article
      Accés restringit per política de l'editorial
      Three-dimensional (3D) periodic nickel micro-structures with a periodicity of 4 μm and high number of structural periods were fabricated by electrodeposition. Macroporous silicon, consisting of periodic arrays of sine-wave ...

    • 3D printed probe for simultaneous E and H fields measurements 

      Quílez Figuerola, Marcos; Pous Solà, Marc; Mateu Mateus, Marc; Solé Lloveras, Jordi; Silva Martínez, Fernando (Institute of Electrical and Electronics Engineers (IEEE), 2022)
      Text en actes de congrés
      Accés obert
      Additive manufacturing using conductive polylactic acid (PLA) is an emerging technology. This work presents a double-loaded loop probe made of conductive PLA and evaluates its performance compared to a previous design built ...

    • 3D simulations of back-contact back-junction c-Si(P) solar cells with doped point contacts 

      Carrió Díaz, David; Ortega Villasclaras, Pablo Rafael; López, Gema; López González, Juan Miguel; Martín García, Isidro; Voz Sánchez, Cristóbal; Alcubilla González, Ramón (2013)
      Text en actes de congrés
      Accés restringit per política de l'editorial
      The back-contact back-junction BC-BJ solar cell concept is a promising photovoltaic structure for both laboratory and industrial c-Si solar cells. High efficiency devices based on this concept have been reported in the ...

    • 3D simulations of interdigitated back-contacted crystalline silicon solar cells on thin substrates 

      Jin, Chen; Martín García, Isidro; Ortega Villasclaras, Pablo Rafael; Calle Martín, Eric; Alcubilla González, Ramón (2018-06-01)
      Article
      Accés obert
      Interdigitated back contact technology is a promising candidate to be applied to thin crystalline silicon solar cells because of its simpler one-side interconnection while allowing a more flexible front surface treatment. ...

    • 3D TCAD modeling of laser processed c-Si solar cells 

      López González, Juan Miguel; Martín García, Isidro; Ortega Villasclaras, Pablo Rafael; Orpella García, Alberto; Alcubilla González, Ramón (Institute of Electrical and Electronics Engineers (IEEE), 2015)
      Text en actes de congrés
      Accés restringit per política de l'editorial
      This paper presents an 3D TCAD model of crystalline Silicon (c-Si) solar cells. Physical parameters used in the model are discussed. Simulation results are compared to experimental current-voltage curves and solar cell ...

    • 4H-SiC Integrated circuits for high temperature and harsh environment applications 

      Alexandru, Mihaela (Universitat Politècnica de Catalunya, 2013-09-10)
      Tesi
      Accés obert
      Silicon Carbide (SiC) has received a special attention in the last decades thanks to its superior electrical, mechanical and chemical proprieties. SiC is mostly used for applications where Silicon is limited, becoming a ...

    • 5GHz CMOS all-pass filter-based true time delay cell 

      Aghazadeh Dafsari, Seyed Rasoul; Martínez García, Herminio; Saberkari, Alireza (Multidisciplinary Digital Publishing Institute (MDPI), 2020)
      Capítol de llibre
      Accés obert
      Analog CMOS time-delay cells realized by passive components, e.g., lumped LC delay lines, are inefficient in terms of area for multi-GHz frequencies. All-pass filters considered as active circuits can, therefore, be the ...

    • 5GHz CMOS all-pass filter-based true time delay cell 

      Aghazadeh Dafsari, Seyed Rasoul; Martínez García, Herminio; Saberkari, Alireza (2018-12-22)
      Article
      Accés obert
      Analog CMOS time-delay cells realized by passive components, e.g., lumped LC delay lines, are inefficient in terms of area for multi-GHz frequencies. All-pass filters considered as active circuits can, therefore, be the ...

    • 5GHz CMOS all–pass filter–based true time delay cell 

      Aghazadeh Dafsari, Seyed Rasoul; Martínez García, Herminio; Saberkari, Alireza (2018-12-22)
      Article
      Accés obert
      Analog CMOS time-delay cells realized by passive components, e.g., lumped LC delay lines, are inefficient in terms of area for multi-GHz frequencies. All-pass filters considered as active circuits can, therefore, be the ...