Exploració per tema "Satèl·lits artificials -- Aparells i instruments"
Ara es mostren els items 1-20 de 21
-
A multi-agent adaptive protocol for femto-satellite applications
(Universitat Politècnica de Catalunya, 2011-07-15)
Treball Final de Grau
Accés obertFemto-satellites are a very promising category of satellites that weigh less than 100 grams. Also, a Pico-Rover it is a self-contained robot that weighs less than 1 kilogram and its motion works by rolling the external ... -
Aiding a SLAM system with an IMU sensor
(Universitat Politècnica de Catalunya, 2019-03-29)
Treball Final de Grau
Accés restringit per decisió de l'autor
Realitzat a/amb: Università degli studi di Roma "La Sapienza"This project consists of aid an existing SLAM system by developing and implementing a motion estimator based on the Inertial measurements of a VI-sensor in the SLAM pipeline. This entire project has been carried out at ... -
Comparativa de sensores espaciales de diferente resolución espectral en la exploración minera
(Universitat Politècnica de Catalunya, 2016-07)
Projecte Final de Màster Oficial
Accés obertEl reconocimiento de minerales en la superficie terrestre se lleva a cabo desde hace años con imágenes captadas desde satélites artificiales (LANDSAT, SPOT, EO-1, TERRA, etc.). La resolución espectral de los sensores a ... -
Design and implementation of a single On-Board Computer for CubeSats
(Universitat Politècnica de Catalunya, 2019-09)
Projecte Final de Màster Oficial
Accés oberthis document reports the process of design, implementation, and testing of an On-Board Computer for CubeSats in a single 1U-sized CubeSat PCB. The aim is to design a modular, cheap, e cient and exible product than could ... -
Design of a low-latency transoceanic shortwave radio link for high frequency trading applications
(Universitat Politècnica de Catalunya, 2019-10-30)
Treball Final de Grau
Accés obertThe main objective of this final Bachelor’s degree project is to design and study the relia-bility of a transoceanic shortwave radio link that connects London and New York. Two ofthe most important stock exchanges of the ... -
Disseny i implementació d'una PCU (Power Control Unit) per als Receiver Amplifier Subsystem del satèl·lit Biomass de la ESA
(Universitat Politècnica de Catalunya, 2019-02-06)
Treball Final de Grau
Accés restringit per decisió de l'autorAquest treball presenta el procediment del disseny de la Power and Control Unit (PCU) dels Receiver Amplifier Subsystem(RAS) del satèl·lit Biomass, contenint el procés de disseny, simulacions i ... -
Efectes de la radiació sobre els components electrònics d'un satèl·lit en òrbita al voltant de la Terra
(Universitat Politècnica de Catalunya, 2011-06-03)
Treball Final de Grau
Accés obertAquest treball analitza els efectes de la radiacio a l'espai sobre components electronics. En particular, considerem els efectes de la radiacio sobre el Wikisat, un femto-satel?lit desenvolupat a l'EETAC que es llancara ... -
Fabricación de un sensor solar en dos ejes para el satélite IntaMicroSat
(Universitat Politècnica de Catalunya, 2011-07-15)
Projecte/Treball Final de Carrera
Accés obertEnglish: he goal of this project is the fabrication of a two axis sun sensor for the attitude control of the IntaMicroSat satellite. This sensor should detect the position of the sun with high accuracy (±1 º) and at an ... -
Implementation of a long range radio-link system for femto-satellites in very Low Earth Orbit
(Universitat Politècnica de Catalunya, 2013-11-05)
Treball Final de Grau
Accés obertThis Final Bachelor Work (TFC) is based on real implementations of long range radio-link systems (having at least 9,600 bps) for femtosatellites (mass lower than 100 grams) in very Low Earth Orbit in 250 km and few weeks ... -
Indoor and outdoor rover with Simultaneous Localization And Mapping (SLAM)
(Universitat Politècnica de Catalunya, 2011-12-01)
Projecte Final de Màster Oficial
Accés obertThis work describes the design, development and implementation of a SLAM (Simultaneous Localization And Mapping) consists of two subsystems: low-cost autonomous robot and a ground station where telemetry data and information ... -
Mechanical design, implementation and testing of a helix antenna deployment system for a 1U CubeSat
(Universitat Politècnica de Catalunya, 2019-07-19)
Projecte Final de Màster Oficial
Accés restringit per decisió de l'autorCubeSats are the tech trend in the space sector. They allow to send experiments to orbit the Earth using reduced dimensions. This is the case of the 3Cat-4, a mission developed in the Nano-Satellite and Payload Laboratory ... -
OUFTI-NEXT : study of refractive lenses for an infrared camera
(Universitat Politècnica de Catalunya, 2019-05-22)
Projecte Final de Màster Oficial
Accés obert
Realitzat a/amb: Université de Liège / Centre Spatial de LiègeThe aim of this master thesis is to survey the capability of a refractive design to accommodate the requirements of the OUFTI-NEXT payload. The optical design for thermal infrared camera is challenging:• the lack of glass ... -
Proyecto de diseño y construcción de la estructura de un rotor de antena con movilidad autónoma con impresora 3D para la Terrassa Groun Station (TGS)
(Universitat Politècnica de Catalunya, 2016-06)
Treball Final de Grau
Accés restringit per decisió de l'autorEn estos últimos años la impresión 3D se está consolidando como una buena manera de fabricar piezas de manera rápida, sencilla y eficaz. Sus usos pueden ser muy variados, hoy en día esta tecnología es utilizada en diversos ... -
Radiation environment over the WFM detector in LOFT's ESA space mission
(Universitat Politècnica de Catalunya, 2013-05-20)
Projecte Final de Màster Oficial
Accés obert[ANGLÈS] The analysis of the radiation environment to which a space mission is exposed is of great importance given the negative effects that radiation could cause in different scientific instruments. In this work we carried ... -
Simulació i caracterització d'un simulador solar
(Universitat Politècnica de Catalunya, 2012-07-09)
Treball Final de Grau
Accés obertThe objective pursued with this Final Bachelor thesis is to support the activity of Remote Sensing research group of the UPC, which are developing the Cubesat UPCSat-1, a picosatellite with 10x10x10cm dimension (1U). This ... -
Study and design of a Business Model for a micro-launcher company operating in Very Low Earth Orbit (VLEO) missions
(Universitat Politècnica de Catalunya, 2019-01-10)
Treball Final de Grau
Accés restringit per decisió de l'autorThis thesis is about thedesign of a businessmodelfor a micro-launchercompany operating in Very Low Earth Orbit (VLEO) missionsafter apreliminarybut extensive study ofthe industry:the current political,social, technological ... -
Study and design of the Business Model CANVAS for an aircraft assisted microlauncher company in VLEO missions
(Universitat Politècnica de Catalunya, 2018-09-10)
Treball Final de Grau
Accés restringit per decisió de l'autorThe aim of this proposal is to establish the business model CANVAS for a new company operating in the VLEO market to launch drone assisted micro-satelites for Earth Observation missions. -
Study and Validation of a 5.8 GHz Video-Link for a Lunar Pico-Rover
(Universitat Politècnica de Catalunya, 2013-02-15)
Treball Final de Grau
Accés obertThis work is a study of a basic video-link for a future Lunar Explorer Rover. The rover is a ball-like robot that is involved in the Google Lunar X-Prize s a part of Team FREDNET. The use of the 5.8 GHz band allows a large ... -
Study, design and testing of an helix antenna deployment system for a 1U CubeSat
(Universitat Politècnica de Catalunya, 2018-06)
Treball Final de Grau
Accés restringit per decisió de l'autor -
Tools for validation of the Lightning Imager sensor on the 3rd generation of the METEOSAT weather satellite
(Universitat Politècnica de Catalunya, 2020-11-27)
Projecte Final de Màster Oficial
Accés obertThe 3rd generation of the METEOSAT (MTG) will be equipped with a lightning imager sensor (LI) to detect and locate lightning flashes. The field-of-view of the LI-MTG will cover Europe and Africa. Since the LI-MTG will ...