Browsing by Author "Solé Lloveras, Jordi"
Now showing items 1-10 of 10
-
3D printed probe for simultaneous E and H fields measurements
(Institute of Electrical and Electronics Engineers (IEEE), 2022)
Conference report
Open AccessAdditive manufacturing using conductive polylactic acid (PLA) is an emerging technology. This work presents a double-loaded loop probe made of conductive PLA and evaluates its performance compared to a previous design built ... -
Desenvolupament d'un sistema de control per assaigs de Compatibilitat Electromagnètica: Immunitat radiada i conduïda
(Universitat Politècnica de Catalunya, 2020-05)
Bachelor thesis
Open AccessEach electronic device with commercial purposes within the European Union shall declare the EMC normative compliance. One the requirements consists on assuring that the device continues operating as intended when electromagnetic ... -
Design and validation of a test fixture for studying RF current flux through mechanical aircraft joints
(Institute of Electrical and Electronics Engineers (IEEE), 2022)
Conference lecture
Open AccessThe study of electric currents flowing through the airframe is important from an EMC standpoint due to the potential to cause severe aircraft failures. Nevertheless, this is a challenging task because of the complex shape, ... -
Design and validation of current probes for studying RF current flux through mechanical aircraft joints
(Universitat Politècnica de Catalunya, 2022-06-29)
Master thesis
Open AccessThe study of electrical currents flowing through the airframe is very important from an EMC (Electromagnetic Compatibility) standpoint due to the potential to produce severe aircraft faults. As an example, direct lightning ... -
Efficient in situ assessment of radiated emissions using time-domain measurements
(Institute of Electrical and Electronics Engineers (IEEE), 2023)
Conference report
Open AccessThis paper presents three different case studies where the electromagnetic emissions of atypical equipment (a photovoltaic system, a passenger boarding bridge and a pallet washing machine) have been assessed in situ using ... -
Evaluation of spectral estimation parameters for direct sampling FFT-based measuring receivers
(Institute of Electrical and Electronics Engineers (IEEE), 2024-04-16)
Article
Open AccessThe standard CISPR 16-1-1 defines the measuring receiver using a black-box approach and sets requirements for its accuracy and spectral properties. Traditionally, such test receivers were developed using a superheterodyne ... -
Measuring receiver benchmark for conducted and radiated emissions testing in space applications
(Institute of Electrical and Electronics Engineers (IEEE), 2023)
Conference report
Open AccessThis paper compares the measurement results obtained from three different implementations of measuring receivers regarding spectral level accuracy. The objective is to validate the suitability of direct sampling electromagnetic ... -
Rogowski coil sensors for measuring lightning strike currents on mechanical aircraft joints
(2023-01-10)
Article
Open AccessThe study of currents flowing through the fuselage of an airplane is of vital importance from the standpoint of electromagnetic compatibility due to their potential for causing severe failures on embedded systems. Direct ... -
Strategies using time-domain measurements for radiated emissions testing in harsh environments
(2023-08-10)
Article
Open AccessPerforming in-situ radiated emissions measurements, that is, in locations different from a standard test site, can be a challenging task because of the high electromagnetic noise levels in the ambient. A harsh electromagnetic ... -
Time domain leveling for EMC conducted radiofrequency immunity tests
(Íñigo Cuiñas Gómez, 2021)
Conference report
Open AccessTesting the immunity to conducted radiofrequency disturbances, induced by radio-frequency fields, is fundamental within the electromagnetic compatibility assessment of devices having input and/or output cables. This procedure ...
