Exploració per altres contribucions "Aalto-yliopisto"
Ara es mostren els items 1-8 de 8
-
A 3D Terrain Generator: Enhancing Robotics Simulations with GANs
(Universitat Politècnica de Catalunya, 2023-07-06)
Treball Final de Grau
Accés obert
Realitzat a/amb: Aalto-yliopistoSimulation is essential in robotics to evaluate models and techniques in a controlled setting before conducting experiments on tangible agents. However, developing simulation environments can be a challenging and time-consuming ... -
Analysis of Waste Heat to Power Technologies in a Maritime Engine System
(Universitat Politècnica de Catalunya, 2023-11-01)
Projecte Final de Màster Oficial
Accés obert
Realitzat a/amb: Aalto-yliopisto / WärtsiläIn EU, maritime transport sector contributed to emit 124 million tonnes of CO2 in 2021 (or equal to around 3-4% of EU total CO2 emissions). This could grow even higher in the future since maritime transport is considered ... -
Enhancement of methane production from the anaerobic digestion of chemical pulp and paper mill effluents
(Universitat Politècnica de Catalunya, 2018-05-04)
Tesi
Accés obert
Realitzat a/amb: Aalto-yliopistoSustainability of resources such as energy, water and waste have become important drivers in our current economy. For large industries that are water and energy intensive like pulp and paper (P&P) mills, this is a specifically ... -
Estandardització del procés d’anàlisi de dades hiperdimensionals generades per citometria de flux amb eines d’aprenentatge automàtic
(Universitat Politècnica de Catalunya, 2023-06-30)
Treball Final de Grau
Accés restringit per acord de confidencialitat
Realitzat a/amb: Institut de Recerca Germans Trias i Pujol / Aalto-yliopistoLa citometria de flux és una de les principals eines d'anàlisi cel·lular des de fa més de quaranta anys i és present tant en els laboratoris de recerca com en diagnòstic clínic. Les poblacions cel·lulars convencionalment ... -
Finite elements analysis of stresses in beam structures
(Universitat Politècnica de Catalunya / Aalto University, 2010)
Projecte/Treball Final de Carrera
Accés obert
Realitzat a/amb: Aalto-yliopistoThis Final project deals with determining of stresses in beam structures. First, warping function based on finite element formulations for determining shear stresses at beam cross-sections under biaxial bending and ... -
Measurement and Analysis of radio wave propagation in an indoor environment at 28 GHz
(Universitat Politècnica de Catalunya, 2022-07-05)
Treball Final de Grau
Accés obert
Realitzat a/amb: Aalto-yliopistoMillimeter wave frequencies are utilized in modern wireless systems to satisfy the increasing demand in bandwidth. This study aims to gain more knowledge of radio wave propagation in an entrance hall environment at 28 GHz ... -
Multi-label classification of a hydraulic system using Machine Learning methods
(Universitat Politècnica de Catalunya, 2022-10-27)
Projecte Final de Màster Oficial
Accés obert
Realitzat a/amb: Aalto-yliopistoIn this project, a condition monitoring of a hydraulic system has been developed. The research consisted of a health categorization of the most relevant physical and non-physical elements of the system. The objective has ... -
Trimethoprim degradation using high frequency ultrasonication
(Universitat Politècnica de Catalunya, 2021-09-10)
Projecte Final de Màster Oficial
Accés obert
Realitzat a/amb: Aalto-yliopistoMicropollutants such as antibiotics are becoming a challenge. One of the most used antibiotics is Trimethoprim. Conventional wastewater treatment plants are not efficient in removing these contaminants due to their poor ...