Browsing by Contributor "Bermejo Broto, Sandra"
Now showing items 1-20 of 36
-
2D Liquid Lens Based on EWOD
(Universitat Politècnica de Catalunya, 2012-09-10)
Master thesis
Open Access[ANGLÈS] This thesis presents the fabrication, development and characteristics of a liquid lens based on electrowetting. Essentially, when the lens is in liquid form, both its position and its curvature can be reversibly ... -
Building metamaterials
(Universitat Politècnica de Catalunya, 2019-10)
Master thesis
Restricted access - confidentiality agreementThis thesis shows the work done to design, fabricate and characterise the formation of nanostructures built with polystyrene nanospheres (295 nm, 522 nm and 836 nm diameter size) in an attempt to develop all dielectric ... -
Caracterización de interruptores MEMS mediante fuentes de corriente
(Universitat Politècnica de Catalunya, 2008-10-01)
Master thesis (pre-Bologna period)
Restricted access - author's decisionEl presente proyecto caracteriza mediante fuentes de corriente interruptores microelectromecánicos (MEMS) con el objetivo de estudiar los fenómenos de carga que se producen sobre el material dieléctrico presente en estos ... -
Caracterización de minipaneles fotovoltaicos con iluminación monocromática
(Universitat Politècnica de Catalunya, 2008-05-07)
Master thesis (pre-Bologna period)
Open AccessEn este trabajo se aborda el estudio y caracterización de células y paneles solares. El objetivo es conocer la respuesta de estos elementos fotovoltaicos al ser iluminados con luz monocromática, cuantificando los cambios ... -
Caracterización de minipaneles fotovoltaicos para aplicaciones inalámbricas
(Universitat Politècnica de Catalunya, 2010)
Master thesis (pre-Bologna period)
Open AccessEl estudio realizado en este proyecto final de carrera pretende caracterizar unos paneles fotovoltaicos de reducidas dimensiones (<1cm2) y peso (<100mg), diseñados y fabricados por el grupo de investigación de Micro y ... -
Characterization of nanoparticles deposition with electrospray
(Universitat Politècnica de Catalunya, 2010-09)
Master thesis
Open AccessNowadays the nanotechnology is pushing hard in almost every direction of the technology. Creating patterns with nanoparticles would be a very useful technique in order to manipulated nanoparticles. Here comes the ... -
Contribution to liquid lens technology
(Universitat Politècnica de Catalunya, 2016-07-20)
Doctoral thesis
Open AccessThe interest on microfluidic systems based on electrowetting-on-dielectric (EWOD) and the miniaturization of such integrated devices, has increased significantly mainly due to the advent of mass market applications such ... -
Depósito y caracterización de capas de Teflón sobre Silicio para la realización de dispositivos EWOD
(Universitat Politècnica de Catalunya, 2011-06-14)
Master thesis (pre-Bologna period)
Open AccessCatalà: Estudi de diferents mètodes de dipòsit de tefló i el seu efecte sobre la funcionabilitat final d'un sistema basat en la tecnologia EWOD -
Desenvolupament d'un sensor ceràmic intel·ligent per a la detecció i eliminació de microplàstics.
(Universitat Politècnica de Catalunya, 2022-10-26)
Bachelor thesis
Restricted access - confidentiality agreementThe current socio-environmental and health problems that have arisen from the research of the presence of microplastics in the human body expose the need not only to reduce the use of plastics but to eliminate those that ... -
Design and implementation of a modular wireless charging platform using magnetic resonance and beamforming?
(Universitat Politècnica de Catalunya, 2019-01-31)
Master thesis
Open AccessMagnetic Resonance (MR) Wireless Power Transfer (WPT) is a specific case for thewell known inductive coupling principle where energy is transmitted from a transmittingcoil to a receiving one without the need of any wires. ... -
Development of a novel interdigitated capacitor
(Universitat Politècnica de Catalunya, 2018-07)
Bachelor thesis
Restricted access - confidentiality agreementRealization/ Investigation of a novel interdigitated capacitor and its efficiency from a nanoparticle deposit (SiO2) and/or an electrolytic gel model. -
Development of novel nanostructured devices for photonic touch sensing
(Universitat Politècnica de Catalunya, 2021-07-10)
Master thesis
Restricted access - confidentiality agreementIn this work the first attempt of developing a novel pressure sensor based on the use of ordered nanostructures embedded on a custom made PDMS optical fiber is shown. When building a nanostructure, the order highly affects ... -
Diseño del Software de control de instrumento HP4142B para caracterización de dispositivos fotovoltaicos
(Universitat Politècnica de Catalunya, 2010)
Master thesis (pre-Bologna period)
Open AccessEl siguiente proyecto final de carrera consiste en la realización de un aplicativo software, en entorno de desarrollo de MATLAB, para facilitar las medidas y caracterización de dispositivos fotovoltaicos por medio del ... -
Diseño y Fabricación de dispositivos Metal-Aislante-Metal utilizando la técnica Electrospray
(Universitat Politècnica de Catalunya, 2014-02-27)
Master thesis
Open AccessAnglès: Nowadays there is an interesting grown of the manipulation of matter at the nanometric scale in order to develop new Nano-devices and to make use of theirs nanometric properties. The research group of Micro and ... -
Diseño y fabricación mediante electrospray de cristales fotónicos Tandem
(Universitat Politècnica de Catalunya, 2016)
Master thesis (pre-Bologna period)
Restricted access - author's decision -
Electrowetting on dielectric: liquid device abrication and multiphysics simulation
(Universitat Politècnica de Catalunya, 2018-07)
Master thesis
Restricted access - confidentiality agreementThe objectives of this master thesis addressed the fabrication problems of electrowetting displays and mirrors. In this work, a reliable and simple microfabrication process for EWOD displays and mirrors has been developed. ... -
EWOD Micro-Liquid lens fabrication technology development
(Universitat Politècnica de Catalunya, 2022-02-01)
Bachelor thesis
Restricted access - confidentiality agreementStudy of the characteristics of the different layers of the EWOD lens and the manufacturing method for each one of them. In addition, the hydrophobic or hydrophilic behavior of a liquid is studied when it is deposited on ... -
Fabricación de membranas con inverse opal
(Universitat Politècnica de Catalunya, 2021-07-02)
Bachelor thesis
Restricted access - confidentiality agreement -
Fabricating large area electrospray devices
(Universitat Politècnica de Catalunya, 2017-01)
Bachelor thesis
Open Access -
Fabrication of photonic devices based on nanosphere colloidal suspensions for sensing applications
(Universitat Politècnica de Catalunya, 2021-07-20)
Master thesis
Restricted access - confidentiality agreementIn this thesis work we will fabricate different types of colloidal crystals, made of electrosprayed layers of polystyrene nanospheres of 300nm size, some of them with an upper deposition of alumina (Al2O3). The colloidal ...