Exploració per títol
Ara es mostren els items 59038-59057 de 245872
-
Design of seismic acquisition system for volcanology
(SARTI, 2013)
Article
Accés obert -
Design of seismic acquisition system for volcanology
(2013)
Text en actes de congrés
Accés obertThis paper presents a new design based on acquisition system of the volcanic seismic data. Mainly, this system is composed of a microcontroller to manage the peripherals, a module to acquire the information of seismic ... -
Design of sensorized feet for a kid-seized biped robot
(Universitat Politècnica de Catalunya / Politecnico di Torino, 2010)
Projecte/Treball Final de Carrera
Accés restringit per decisió de l'autorThis paper describes the development of a custom load cell used as a foot for a humanoid robot or humanoid exoskeleton. In order to develop a dynamically compensated walk the precise measurement of the zero moment point ... -
Design of shifting output-feedback controllers for LPV systems subject to time-varying saturations
(2022)
Text en actes de congrés
Accés obertThis paper considers the problem of designing a shifting output-feedback controller for polytopic linear parameter-varying (LPV) systems subject to time-varying saturations. By means of the LPV framework and the use of the ... -
Design of shifting state-feedback controllers for constrained feedback linearized systems: application to quadrotor attitude control
(2024-03-10)
Article
Accés obertThis paper proposes a shifting feedback linearization controller for nonlinear systems under input saturation. The suggested approach for determining a linear parameter-varying (LPV) state-feedback controller is based on ... -
Design of shifting state-feedback controllers for LPV systems subject to time-varying saturations via parameter-dependent Lyapunov functions
(2022-07)
Article
Accés obertThis paper considers the problem of designing a shifting state-feedback controller via quadratic parameter-dependent Lyapunov functions (QPDLFs) for systems subject to symmetric time-varying saturations. By means of the ... -
Design of ship-engine-propeller simultaneous matching and development of a propeller and engine selecting system
(CIMNE, 2015)
Text en actes de congrés
Accés obertA process to design ship-engine-propeller simultaneous matching is proposed in this paper. The design process treats the whole system as an assembly of the ship-propeller subsystem and the engine-propeller ... -
Design of single precision float adder (32-bit numbers) according to IEEE 754 standard using VHDL
(Universitat Politècnica de Catalunya / Slovenská Technická Univerzita v Bratislave, 2012-04-25)
Projecte Final de Màster Oficial
Accés obert
Realitzat a/amb: Slovenská technická univerzita v Bratislave[ANGLÈS] Floating Point arithmetic is by far the most used way of approximating real number arithmetic for performing numerical calculations on modern computers. Each computer had a different arithmetic for long time: ... -
Design of single shaped reflector antennas for synthesis of shaped contour beams using genetic algorithms
(2000-12)
Article
Accés restringit per política de l'editorialA genetic algorithm (GA) has been developed for designing single-shaped reflector antennas for the synthesis of shaped contour beams. The graphical processing technique is used in order to obtain the antenna radiation ... -
Design of single shaped reflector antennas for synthesis of shaped contour beams using genetic algorithms
(JOHN WILEY & SONS INC, 2000-12-31)
Article
Accés obertA genetic algorithm (GA) has been developed for designing single-shaped reflector antennas for the synthesis of shaped contour beams. The graphical processing technique is used in order to obtain the antenna radiation ... -
Design of single shaped reflector antennas with a single feed applying genetic algorithms and graphical processing techniques
(SEE, 1998)
Text en actes de congrés
Accés obertA genetic algorithm GA has been de ( ) eloped for designing single-shaped reflector antennas for the synthesis of shaped contour beams. The graphical processing technique is used in order to obtain the antenna radiation ... -
Design of small interfaces
(Universitat Politècnica de Catalunya, 2013-06)
Treball Final de Grau
Accés restringit per decisió de l'autorMany modern devices with different kinds of characteristics have been invading the market in recent years and nowadays the market place is flooded with them.Users are experiencing a storm of new technology and a massive ... -
Design of stainless steel continuous beams with tubular cross-sections
(2017-11)
Article
Accés obertThis paper presents a comprehensive study on the application of global plastic design methods, not currently allowed in European specification provisions, to stainless steel rectangular and square hollow section continuous ... -
Design of stand-alone electrification systems using fuzzy mathematical programming approaches
(2021-08)
Article
Accés obertCurrently, around 1.1 billion people lack access to electricity, mainly in developing countries. Solar photovoltaic systems can provide electricity, but the design is complex, having to size and site the equipment. Besides, ... -
Design of state-feedback controllers for linear parameter varying systems subject to time-varying input saturation
(Multidisciplinary Digital Publishing Institute, 2019-09-01)
Article
Accés obertAll real-world systems are affected by the saturation phenomenon due to inherent physical limitations of actuators. These limitations should be taken into account in the controller’s design to prevent a possibly severe ... -
Design of static intercell interference coordination schemes for realistic lte-based cellular networks
(Universitat Politècnica de Catalunya, 2014-01-29)
Tesi
Accés obertToday, 3.5 and 4G systems including Long Term Evolution (LTE) and LTE-Advanced (LTE-A) support packet-based services and provide mobile broadband access for bandwidth-hungry applications. In this context of fast evolution, ... -
Design of Steel Fibre Reinforced Concrete Structures according to the Annex L of the Eurocode-2 2023
(Elsevier, 2023-06)
Article
Accés obertThe Annex L of FprEN 1992-1-1:2023 (EC-2) provides provisions for the design of Steel Fibre Reinforced Concrete (SFRC) structures. This Annex is supported by a comprehensive background document (BD) that gathers the main ... -
Design of steel plated structures with finite elements
(Ernst & Sohn, 2023)
Llibre
Accés restringit per política de l'editorialDue to the relatively large slenderness of plated structures, the proof of adequate buckling resistance is crucial for dimensioning. Plate buckling is a stability problem of a compression-loaded plate and is generally ... -
Design of Subsidized OSH’s Housing Estates in Post-War Spain. The case of Zaragoza (1954-1964)
(Centre de Politica de Sol i Valoracions, CPSV / Universitat Politècnica de Catalunya, UPC, 2022-02-28)
Article
Accés obertAquest treball presenta l’anàlisi del disseny dels habitatges de deu blocs d’habitatges construïts per l’Obra Sindical de la Llar (OSH) a la ciutat de Saragossa entre 1954 i 1964. Totes van ser dissenyades pels arquitectes ... -
Design of suspension points for a Formula Student electric vehicle
(Universitat Politècnica de Catalunya, 2022-07-14)
Treball Final de Grau
Accés restringit per acord de confidencialitat