Exploració per tema "Mesurament -- Instruments"
Ara es mostren els items 21-33 de 33
-
Measurements methods of composite materials for aircrafts applications
(Universitat Politècnica de Catalunya, 2011-03-22)
Treball Final de Grau
Accés restringit per decisió de l'autorThe following thesis is the study and research of two main points that they might be related at some fields of engineering. The first point to be treated is the composites materials, as also other important materials ... -
Medida sin contacto de la conductividad de líquidos
(Universitat Politècnica de Catalunya, 2016-10)
Projecte/Treball Final de Carrera
Accés obertCertain liquid products may contain free ions that induct conductivity in the material. Being able to measure it in a fast and non invasive method can be useful for a variety of industrial applications: process monitoring ... -
Mesura de perfils de velocitats en làmina lliure: ajust d'un perfilador UVP
(Universitat Politècnica de Catalunya, 2013-07-25)
Tesina
Accés obertEls avenços en la potència de càlcul dels ordinadors i els models numèrics en hidràulica fa que els fenòmens que són estudiats en laboratori siguin cada cop més complexos i, com a conseqüència, que l'instrumental que ... -
Microcantilever Displacement Measurement Using a Mechanically Modulated Optical Feedback Interferometer
(2016-06-29)
Article
Accés obertMicrocantilever motion detection is a useful tool for the characterization of the physical, chemical and biological properties of materials. In the past, different approaches have been proposed and tested to enhance the ... -
Observación itinerario encuadrado
(Departament d'Enginyeria del Terreny, Cartogràfica i Geofísica, 2010)
Audiovisual
Accés obertMuestra el procedimento a seguir para la observación de un itinerario abierto encuadrado. -
Optimization and launch of a WallScanner
(Universitat Politècnica de Catalunya, 2016-03)
Projecte/Treball Final de Carrera
Accés restringit per decisió de l'autor
Realitzat a/amb: Hilti CorporationThis report outlines the competition tests carried out by Hilti’s BU Measuring Systems, describes how these tests were carried out and the results we achieved from them in order to improve and upgrade our current ... -
Proyecto de desarrollo de un sistema escáner multipuerto orientado a las medidas de presiones múltiples en túneles aerodinámicos
(Universitat Politècnica de Catalunya, 2015-01-09)
Treball Final de Grau
Accés restringit per decisió de l'autorEl proyecto consiste en el estudio, diseño y construcción de un sistema multipuerto de bajo coste dedicado a la medida automática de presión en modelos aerodinámicos. El principal objetivo es suplir al laboratorio del túnel ... -
Proyecto I: Estudio del sistema de medición de diámetros de ejes vinculando disciplinas diversas
(2021)
Text en actes de congrés
Accés restringit per política de l'editorialEn el presente trabajo se expone la metodología empleada en la asignatura Proyecto I del Grado en Ingeniería en Tecnologías Industriales (GITI) impartido en la Escuela Técnica Superior de Ingeniería Industrial de Barcelona ... -
Sistema de adquisición y transmisión de datos para boya oceanográfica
(Universitat Politècnica de Catalunya, 2021-10-08)
Projecte Final de Màster Oficial
Accés obertEn este proyecto se diseña, programa y construye un sistema para la adquisición, registro y transmisión de datos de instrumentos presentes en una boya oceanográfica que pertenece al grupo de investigación SARTI (centro ... -
Stent optical inspection system calibration and performance
(Optical Society of American (OSA), 2017-03-20)
Article
Accés obertImplantable medical devices, such as stents, have to be inspected 100% so no defective ones are implanted into a human body. In this paper, a novel optical stent inspection system is presented. By the combination of a high ... -
Study of diagnosis method based on novelty detection and classification algorithms applied to an end of line tester
(Universitat Politècnica de Catalunya, 2016-09)
Projecte Final de Màster Oficial
Accés restringit per decisió de l'autorThis project includes the study and development of an end of line tester diagnosis system. The inputs are torque signals from the EOLT and the outputs are the current states of the machine. A raw data study is implemented ... -
Study of the effect of angle errors in conical ultrasonic sensors
(2013-09-01)
Article
Accés restringit per política de l'editorialMany ultrasonic sensors intended for non-destructive testing include a plastic or metal element, known as buffer rod, between the ultrasonic transducer and the material under analysis. Buffer rods are often terminated in ... -
The EMSO Generic Instrument Module (EGIM): standardized and interoperable instrumentation for ocean observation
(Frontiers Media, 2022-03-18)
Article
Accés obertThe oceans are a fundamental source for climate balance, sustainability of resources and life on Earth, therefore society has a strong and pressing interest in maintaining and, where possible, restoring the health of the ...