Now showing items 1-14 of 14

  • Análisis de geometrías fractales para resonadores microstrip 

    Extremera Extremera, Manuel Jesus (Universitat Politècnica de Catalunya, 2016-02-25)
    Master thesis (pre-Bologna period)
    Open Access
    Usage and popularity growth of communications satellites has increased the interest on filter synthesis research. Nowadays, the improvement of the trade-off between size, weight, cost and performance is the golden rule. ...
  • Avaluació no invasiva d'implants mèdics (Stents) 

    Carrió Boixeda, Narcís (Universitat Politècnica de Catalunya, 2015-04)
    Master thesis (pre-Bologna period)
    60 months embargo
    Feasibility study of a method to detect irregularities in medical implants (stents) by microwave spectrometry.
  • Design, development and test of ICI radiometer back-end modules in the frame of metop 2nd-gen satellite constellation 

    Albajar Garduño, Marc (Universitat Politècnica de Catalunya, 2018-10)
    Master thesis
    Restricted access - author's decision
    Covenantee:  TRYO
    This Thesis belongs to a scientific project realized by the TRYO Company, which is part of the aerospace sector of the SENER Group. It describes the design, analysis, measurements and results of one of the back-end modules ...
  • Design of planar probes for stent monitoring 

    Amorós García de Valdecasas, Susana (Universitat Politècnica de Catalunya, 2016-07-28)
    Master thesis (pre-Bologna period)
    Restricted access - confidentiality agreement
  • Development of coaxial probes for permitivity measurament of biological samples 

    Cano Campreciós, Marina (Universitat Politècnica de Catalunya, 2019-02)
    Bachelor thesis
    Restricted access - author's decision
  • Evaluation 3D printing technologies for the realization of RF and microwave components 

    Gómez Domínguez, Darío (Universitat Politècnica de Catalunya, 2019-01)
    Master thesis
    Restricted access - confidentiality agreement
    The recent emergence of the 3D printing technology, also called additive manufacturing (AM), and its more than obvious possible application for microwaves purposes leads to a potential improvement in the field of low-cost ...
  • Measurement of permittivity at microwave frequencies using coplanar transmission lines 

    González Martínez, Pedro (Universitat Politècnica de Catalunya, 2017-01)
    Bachelor thesis
    Open Access
    This thesis studies the possibility of using CPW to measure the permittivity of materials. For this purpose, the material to be measured (MUT) is deposited on the CPW and measurements of S parameters are made from which ...
  • Methods for Measuring Permittivity of Biological Samples: Coaxial Probe 

    Rodríguez Utrera, Sergi (Universitat Politècnica de Catalunya, 2016-05)
    Bachelor thesis
    Restricted access - author's decision
    This thesis shows the capacity of a coaxial probe to measure permittivity in biological samples. The project’s aim is to study the optimal parameters which the coaxial probe has to have in order to perform measurements as ...
  • Passive devices in X-Band for space communications 

    Albajar Garduño, Marc (Universitat Politècnica de Catalunya, 2016-02-09)
    Bachelor thesis
    Restricted access - confidentiality agreement
  • Permittivity measurement of biological samples using SIW devices 

    Carreño Megias, Xavier (Universitat Politècnica de Catalunya, 2017-01)
    Bachelor thesis
    Open Access
    La investigación para el muestreo de muestras biológicas ha avanzado buscando sacar la mejor sensibilidad i métodos que no dañen las muestras o incluso las destruyan. Una rama de métodos que es posible que puedan llegar a ...
  • Permittivity measurements using coaxial probes 

    Oliver Riera, Bartomeu (Universitat Politècnica de Catalunya, 2017-05)
    Bachelor thesis
    Open Access
    The main objective of this thesis is to characterize, using the ADS software, the coaxial probe provided by the faculty ETSETB and utilize such probe in order to calculate the permittivity of different materials
  • Permittivity measurement using coupled microstrip resonators 

    Franco Herruzo, Juan José (Universitat Politècnica de Catalunya, 2017-01)
    Bachelor thesis
    Open Access
    This thesis comprises four microstrip resonator designs simulated with ADS and HFSS. The designs subsequently have been physically implemented with the final goal of obtaining the real part of the permittivity of the ...
  • RF Evaluation of vascular implants (stents) 

    Felip, Xavier (Universitat Politècnica de Catalunya, 2019-02)
    Bachelor thesis
    Restricted access - author's decision
  • Sonda RF per al seguiment no-invasiu d'implants mèdics (stents) 

    Cabrera Estanyol, Ferran de (Universitat Politècnica de Catalunya, 2015-01)
    Bachelor thesis
    Restricted access - confidentiality agreement