Exploració per tema "Materials -- Propietats mecàniques"
Ara es mostren els items 21-40 de 140
-
Characterization of the degradation behaviour of Passive Fire Protector materials
(Universitat Politècnica de Catalunya / Università di Bologna, 2010)
Projecte/Treball Final de Carrera
Accés obertPassive Fire Protection (PFP) is used to protect industrial equipment against accidental fires, delaying the temperature rise and the loss of mechanical properties of the structural materials. If properly applied, this may ... -
Characterization of the surface modification of a Metastable Stainless Steel induced by Ground Polishing
(Universitat Politècnica de Catalunya, 2020-10-14)
Projecte Final de Màster Oficial
Accés obertMetastable austenitic stainless steels are distinguished by their susceptibility to the Transformation Induced Plasticity (TRIP) effect, where austenite (γ) to martensite (α’- and/or ε) transformation is triggered mechanically. ... -
Chemical, microstructural and micromechanical characterization by using the nanoindentation technique at the welding interphase of TiC, TaC and TiC/TaC single crystals
(Universitat Politècnica de Catalunya, 2021-07-07)
Treball Final de Grau
Accés restringit per decisió de l'autorAvui en dia, la necessitat de tenir eines millors i millorades, és un problema que anirà augmentant amb el temps, per això mateix ha començat una cerca d’un mètode per provar materials de molt altes prestacions, en aquesta ... -
Comparative study of the flexural properties of ABS, PLA and a PLA-wood composite manufactured through fused filament fabrication
(2020-10-28)
Article
Accés obertAbstract Purpose – The aim of this paper is to analyze the mechanical properties of acrylonitrile-butadiene-styrene (ABS) parts manufactured through fused filament fabrication and compare these results to analogous ones ... -
Composites from keratin biofibers. Study of compatibility using polyolephinic matrices
(2012)
Text en actes de congrés
Accés restringit per política de l'editorialThe study deals with the analysis and characterization of chicken feathers (CFs) based thermoplastic composites. The performance of the composite has been characterized in terms of mechanical properties which have been ... -
Configuración y montaje del banco experimental para la detección de puntos calientes térmicos en estructuras metálicas mediante el uso de ondas guiadas
(Universitat Politècnica de Catalunya, 2023-05-26)
Treball Final de Grau
Accés obertLos daños en estructuras han causado innumerables desastres en el transcurso de la historia, por lo cual han llamado la atención de la comunidad relacionada con las técnicas de construcción y mantenimiento de estructuras. ... -
Correlation between mechanical and wear properties of reinforced Hadfield steel
(Universitat Politècnica de Catalunya, 2022-10-31)
Projecte Final de Màster Oficial
Accés restringit per acord de confidencialitat -
Desarrollo y caracterización de nuevos recubrimientos poliméricos reforzados con fibras de vidrio para aplicaciones en la energía
(Universitat Politècnica de Catalunya, 2020-07-16)
Projecte Final de Màster Oficial
Accés restringit per acord de confidencialitatL’idea de realitzar aquest treball sorgeix de la necessitat de millorar l’adhesió entre fibres de vidre (GF, glass fiber) i la resina epoxi, al ser modificades superficialment i poder millorar les propietats tribològiques. ... -
Design and additive manufacturing of architected materials with non-linear mechanical response
(Universitat Politècnica de Catalunya / University of California, Irvine, 2013)
Treball Final de Grau
Accés restringit per decisió de l'autor
Realitzat a/amb: University of California, IrvineMost structural systems are designed to operate in their elastic regime, resulting in a linear relationship between applied loads and resulting displacements. This behavior is easy to analyze but not necessarily optimal ... -
Design and simulation of a mechanical female left arm low-elbow prothesis for CrossFit training
(OmniaScience, 2024-01)
Comunicació de congrés
Accés obertThe objective of this work was to design a mechanical prosthesis made of a polymer matrix composite material (epoxy resin) with laminated carbon fiber reinforcement (prepreg). The design was based on the patient’s current ... -
Design and study of SPD processes; HPT and MF
(Universitat Politècnica de Catalunya, 2018-01-26)
Projecte Final de Màster Oficial
Accés obertThis master thesis aims to model the severe plastic deformation through the HPT (High Pressure Torsion) and MDF (Multi Directional Forging) methods in order to determine the necessary external loads. These external loads, ... -
Desvulcanitzat d'EPDM mitjançant un procés combinat termomecanics i radiació amb microones
(Universitat Politècnica de Catalunya, 2021-06)
Treball Final de Grau
Accés obertDurant les últimes dècades l’ús de cautxús d’etilè propilè diè (EPDM) ha estat molt popular en aplicacions industrials i la seva reutilització és molt important per evitar una major contaminació. En aquest treball s’ha ... -
Desvulcanitzat d'EPDM mitjançant un procés combinat termomecanics i radiació amb microones
(Universitat Politècnica de Catalunya, 2021-06)
Treball Final de Grau
Accés obertEl reciclatge dels elastòmers ha esdevingut una peça més a tenir en compte davant el marc climàtic actual. Els cautxús d’etilè propilè diè (EPDM) són un material utilitzat àmpliament en el món industrial i el seu desvulcanitzat ... -
Detección de puntos calientes en estructuras utilizando ondas guiadas
(Universitat Politècnica de Catalunya, 2019-05-28)
Treball Final de Grau
Accés obertDetección de puntos calientes en estructuras utilizando ondas guiadas. -
Development of a database for the study of the S-N cycles
(Universitat Politècnica de Catalunya, 2022-07-04)
Treball Final de Grau
Accés restringit per acord de confidencialitat
Realitzat a/amb: Slovenská technická univerzita v BratislaveAquest article pretén descriure una de les propietats mecàniques dels materials sòlids anomenada elasticitat. A més, estudiar aquesta propietat utilitzant diferents mètodes com el mòdul de Young, la llei de Hooke i el mòdul ... -
Diseño de máquina para ensayo de fatiga de soldadura por puntos
(Universitat Politècnica de Catalunya, 2015-06-09)
Treball Final de Grau
Accés obertAvui en dia l’industria utilitza tots els coneixements que ha adquirit durant molts anys. Un dels aspectes a tenir més en compte és el dels materials i les seves propietats mecàniques. Per això es fan esforços importants ... -
Efecto de la variabilidad de las propiedades mecánicas de los materiales en la respuesta estructural de edificios de mampostería no reforzada
(Universitat Politècnica de Catalunya, 2018-06-28)
Treball Final de Grau
Accés obertEl distritode L’Eixample de Barcelona fue construido en su mayor parte entrelos años1860 y 1940. Por esta razón, la gran mayoría de estos edificios, normalmente levantados con mampostería no reforzada, ya han ... -
Effect of the filler on the nanomechanical properties of polypropylene in contact with paraffinic phase change material
(2015-02)
Article
Accés obertAs the changes on the mechanical properties with depth of indentation provide valuable information that may be suitable for design purposes, nanoindentation is an adequate technique for investigating the nanomechanical ... -
Effect of the viscosity ratio on the PLA/PA10.10 bioblends morphology and mechanical properties
(2018-01-30)
Article
Accés obertPLA bio-blends with a predominantly biosourced PA10.10 in the composition range 10-50wt.% were prepared by melt blending in order to overcome the advanced brittleness of PLA. Due to the inherent immiscibility of the blends, ... -
Effects of building condition on the tensile property of FFF Timberfill parts
(2018)
Text en actes de congrés
Accés restringit per política de l'editorialThis paper presents a study of mechanical properties of Fused Deposition Modeling (FDM) rapid prototyping processed material Timberfill. In this study, four important process parameters such as layer thickness, density, ...