• Aliviaderos escalonados sin cajeros laterales. Projecto ALIVESCA 

      Estrella, Soledad; Sánchez Juny, Martí; Pomares Abad, Juan; Dolz Ripollès, Josep; Ibáñez de Aldecoa, Rafael; Domínguez, María; Rodríguez, Jesús; Balairón, Luis; David, López (Universitat Politècnica de Catalunya. Escola Tècnica Superior d'Enginyers de Camins Canals i Ports de Barcelona, 2011-11-15)
      Comunicació de congrés
      Accés obert
      En el presente trabajo se muestran los primeros resultados del proyecto de investigación aplicada colaborativa entre el Instituto de Investigación FLUMEN de la Universidad Politécnica de Catalunya (UPC), el Centro de ...
    • Determinación de la tenacidad de fractura umbral de polipropilenos en la región de transición dúctil-frágil 

      Salazar, Alicia; Rodríguez, Jesús; Martínez Benasat, Antonio; Frontini, Patricia (2011)
      Text en actes de congrés
      Accés obert
    • Fracture toughness reliability in polycarbonate: notch sharpening effects 

      Salazar, Alicia; Rodríguez, Jesús; Martínez Benasat, Antonio (2014-01-06)
      Article
      Accés obert
      The effect of the notch sharpening on the fracture toughness obtained under linear elastic fracture mechanics has been analyzed in an amorphous polycarbonate. The samples for fracture characterization were sharpened via ...
    • Influence of the injection moulding parameters on the cellular structure and thermo mechanical properties of ethylene-propylene block copolymer and PETG foams 

      Arencón Osuna, David; Sánchez Soto, Miguel; Martínez Benasat, Antonio; Gómez Gómez, Jaime Francisco; Rodríguez, Jesús; Salazar, Alicia (2012)
      Text en actes de congrés
      Accés restringit per política de l'editorial
      Microcellular injection moulding technology is capable of producing lightweight polymeric products. Microcellular foams are characterised by cell densities in the order of 109-1015 cells per cm3 and cell sizes between 10-100 ...
    • Influence of the notch sharpening on the fracture toughness of bulk ethylene-propylene block copolymers 

      Salazar, Alicia; Rodríguez, Jesús; Segovia, Angélica; Martínez Benasat, Antonio (2010-03-02)
      Article
      Accés restringit per política de l'editorial
      The effect of the notch sharpening procedure on the fracture toughness computed under linear-elastic and elastic-plastic conditions (at low and high loading rates, respectively) of a bulk ethylene–propylene block copolymer ...
    • Recent trends in stepped spillway design: behaviour without sidewalls 

      Estrella Toral, Soledad; Sánchez Juny, Martí; Dolz Ripollès, Josep; Ibáñez de Aldecoa, R.; Rodríguez, Jesús; Balairón, Luis (International Commission on Large Dams (ICOLD), 2012)
      Text en actes de congrés
      Accés restringit per política de l'editorial
      Until now, hydraulic research of stepped spillways has focused on characterizing aspects as: the different types of flow that occur on the dam, the air inception processes, the potential negative effects associated to the ...
    • Relevance of the femtolaser notch sharpening to the fracture of ethylene-propylene copolymers 

      Salazar, Alicia; Rodríguez, Jesús; Segovia, Angélica; Martínez Benasat, Antonio (2010-02-17)
      Article
      Accés restringit per política de l'editorial
      The effect of the notch sharpening on the fracture toughness measured under Linear Elastic Fracture Mechanics (LEFM), Elastic–Plastic Fracture Mechanics (EPFM) and Post-Yielding Fracture Mechanics (PYFM) approaches has ...
    • The role of notch sharpening on the J-fracture toughness of thermoplastic polymers 

      Salazar, Alicia; Rodríguez, Jesús; Martínez Benasat, Antonio (2013-04-02)
      Article
      Accés restringit per política de l'editorial
      The effect of the notch sharpening on the fracture toughness obtained under Elastic–Plastic Fracture Mechanics (EPFMs) approach has been analyzed in two different types of thermoplastic polymers, a semicrystalline multi-phase ...
    • The role of notching damage on the fracture parameters of ethylene propylene block copolymers 

      Salazar, Alicia; Segovia, Angélica; Martínez Benasat, Antonio; Rodríguez, Jesús (2010-03-26)
      Article
      Accés restringit per política de l'editorial
      The influence of the notching procedure on the fracture toughness measured via Elastic- Plastic Fracture Mechanics has been analyzed on four different ethylene-propylene block copolymers with two distinct dimensions, ...