Exploració per tema "Materials a altes temperatures"
Ara es mostren els items 21-31 de 31
-
Hot deformation behaviour of sintered cobalt
(Elsevier, 2023-11-01)
Article
Accés obertHot deformation of sintered cobalt during hot compression testing was investigated in the temperature range of 700–1000 °C and at strain rates ranging from 0.0005 to 0.1 s-1. Cobalt underwent considerable dynamic ... -
Influence of environmental temperatures on the concrete compressive strength: simulation of hot and cold weather conditions
(Elsevier, 2005)
Article
Accés obertThis work has as objective to study the influence of mixing hour in the concrete properties such as workability and compressive strength in hot and cold weather conditions from an industrially applied point of view. The ... -
Influencia de diferentes parámetros en el comportamiento al fuego de siete especies de frondosas mejicanas
(Publicaciones EPSEB, 2017)
Text en actes de congrés
Accés obertEn este artículo se analiza el comportamiento al fuego de siete maderas frondosas mejicanas. La finalidad es intentar determinar cuáles son los parámetros que ejercen influencia en el comportamiento al fuego de la madera. ... -
Mechanical characterization of mullite environmental barrier coatings (EBCs)
(Universitat Politècnica de Catalunya, 2011-09)
Projecte Final de Màster Oficial
Accés restringit per decisió de l'autorCurrent gas turbines have reached their maximum operating temperature due to the limitations imposed by the turbine blades materials. In order to improve the gas turbine efficiency it is mandatory to be able to achieve ... -
Millora del comportament al foc de formigons mitjançant l'addició de fibres
(Universitat Politècnica de Catalunya, 2009)
Projecte/Treball Final de Carrera
Accés obertL’objectiu del present estudi es el de determinar si l’addició de fibres de polipropilè millora el comportament del formigó d’altes prestacions al foc. Entenent que un dels principals problemes del formigó d’alta resistència ... -
Mineral-based composition with deliquescent salt as flame retardant for melamine–urea–formaldehyde (MUF)-bonded wood composites
(2020-11-05)
Article
Accés obertA flame-retardant composition (FRC) composed of a surface-treated calcium carbonate-based mineral, having high porosity and loaded with deliquescent calcium chloride, was assessed for its potential as a flame retardant. ... -
Optimisation des paramètres d'un processus de forge à chaud d'un acier à haute résistance
(Société Marocaine des Sciences Mécaniques, 2009)
Text en actes de congrés
Accés obertLe comportement d’un acier à haute résistance lors d’un processus de forge à chaud a été étudié para des essais de compression uniaxiale à haute température sur une large gamme de vitesse de ... -
Textile for technical applications
(Universitat Politècnica de Catalunya, 2019)
Treball Final de Grau
Accés restringit per decisió de l'autor
Realitzat a/amb: Odisee Technologiecampus GentThe aim of this work is to get a better idea of the mechanical behaviour and fire properties of a composite. This composite consists out of a Portland cement matrix and an aramid nonwoven reinforcement. The aramid that is ... -
Textile for technical applications
(Universitat Politècnica de Catalunya, 2019-06)
Treball Final de Grau
Accés restringit per decisió de l'autor
Realitzat a/amb: Institut Universitaire de Technologie A de Lille -
Thermo-mechanical analysis of laminated composites shells exposed to fire
(Elsevier, 2022-02)
Article
Accés obertThis paper describes the research performed within the scope of H2020 project FIBRESHIP in the development and validation of a thermo-mechanical model to assess the fire performance of composite structures. A one-dimensional ... -
Valoración de la capacidad de cocción de crudos para la fabricación de clínker de cemento pórtland. Estudio experimental de quemabilidad
(Universitat Politècnica de Catalunya, 2013-06)
Projecte/Treball Final de Carrera
Accés restringit per decisió de l'autorComo es conocida, una de las partes más críticas de la fabricación de cemento es la producción de clínker. En esta etapa confluyen toda una serie de factores que condicionan tanto la calidad como el rendimiento, y por ...