Exploració per tema "Deformacions i tensions"
Ara es mostren els items 21-33 de 33
-
Investigación de las deformaciones y tensiones en un problema estático de una biela con condiciones de contorno comunes
(Universitat Politècnica de Catalunya, 2006-12)
Projecte/Treball Final de Carrera
Accés obert -
Mechanical and metallurgical changes on 308L wires drawn by electropulses
(2015-11-17)
Article
Accés restringit per política de l'editorialThe electroplastic effects resulting from different electropulses configurations on a wire drawing process are investigated experimentally and numerically. Electropulses are induced into 308L stainless steel while it is ... -
Modeling of the hot deformation behavior of boron microalloyed steels under uniaxial hot-compression conditions
(2008)
Article
Accés restringit per política de l'editorial -
Nanoindentation with spherical tips of single crystals of YBCO textured by the Bridgman technique: Determination of indentation stress-strain curves
(2010-04)
Article
Accés restringit per política de l'editorialThe mechanical properties of superconductor ceramics are of interest in the manufacture of superconducting devices. The current trend is to produce smaller devices (using, e.g., thin films), and the correct characterization ... -
Obtención de curvas esfuerzo-deformación verdaderas del PP y copolímeros en bloque a velocidad de deformación constante aplicando correlación de imágenes digitales
(Universitat Politècnica de Catalunya, 2014)
Projecte Final de Màster Oficial
Accés obertEl presente trabajo tiene por objetivo investigar y comparar el comportamiento mecánico verdadero a tracción, macroscópico y en tiempo real, de un polipropileno homopolímero (PP060) y cuatro copolímeros bifásicos ... -
Parametric Study of Lateral-Torsional Buckling in Closed Cross-Sections
(Universitat Politècnica de Catalunya, 2013-05-19)
Treball Final de Grau
Accés obertEl objetivo de este trabajo es hacer un estudio paramétrico del pandeo lateral de perfiles cerrados en función de su esbeltez para determinar a partir de qué esbelteces podría aparecer el pandeo lateral. Para ello, se ... -
Set‐up of a split hopkinson pressure bar. Calibration and wave dispersion correction
(Universitat Politècnica de Catalunya, 2012)
Projecte/Treball Final de Carrera
Accés restringit per decisió de l'autorThe mechanical properties of materials change depending upon the strain rate that they are subject to. Robust models that capture the materials response at different strain rates are important. High strain rates from ... -
Soluciones técnicas en la construcción de revestimientos internos de puerta
(Universitat Politècnica de Catalunya, 2013-06)
Projecte/Treball Final de Carrera
Accés obertEs de todos conocido el avance realizado en estos últimos años en el campo de los materiales, más concretamente en la creación de nuevos materiales. En el ámbito de los metales se suelen realizar mezclas entre ellos en ... -
Stiffness Design of Paperboard Packages using the Finite Element Method
(Universitat Politècnica de Catalunya / Kungliga Tecniska Högskolan, 2011)
Projecte/Treball Final de Carrera
Accés obertThis thesis focuses on FEM analysis of paperboard global stiffness. Simulations in Abaqus and experiments were carried out where the deformation was measured. The experimental results were compared with simulation results ... -
Stress relaxation in screw fittings in cast AZ91D components
(Universitat Politècnica de Catalunya, 2013-09)
Projecte/Treball Final de Carrera
Accés obertThis work studies the behavior of screw fittings in high temperatures (120°C). The screw fittings are casted in AZ91D magnesium alloy (9% Al, 1% Zn). This part is jointed together with an aluminum part and the fastener is ... -
Tablas para el predimensionado con perfiles estructurales de acero según Eurocódigo 3
(Universitat Politècnica de Catalunya, 2014-06)
Treball Final de Grau
Accés obertEn este proyecto se calculan y se elaboran un conjunto de tablas de diferentes perfiles estructurales de acero, para los tres tipos de acero más comúnmente utilizados en las estructuras metálicas como son el S235, S275 ... -
The contact deformation regimes in brinell indentation and the finding of a general hardness equation
(Universitat Politècnica de Catalunya, 2007-10)
Projecte Final de Màster Oficial
Accés obertThis work concerns analysis of spherical indentation experiments through extensive finite element simulations involving the J2 flow and the J2 deformation plasticity theories both under finite and infinite deformations to ... -
The contact deformations in Brinelli identation and the finding of a general hardness equation
(Universitat Politècnica de Catalunya, 2007-10)
Projecte Final de Màster Oficial
Accés restringit per decisió de l'autorThe present thesis comprises the work performed by Mr. Daniel Esqué and Prof. Jorge Alcalá in the course of almost two years. The document has been written to serve as an Internal Report and preliminary draft for a ...