Now showing items 21-40 of 153

  • Claves excéntricas: fundamentos conceptuales para la enseñanza de proyectos arquitectónicos 

    Marina Barba, Jesús; Morón Serna, Elena (Universitat Politècnica de València / Universitat Politècnica de Catalunya. Iniciativa Digital Politècnica / Grup per a la Innovació i la Logística Docent en l'Arquitectura (GILDA), 2016-10)
    Conference report
    Open Access
    Thinking processes hold a spatial dimension that define the course they take. They follow a path that has different levels of complexity and linearity, their goal is to reach the horizon starting from a vertex the position ...
  • Close range remote control with advanced capabilities 

    Huiculescu, Magda; Carlino, Marco Ferdinando; Kobus, Michal; Pereira Gega, Miquel Àngel (Universitat Politècnica de Catalunya, 2016-06-16)
    Bachelor thesis
    Open Access
    When a marine underwater housing with electronic equipment is deployed it is usually switched off during transport to the deployment location, which can take days to weeks. The system is then switched on just before its ...
  • Components with higher and lower risk in a reliability system 

    Freixas Bosch, Josep; Pons Vallès, Montserrat (Fundación Mapfre, 2015)
    Conference report
    Open Access
    A new reliability importance measure for components in a system, that we call Representativeness measure, is introduced. It evaluates to which extent the performance of a component is representative of the erformance of ...
  • Concepción y diseño conceptual de un sistema de mezcla de material para la alimentación de una impresora 3D 

    Wang, Yuqing (Universitat Politècnica de Catalunya, 2015-09-14)
    Master thesis
    Restricted access - author's decision
    The project develops the design of a pump with a suitable mixer for 3D printers and the manufacture of functional prototype. This mechanism should allow impressions as being made so far but also enable a whole series of ...
  • Conception, Design and Materialisation of a pumping-based extrusion system for food 3D-printing 

    Vojtech, Lukas (Universitat Politècnica de Catalunya, 2015-06-29)
    Master thesis
    Open Access
    The aim of this master thesis is to provide the design of the system for the food printing that would eliminate the disadvantages of previous end effectors variants. Within the conceptual design and study of alternatives, ...
  • Constitutive model for fibre reinforced concrete based on the Barcelona test 

    Blanco Álvarez, Ana; Pujadas Álvarez, Pablo; Pialarissi Cavalaro, Sergio Henrique; Fuente Antequera, Albert de la; Aguado de Cea, Antonio (2014-10-01)
    Article
    Restricted access - publisher's policy
    Several constitutive models for fibre reinforced concrete (FRC) have been reported in the past years based on the flexural performance obtained in a bending test. The Barcelona test was presented as an alternative to ...
  • Construction project of a IH-635 overpass over the "white rock creek" in the city of Dallas (Texas) 

    Domínguez Mayans, Félix (Universitat Politècnica de Catalunya, 2015-02-24)
    Master thesis (pre-Bologna period)
    Open Access
    The objective of this project is reconstruction of the of a ramp bridge over the White Rock Creek due to the reconfiguration of IH-635 on LBJ Express Project. The aim of the ramp is to connect Park Central Street with ...
  • Containing timing-related certification cost in automotive systems deploying complex hardware 

    Kosmidis, Leonidas; Quiñones, Eduardo; Abella Ferrer, Jaume; Farrall, Glenn; Wartel, Franck; Cazorla Almeida, Francisco Javier (Association for Computing Machinery (ACM), 2014)
    Conference report
    Restricted access - publisher's policy
    Measurement-Based Probabilistic Timing Analysis (MBPTA) techniques simplify deriving tight and trustworthy WCET estimates for industrial-size programs running on complex processors. MBPTA poses some requirements on the ...
  • Contemporary earthen architecture in Mexico 

    Aguilar Prieto, Berenice (Centre de Política del Sòl i Valoracions - Universitat Politècnica de Catalunya, 2009-10-25)
    Article
    Open Access
    The purpose of this study is to put forward an appraisal of current remarkable works of earthen architecture in Mexico, where raw earth architecture, particularly in adobe, has been built since ancient times, but has ...
  • Creating crowd variation with the OCEAN personality model 

    Durupinar, Funda; Allbeck, Jan; Pelechano Gómez, Núria; Badler, Norman (2008)
    Conference report
    Restricted access - publisher's policy
    Most current crowd simulators animate homogeneous crowds, but include underlying parameters that can be tuned to create variations within the crowd. These parameters, however, are specific to the crowd models and may be ...
  • Una definición de espacialidad: la arquitectura de la interacción como modelo para el análisis del proceso de diseño arquitectónico 

    Quezada Roa, Pablo Antonio (Universitat Politècnica de Catalunya, 2011-06)
    Master thesis
    Open Access
    A partir del desarrollo tecnológico a fines del siglo XX se puede constatar un cambio en las herramientas de diseño arquitectónico: la inclusión de procedimientos asistidos por ordenador. En este sentido se busca esclarecer ...
  • Depuración con Humedales Construidos. Guía Práctica de Diseño, Construcción y Explotación de Sistemas de Humedales de Flujo Subsuperficial 

    García Serrano, Joan; Corzo Hernández, Angélica (2008-12-11)
    Book
    Open Access
    Este documento pretende cubrir un vacío en lengua española en el campo de los humedales, y en particular en su aplicación para tratar aguas residuales urbanas. Se trata de un texto eminentemente técnico. La redacción de ...
  • Design and software certification of three-phase motor control module 

    Vega Las Heras, Marco Antonio (Universitat Politècnica de Catalunya, 2015-06)
    Master thesis
    Restricted access - confidentiality agreement
  • Design as system : an approach to graphic and multimedia the design from the perspectives of chaos and general systems theories 

    Castaldo Suau, Blanca; Fernández Díez, Federico; Monguet Fierro, José María (2013-02-08)
    Article
    Restricted access - publisher's policy
    Viewing design through the prism of science could give an extraordinary twist to the modern theory of art and design. Establishing, for example, a parallel between the modern concept of design or art and physical systems ...
  • Design of a basic module for emergency situations: project of a fast deployable transitional shelter unit for emergency situations 

    Sieiro Torruella, Marc (Universitat Politècnica de Catalunya, 2015-07)
    Bachelor thesis
    Open Access
    This Bachelor thesis attempts to give a better solution to a increasing problem due to permanent people relocation. A unit prepared to give shelter and comfort with standard living characteristics will be designed in terms ...
  • Design of a hypersonic airbreathing cruise missile 

    Graells Pina, Eduard (Universitat Politècnica de Catalunya, 2019-09-02)
    Bachelor thesis
    Open Access
    In this project, a hypersonic airbreathing cruise missile is designed through an optimization process. The main use of this futuristic weapon technology is to be employed against enemy ships while being launched from an ...
  • Design of an injection mould 

    Pérez Garcia, Daniel (Universitat Politècnica de Catalunya, 2018-06)
    Bachelor thesis
    Open Access
  • Design of a prototype for the in situ forming of a liquid infused preform (ISFLIP) process 

    Juan Muñoz, Jaime; Salán Ballesteros, Maria Núria; Silva, Arlindo; Tornero, José Antonio (2020-01)
    Article
    Restricted access - publisher's policy
    The world is changing and demanding stronger, lighter and more versatile materials. Taking advantage of the full potential of these materials also requires versatile manufacturing processes. The in situ forming of a liquid ...
  • Design of FRC tunnel segments considering the ductility requirements of the Model Code 2010 

    Liao, Lin; Fuente Antequera, Albert de la; Pialarissi Cavalaro, Sergio Henrique; Aguado de Cea, Antonio (2015-03)
    Article
    Open Access
    Fibre reinforced concrete (FRC) is used to improve the mechanical response of precast segments for tunnels. The structural use of the material has been regulated by national codes and, recently, by the Model Code 2010 (MC ...
  • Design of micropiles for tunnel face reinforcement: undrained upper bound solution 

    Pinyol Puigmartí, Núria Mercè; Alonso Pérez de Agreda, Eduardo (2012-01)
    Article
    Restricted access - publisher's policy
    The stability of tunnel faces supported by an umbrella of subhorizontal micropiles is analyzed by means of the upper bound theorem of plasticity. The micropiles are considered beams subjected to the kinematic motion imposed ...