Ara es mostren els items 21-40 de 323

    • Advances in the simulation of multi-fluid flows with the Particle Finite Element Method: application to bubble dynamics 

      Mier-Torrecilla, Mónica de; Idelsohn Barg, Sergio Rodolfo; Oñate Ibáñez de Navarra, Eugenio (2010)
      Report de recerca
      Accés obert
      In this work we extend the Particle Finite Element Method (PFEM) to multi-fluid flow problems with the aim of exploiting the fact that Lagrangian methods are specially well suited for tracking interfaces. We develop a ...
    • La aerodinámica del fórmula World Series y mejora de la eficiencia del ala delantera 

      Sanchez Folch, Nicolau (Universitat Politècnica de Catalunya, 2016-01)
      Treball Final de Grau
      Accés obert
      Este documento contiene el análisis de un perfil alar concreto del “flap” de un alerón delantero de un monoplaza de competición, World Series by Renault. Este es un perfil propio de Dallara, empresa que provee a dicha ...
    • Aerodynamic performance of a paraglider wing 

      Moreno Colilles, Joan Marc (Universitat Politècnica de Catalunya, 2017-10-30)
      Treball Final de Grau
      Accés obert
      The aim of this project is to carry out an aerodynamic performance analysis of a paraglider by using simulation computational programs with low time cost and computational requirements, but still effective approach obtaining ...
    • Air recovery assessment on high-pressure pneumatic systems 

      Trujillo, J. A.; Gámez Montero, Pedro Javier; Codina Macià, Esteban (2016-05-23)
      Article
      Accés obert
      A computational simulation and experimental work of the fluid flow through the pneumatic circuit used in a stretch blow moulding machine is presented in this paper. The computer code is built around a zero-dimensional ...
    • ALBA cooling system 1D model and thermo-fluid dynamic simulations using Flowmaster® software 

      Escaler Puigoriol, Francesc Xavier (2014-04-30)
      Report de recerca
      Accés restringit per acord de confidencialitat
      The Center for Industrial Diagnostics and Fluid Dynamics (CDIF) is a R&D center within the Technical University of Catalonia (UPC). It belongs to the TECNIO network, a technology transfer initiative from ACC10, the Technology ...
    • Alternating ‘flip’ solutions in ferrofluidic Taylor-Couette flow 

      Altmeyer, Sebastian Andreas (2018)
      Comunicació de congrés
      Accés obert
    • An edge-based solver for compressible flow 

      Ortega, Enrique; Flores Le Roux, Roberto Maurice; Oñate Ibáñez de Navarra, Eugenio (2005-10)
      Report de recerca
      Accés obert
      An edge-based high-resolution scheme for the solution of the compressible Euler equations on unstructured finite elements grids is presented. The flow solver adopted in the present work is the approximate Riemann solver ...
    • An empirical methodology for prediction of shape and flow rate of a free-falling non-submerged liquid and casting iron stream 

      Gámez Montero, Pedro Javier; Castilla López, Roberto; Freire Venegas, Francisco Javier; Khamashta Llorens, Maria; Codina Macià, Esteban (2016-09-19)
      Article
      Accés obert
      The work presented in this article demonstrates the use of an empirical and simplified approach based on an optical technique and a home-made ad hoc code that give knowledge of the shape and falling velocity of a free-falling ...
    • An implicit finite-element model for 3D non-hydrostatic mesoscale ocean flows 

      Maidana, Manuel Augusto; Blasco Lorente, Jorge; Espino Infantes, Manuel (2004)
      Article
      Accés obert
      We present in this paper a pressure stabilized, finite element method for the numerical approximation of three-dimensional, non-hydrostatic mesoscale ocean flows. The model considered here incorporates surface wind ...
    • An OpenFOAM set-up for simulating thermal winds in mountain/valley configurations 

      Athota, Rathan Babu; Rojas Gregorio, José Ignacio; Arias Calderón, Santiago; Villardi de Montlaur, Adeline de (2021)
      Text en actes de congrés
      Accés obert
    • An optofluidic router in a low-cost (PDMS) platform for rapid parallel sample analysis 

      Goyvaerts, Jeroen (Universitat Politècnica de Catalunya, 2016-09-09)
      Projecte Final de Màster Oficial
      Accés obert
      Optofluidic system for (bio)chemical applications are becoming more demanding in terms of num- ber of control points, number of light sources and readout equipment. So far, most of these sys- tems require several light ...
    • Analysis of heat transfer and fluid flow in thermal equipment 

      Zhang, Lei (Universitat Politècnica de Catalunya, 2019-10-09)
      Projecte Final de Màster Oficial
      Accés obert
      Heat transfer and flow fluid in thermal equipment is a concerned and basic topic in thermal area. The main objective of this thesis is tocultivate basic skills of analyzing athermal problemand selecting an appropriate ...
    • Anàlisi aerodinàmica d’una pilota de futbol 

      Palacios Corral, Alejandro (Universitat Politècnica de Catalunya, 2018-01-18)
      Treball Final de Grau
      Accés obert
      De quina manera es poden combinar ciència i esport per acabar donant un bon resultat? Hi ha algun tipus de fórmula matemàtica que doni amb la tecla adequada i permeti automatitzar la pràctica esportiva? De ben segur que, ...
    • Anàlisi de viabilitat de salts hidràulics reversibles tancats de capacitat mitjana i petita per emmagatzematge d'energia 

      Majoral Oller, Genís (Universitat Politècnica de Catalunya, 2020-06-26)
      Projecte Final de Màster Oficial
      Accés obert
      El context de Crisi Climàtica actual desafia la generació nacional d’energia a que canviï a fonts renovables. Aquestes, però, són de naturalesa intermitent i necessiten algun sistema d’emmagatzematge d’energia que acumuli ...
    • Anàlisi fluidodinàmic i modelització d'un drone de combustió interna 

      Pallàs Domingo, Xavier (Universitat Politècnica de Catalunya, 2015-04)
      Projecte/Treball Final de Carrera
      Accés restringit per decisió de l'autor
      L'objectiu d'aquest projecte és analitzar si és viable construir un drone amb motor d'explosi ó desde el punt de vista fluidomecànic, i fer el model matemàtic del drone, per poder fer el control d'aquest en un futur. El ...
    • Análisis de flujos turbulentos confinados en un canal usando métodos DNS 

      Barea Sánchez, Guillem (Universitat Politècnica de Catalunya, 2021-07-08)
      Treball Final de Grau
      Accés obert
      Amb el present treball final de grau s’ha pretès establir els fonaments de la turbulència i entendre com es forma aquest fenomen. Concretament, s’estudiarà el comportament dels fluxos turbulents confinats. Per això he fet ...
    • Análisis del flujo de aire a través de un difusor de automóvil 

      Saban Fosch, Alejandro (Universitat Politècnica de Catalunya, 2018-09-14)
      Treball Final de Grau
      Accés obert
      The aim of this study was to optimise a car diffuser in order to reduce fuel consumption and improve grip performance in bends, thus achieving a higher cornering speed. The optimisation has been carried out using the ...
    • Análisis numérico de las funciones corriente circulación y vorticidad, para flujo rotatorio con frontera rígida 

      Lizardi Ramos, A.; López C., R.; Morales G., J.R.; Terrés P., H.; Lara V., A. (Universitat Politècnica de Catalunya. CIMNE, 2010)
      Article
      Accés obert
      En este trabajo se obtienen y analizan los campos de las funciones vorticidad tangencial, circulación y corriente meridional, que se generan en el interior de un cilindro cerrado que tiene el fondo giratorio y la tapa ...
    • Apprasial of flow simulation by the Lattice Boltzmann Method 

      Izquierdo Bouldstridge, Guillermo (Universitat Politècnica de Catalunya / Imperial College London, 2017-02)
      Projecte Final de Màster Oficial
      Accés obert
      This research project presents an overview of the Lattice Boltzmann Method (LBM), an alternative numerical approach to conventional CFD. LBM has increased in popularity among the scientific community in recent years, due ...
    • Aproximación computacional al estudio de la inyectabilidad de cementos óseos y medidas ultrasónicas 

      Amin Gargouri, Mohamed (Universitat Politècnica de Catalunya, 2009-02)
      Projecte/Treball Final de Carrera
      Accés obert
      Este PFC presenta, en primer lugar, las bases para la formalización de simulaciones numéricas de procesos de inyección de materiales de tipo cemento como los que se utilizan en las técnicas de mínima invasión de ...