Exploració per autor "Anglada Gomila, Marcos Juan"
Ara es mostren els items 21-40 de 99
-
Effect of sandblasting and residual stress on strength of zirconia for restorative dentistry applications
(2014-01)
Article
Accés restringit per política de l'editorialSandblasting is a commonly used surface treatment technique for dental crowns to improve the adhesion of the mating parts of a restoration. The goal of this work is to study the effect of different sandblasting conditions ... -
Effect of thermal treatments on the wear behaviour of duplex stainless steels
(2009-11-04)
Article
Accés restringit per política de l'editorialDuplex stainless steel (DSS) is a family of steels characterized by two-phase microstructure with similar percentages of ferrite (α) and austenite (y).Their attractive combination of mechanical properties and corrosion ... -
Enhanced reliability of yttria-stabilized zirconia for dental applications
(2015-04-15)
Article
Accés obertAn increasing number of dental applications based on yttria-stabilized zirconia (3Y-TZP) have been developed in recent years as a result of the advances and versatility of dry-processing and soft machining at the pre-sintered ... -
Enhanced thermal stability and fracture toughness of TiAlN coatings by Cr, Nb and V-alloying
(Elsevier, 2018-05-25)
Article
Accés obertThe effect of metal alloying on mechanical properties including hardness and fracture toughness were investigated in three alloys, Ti~0.33Al0.50(Me)~0.17N (Me¿=¿Cr, Nb and V), and compared to Ti0.50Al0.50N, in the as-deposited ... -
Enhancement of mechanical properties of ceria-calcia stabilized zirconia by alumina reinforcement
(Elsevier, 2020-01-01)
Article
Accés obertZirconia ceramics stabilized using 10 mol% CeO2 and 1 mol% CaO were studied with the addition of small amounts of a-alumina. The elaboration process of five different compositions was done by wet mixing of powders using ... -
Estadística de la rotura de circona dopada con itria sometida a degradación hidrotérmica
(2010)
Text en actes de congrés
Accés obertEn este trabajo se ha estudiado la influencia de la degradación hidrotérmica en la resistencia a flexión de circona tetragonal estabilizada con 3% molar de itria. El material se ha evaluado tanto en estado original como ... -
Estimation of thickness of hydrothermal degraded layer in 3Y-TZP by x-ray diffraction
(2010)
Comunicació de congrés
Accés restringit per política de l'editorialA method is present for estimating the thickness of monoclinic layer formed by hydrothermal degradation of zirconia doped with 3 mol % of yttria (3Y-TZP) by means of X-ray diffraction at different incidence angles. The ... -
Estudio de la morfologia de grietas generadas por nanoindentación y su efecto en el cálculo de la tenacidad de fractura
(2011)
Text en actes de congrés
Accés obertEn el presente trabajo se ha utilizado la técnica de nanoindentación para inducir grietas en diferentes materiales cerámicos y estudiar la morfología de grieta generada por la aplicación de un indentador tipo Berkovich . ... -
Estudio por nanoindentación de 3Y-TZP envejecida por degradación hidrotérmica
(2010)
Text en actes de congrés
Accés obertLa circona tetragonal policristalina estabilizada con 3% molar de itria (3Y-TZP) puede transformarse espontáneamente a la fase monoclínica en presencia de vapor de agua a temperaturas relativamente bajas, lo cual conlleva ... -
Evaluación mecánica mediante técnicas de indentación de soldaduras por fricción lineal en aleaciones de titanio
(2005-11)
Article
Accés obertEste artículo presenta los resultados de un proyecto cuyo objetivo es evaluar la integridad estructural de soldaduras por fricción lineal entre diferentes aleaciones de titanio de aplicación aeronáutica. Concretamente se ... -
Evaluation of damage in front of starting notches induced by ultra-short pulsed laser ablation for the determination of fracture toughness in zirconia
(Elsevier, 2017-12-01)
Article
Accés obertMachining a very sharp notch on the surface of ceramics for fracture toughness testing has been a critical issue during many years. In this work, we explore a novel method capable of inducing sharp features with negligible ... -
Evaluation of fracture toughness of small volumes by means of cube-corner nanoindentation
(2012-03)
Article
Accés obertIn this work, the applicability of the two most commonly used equations for calculating the fracture toughness by nanoindentation is discussed in terms of the indenter geometry and the indentation crack morphology. These ... -
Femtosecond laser multi-patterning of zirconia for screening of cell-surface interactions
(Elsevier, 2018-03)
Article
Accés restringit per política de l'editorialYttria-stabilised tetragonal zirconia polycrystals (3Y-TZP) bioinert ceramics combine excellent strength and toughness, good aesthetics, high resistance to corrosion and absence of allergic reaction. However, improved ... -
Focused ion beam tomography of zirconia degraded under hydrothermal conditions
(Elsevier, 2012-08)
Article
Accés restringit per política de l'editorialThree-dimensional tomography was performed on hydrothermal degraded zirconia by sequential focussed ion beam (FIB) sectioning and field emission scanning electron microscopy (FE-SEM) observation. By means of image analysis ... -
Fractura por contacto en recubrimientos feldespáticos sobre circona dental
(2011)
Text en actes de congrés
Accés restringit per política de l'editorialLas restauraciones dentales de circona con recubrimientos feldespáticos se están empleando de manera creciente en aplicaciones dentales debido a su estabilidad química, buena respuesta mecánica y apariencia externa. Sin ... -
Fracture toughness of zirconia from a shallow notch produced by ultra-short pulsed laser ablation
(Elsevier, 2014-07-01)
Article
Accés restringit per política de l'editorialCeria partially stabilized zirconia ceramics (Ce-TZP) with identical grain size and different amounts of transformation toughening were processed to investigate the influence of phase transformation on static and cyclic ... -
Grietas pequeñas y resistencia a la rotura de materiales cerámicos tenaces
(2017)
Comunicació de congrés
Accés restringit per política de l'editorialLa tenacidad de fractura, KIc, de 3Y-ZrO2 con dos diferentes tamaños de grano (177 and 330 nm) y la de 12Ce-ZrO2 se han determinado por medio de un ensayo de flexión en cuatro puntos en probetas prismáticas con grietas ... -
High Cycle Fatigue of Metastable Austenitic Stainless Steels
(IOP PUBLISHING LTD., 2009-11-04)
Article
Accés restringit per política de l'editorialMetastable austenitic stainless steels are currently used in applications where severe forming operations are required, such as automotive bodies, due to its excellent ductility. They are also gaining interest for its ... -
High hardness, low Young's modulus and low friction of nanocrystalline ZrW2 Laves phase and Zr1-xWx thin films
(2012-04)
Article
Accés restringit per política de l'editorialZr1−xWx nanocrystalline films of Zr-W solid solutions and ZrW2 Laves phase were synthesized by magnetron co-sputtering. Large values of the H/E ratio up to 0.09 are observed for grain sizes in the nanometer range along ... -
High hardness, low youngs modulus and low friction of nanocrystalline ZrW 2 laves phase and Zr 1-xW x thin films
(2012)
Article
Accés restringit per política de l'editorialZr1−xWx nanocrystalline films of Zr-W solid solutions and ZrW2 Laves phase were synthesized by magnetron co-sputtering. Large values of the H/E ratio up to 0.09 are observed for grain sizes in the nanometer range along ...
