Now showing items 1-11 of 11

  • 3Cat-1: Attitude determination and control subsystem design 

    Vidal Mateu, David (Universitat Politècnica de Catalunya, 2013-12-10)
    Bachelor thesis
    Open Access
    [ANGLÈS] This project is focused on the design and implementation of an attitude control system for the satellite 3Cat-1. Using a passive system cwith permanent magnets and an active system, consisting of a coil as actuator.
  • Contribution to the application of near ground L-band radiometry 

    Burnham, Colin Jeffrey (Universitat Politècnica de Catalunya, 2019-07-16)
    Master thesis
    Open Access
    ARIEL is an L-band radiometer adapted from Earth Observation satellite technology for use in terrestrial, near to ground surveys of moisture. The key technical benefits are compact size, lightweight, mobility and high pixel ...
  • CubeCat-1: implementation, testing and integration of the communication subsystem 

    Flores Pozo, Kattia Giovana (Universitat Politècnica de Catalunya, 2012-07-26)
    Master thesis
    Open Access
    ABSTRACT CubeCat-1 is an educational oriented Cubesat - a standard, small form factor satellite project started in 2008 in the UPC in Barcelona, under the supervision of professors Adriano Camps and Juan Ramos, with many ...
  • Development and testing of processing software for an airborne soil moisture mapper 

    Jou Barrancos, Marc (Universitat Politècnica de Catalunya, 2018-07-20)
    Master thesis
    Restricted access - author's decision
    Covenantee:  Balam Ingeniería de Sistemas
    Remote sensing is a useful way of obtaining data of a given target without being in physical contact. One of the means of remote sensing is through the use of microwaves. Using passive sensors like radiometers, it is ...
  • Energy Harvesting System for aerospace application 

    Ccorimanya Becerra, Hernan Manuel (Universitat Politècnica de Catalunya, 2013-09-12)
    Master thesis (pre-Bologna period)
    Open Access
    [ANGLÈS] The Energy Harvesting is really interesting concept nowadays because it consists in get energy from the environment that is already there. Nowadays application and commons such as nodes of a wireless network ...
  • Simulació CFD d’una etapa de compressió d’un motor a reacció 

    Noguera Castan, Marc (Universitat Politècnica de Catalunya, 2011-07-18)
    Bachelor thesis
    Open Access
  • Simulació i caracterització d'un simulador solar 

    Lin, Manchun (Universitat Politècnica de Catalunya, 2012-07-09)
    Bachelor thesis
    Open Access
    The objective pursued with this Final Bachelor thesis is to support the activity of Remote Sensing research group of the UPC, which are developing the Cubesat UPCSat-1, a picosatellite with 10x10x10cm dimension (1U). This ...
  • Simulación CFD de la entrada de aire de un motor a reacción 

    Vega Molero, Víctor (Universitat Politècnica de Catalunya, 2011-07-18)
    Bachelor thesis
    Open Access
    La finalidad de este trabajo es el estudio de la entrada de aire de un motor de reacción, en ningún caso optimizar una entrada de aire para unas condiciones de vuelo determinadas Para ello se utilizarán técnicas de ...
  • Simulación CFD de la etapa de turbinado de un motor a reacción 

    Genzor Aragonés, Isaac (Universitat Politècnica de Catalunya, 2011-07-20)
    Bachelor thesis
    Open Access
    Este trabajo tiene como objetivo el estudio del comportamiento de la turbina en un motor de reacción. Para ello, se simula una etapa de turbina en dos dimensiones utilizando técnicas CFD y se pretende analizar la validez ...
  • UPC 3CAT-1. Design and integration of a nanosatellite 

    Surroca Tarradas, Sasha (Universitat Politècnica de Catalunya, 2013-10-25)
    Master thesis (pre-Bologna period)
    Open Access
    [ANGLÈS] This document is a report of the final project on the integration, both physical and electrical of a CubeSat, in this case of the 3 CAT. The project described needed a long learning process about the Cubesat’s ...
  • UPCSat-1: Desarrollo, integración y caracterización de los paneles solares y el sensor óptico 

    Pedret Otero, Alfred (Universitat Politècnica de Catalunya, 2012-05-18)
    Bachelor thesis
    Open Access
    En este proyecto se detalla el proceso de montaje de los paneles solares del UPCSat-1, así como de los diferentes componentes y sensores que equipan estos paneles. Se ha realizado una detallada descripción del proceso y ...