Exploració per autor "Sánchez Soto, Miguel"
Ara es mostren els items 21-40 de 125
-
DISSENY DE COMPONENTS DE PLÀSTICS (Examen 1r Quadr.)
Sánchez Soto, Miguel (Universitat Politècnica de Catalunya, 2004-11-02)
Examen
Accés restringit a la comunitat UPC -
DISSENY DE COMPONENTS DE PLÀSTICS (Examen 1r Quadr.)
Sánchez Soto, Miguel (Universitat Politècnica de Catalunya, 2005-11-04)
Examen
Accés restringit a la comunitat UPC -
EcoBlends’up: Compuestos microfibrilados “in situ” a partir de mezclas PLA/BioPA mediante manufactura aditiva
Martínez Orozco, Leandro Isidro; León Albiter, Noel; Cailloux, Jonathan; Sánchez Soto, Miguel; Maspoch Rulduà, M. Lluïsa; Santana Pérez, Orlando Onofre (Grupo Español de Fractura, 2021)
Text en actes de congrés
Accés obertEn ciertas mezclas de polímeros una morfología microfibrilar de la fase dispersa debidamente orientada durante la etapa de procesamiento, puede generar un efecto reforzante aumentando la tenacidad a la fractura, sobre todo ... -
EcoBlends’up: PLA/BioPA blends composites, microfibrillated “in situ” through additive manufacturing
Martínez Orozco, Leandro Isidro; León Albiter, Noel; Cailloux, Jonathan; Sánchez Soto, Miguel; Maspoch Rulduà, M. Lluïsa; Santana Pérez, Orlando Onofre (2022-04)
Article
Accés obertIn certain polymer blends, a properly oriented microfibrillar morphology of the dispersed phase during the processing stage can generate a reinforcing effect by increasing the fracture toughness, especially in the crack ... -
Efecto de las variables de proceso de inyección sobre la morfología de la espuma microcelular de PET-glicolizado
Sica, Kristy; Sánchez Soto, Miguel; Candal, María Virginia (2013)
Comunicació de congrés
Accés restringit per política de l'editorialLa presente publicación comprende el estudio del efecto de las variables de proceso de inyección sobre la morfología obtenida al espumar Polientilentereftalato glicolizado (PETG) con un agente espumante químico endotérmico. ... -
Efecto de las variables del proceso de inyección sobre la adhesión polímero-tela usando la técnica de decoración en molde
Dávila, Everling A.; Candal Pazos, Maria Virginia; Sánchez Soto, Miguel (2014-04-25)
Article
Accés restringit per política de l'editorialEl objetivo de esta investigación es estudiar el efecto de las variables del proceso de inyección sobre la adhesión entre un polímero y una tela utilizando la técnica de decoración en el molde. Se usaron fibras textiles y ... -
Efecto de las variables del proceso de inyección sobre la adhesión polímero-tela usando la técnica de decoración en molde
Dávila, Everling A.; Candal, María Virginia; Sánchez Soto, Miguel (2013)
Text en actes de congrés
Accés restringit per política de l'editorialEl objetivo de esta investigación es estudiar el efecto de las variables del proceso de inyección sobre la adhesión entre un material polimérico y una tela utilizando la técnica de decoración en el molde (IMD). Se usaron ... -
Effect of functionalization of texturized polypropylene surface by silanization and HBII-RGD attachment on response of primary abdominal and vaginal fibroblasts
Quiles Pérez, María Teresa; Rodríguez Contreras, Alejandra María; Guillem Martí, Jordi; Punset Fuste, Miquel; Sánchez Soto, Miguel; López Cano, Manuel; Sabadell García, Jordi; Velasco, Janice; Armengol Carrasco, Manuel; Manero Planella, José María; Arbós Via, Maria Antònia (Multidisciplinary Digital Publishing Institute (MDPI), 2024-03-01)
Article
Accés obert
Realitzat a/amb: Vall d'Hebron Institut de Recerca / Universitat Internacional de Catalunya / Centro de Investigación Biomédica en Red. Bioingeniería, Biomateriales y Nanomedicina / Universitat Autònoma de Barcelona / Hospital Sant Rafael - Germanes Hospitalàries / Hospital Universitari Vall d'HebronSoft tissue defects, such as incisional hernia or pelvic organ prolapse, are prevalent pathologies characterized by a tissue microenvironment rich in fragile and dysfunctional fibroblasts. Precision medicine could improve ... -
Effect of microcellular foaming on the fracture behavior of ABS polymer
Gómez Monterde, Javier; Schulte, M.; Ilijevic, Stefan; Hain, J; Sánchez Soto, Miguel; Santana Pérez, Orlando Onofre; Maspoch Rulduà, M. Lluïsa (2016)
Article
Accés obertIn this work, the properties of microcellular ABS were studied. Foamed samples exhibited a solid skin/foamed core struc- ture, with some elongated cells in the flow direction, while spherical cells were mostly observed in ... -
Effect of superelastic shape memory alloy wires on the impact behaviour of carbon fiber reinforced in situ polymerized poly(butylene terephthalate) composites
Aurrekoetxea Narbarte, Jon; Zurbitu, J.; Ortiz de Mendibil, I.; Aguirregomezkorta, A.; Sánchez Soto, Miguel; Sarrionandia, Mariasun (2011-03-15)
Article
Accés restringit per política de l'editorialLow-velocity impact properties of shape memory alloy (SMA) wires and carbon fi ber reinforced poly (butylene terephthalate) obtained by resin transfer molding were characterized. At the subcritical regime the dissipated ... -
Effect of the viscosity ratio on the PLA/PA10.10 bioblends morphology and mechanical properties
Cailloux, Jonathan; Abt, Tobias Martin; García Masabet, Violeta del Valle; Santana Pérez, Orlando Onofre; Sánchez Soto, Miguel; Carrasco Alonso, Félix Ángel; Maspoch Rulduà, M. Lluïsa (2018-01-30)
Article
Accés obertPLA bio-blends with a predominantly biosourced PA10.10 in the composition range 10-50wt.% were prepared by melt blending in order to overcome the advanced brittleness of PLA. Due to the inherent immiscibility of the blends, ... -
Effects of POSS nanoparticles on ABS-g-Ma thermo oxidation resistance
Vilà Ramirez, N.; Sánchez Soto, Miguel (2012-10)
Article
Accés restringit per política de l'editorialThermo oxidative degradation at and beyond process- ing temperatures has been carried out on ABS copoly- mer grafted with Maleic Anhydride (ABS- g -Ma) and three nanocomposites with the above material melt-blended ... -
Enhancement of POM thermooxidation resistance through POSS nanoparticles
Vilà Ramirez, N.; Sánchez Soto, Miguel; Illescas Fernandez, Silvia (2011-10)
Article
Accés restringit per política de l'editorialThermooxidative degradation at and beyond processing temperatures has been carried out on polyoxymethylene (POM) enhanced with four different types of POSS, being Glycidyl, GlycidylIsobutyl, Aminopropylisobutyl, and ... -
Essential work of fracture, crack tip opening displacement, and J-integral relationship for a ductile polymer film
Martínez Benasat, Antonio; León Albiter, Noel; Arencón Osuna, David; Sánchez Soto, Miguel (2016-10)
Article
Accés obertA unique set of double-edge notched tension specimens of a Polyethylene Terephthalate Glycol-modi¿ed ¿lm was tested in mode I, plane stress. The load was registered on a universal testing machine. The displacements, ligament ... -
Estudio de la adhesión en uniones de polímeros obtenida mediante sobreinyección para aplicaciones biomédicas
Dávila, Everling A.; Candal Pazos, Maria Virginia; Sánchez Soto, Miguel (2010)
Text en actes de congrés
Accés restringit per política de l'editorialEl objetivo de esta investigación radica en el estudio de la adhesión entre materiales poliméricos rígidos mediante la técnica de la sobreinyección. Específicamente, se estudió el efecto de las variables del proceso de ... -
Estudio de la adhesión en uniones poliméricas sobreinyectadas rígido-rígido (ABS/SAN)
Dávila, Everling A.; Candal Pazos, Maria Virginia; Sánchez Soto, Miguel (2013-11)
Article
Accés obertEl objetivo de esta investigación fue estudiar el efecto de las variables del proceso de sobre inyección sobre la resistencia de la unión adhesiva rígido–rígido entre un par de materiales poliméricos. Se emplearon como ... -
Estudio de la estabilidad térmica en nanocompuestos POM/POSS
Illescas Fernandez, Silvia; Arostegui, Asier; Sánchez Soto, Miguel; Arencón Osuna, David; Gamez Pérez, José; Franco Urquiza, Edgar Adrian (Universidad de Zaragoza, 2010)
Text en actes de congrés
Accés restringit per política de l'editorialDebido a sus excelentes propiedades termo-mecánicas el polióxido de metileno (POM) es un polímero de gran interés industrial. Sin embargo, uno de sus mayores inconvenientes es su tendencia a la termooxidación que ocasiona ... -
Estudio de la presión interna en el molde de inyección en la producción de materiales poliméricos microcelulares de etileno-propileno con espumación física
Gómez Gómez, Jaime Francisco; Sánchez Soto, Miguel; Arencón Osuna, David; Rosa Sierra, Luis Alberto (2014)
Text en actes de congrés
Accés obertSe efectuó el estudio de la presión en la cavidad de un molde de inyección en dos posiciones diferentes respecto al punto de inyección para evaluar los efectos de los parámetros del proceso y la distancia de dicho punto ... -
Evaluation of the mechanical properties of Poly(Lactic) Acid/ABS Bio-Blend foams
Sánchez Soto, Miguel; Kamrani Moghadam, Mohammad Reza; Maspoch Rulduà, M. Lluïsa; Santana Pérez, Orlando Onofre; Cailloux, Jonathan (Springer, 2020-05-30)
Capítol de llibre
Accés restringit per política de l'editorialFoaming is a powerful method that allows lightening of products and reducing the amount of material used. Poly(lactic) acid (PLA) is considered a promising thermoplastic for the replacement of traditional non-biodegradable ... -
Extruded-calendered sheets of fully recycled pp/opaque pet blends: Mechanical and fracture behaviour
Loaeza Becerril, Alfonso David; Cailloux, Jonathan; Santana Pérez, Orlando Onofre; Sánchez Soto, Miguel; Maspoch Rulduà, M. Lluïsa (Multidisciplinary Digital Publishing Institute (MDPI), 2021-07-02)
Article
Accés obertThis work presents the experimental results of the mechanical and fracture behaviour of three polymeric blends prepared from two recycled plastics, namely polypropylene and opaque poly (ethylene terephthalate), where the ...