Browsing by Author "Minguella Canela, Joaquim"
Now showing items 1-20 of 46
-
20 idees per connectar empresa i universitat : claus i reptes de la transferència del coneixements a la Universitat Politècnica de Catalunya
(Servei de Comunicació de la UPC, 2020)
Book
Open AccessLa publicació que teniu a les mans recull els fruits del treball fet al llarg de més de quatre anys en el si del Consell Empresarial de la Universitat Politècnica de Catalunya. Durant tot aquest temps, un grup de persones ... -
Advanced manufacturing of ceramics for biomedical applications: Subjection methods for biocompatible materials
(Universidad de Zaragoza (UZA), 2013)
Conference report
Restricted access - publisher's policyThe continuously growing utilization of ceramic compounds in the field of medicine, industry and aerospace, among others, imply a high degree of specialization in terms of the material properties and functionalization due ... -
Assessment of the potential economic impact of the use of AM technologies in the cost levels of manufacturing and stocking of spare part products
(Multidisciplinary Digital Publishing Institute (MDPI), 2018-08-14)
Article
Open AccessAdditive manufacturing (AM) technologies are appropriate manufacturing technologies to produce low rotation products of high added value. Products in the spare parts business usually have discontinuous demand levels of ... -
Biological responses of ceramic bone spacers produced by green processing of additively manufactured thin meshes
(Multidisciplinary Digital Publishing Institute (MDPI), 2020-05-30)
Article
Open AccessBone spacers are exclusively used for replacing the tissue after trauma and/or diseases. Ceramic materials bring positive opportunities to enhance greater osteointegration and performance of implants, yet processing of ... -
Capítulo VI: Procesos de fusión en lecho de polvo aplicados a polímeros
(UNED, 2023-09-29)
Part of book or chapter of book
Restricted access - publisher's policyLos procesos de fusión selectiva de polvo aplicados a polímeros se agrupan, en la clasificación de tecnologías propuesta en la norma ISO/ASTM 52900, en la categoría denominada “fusión de lecho de polvo” (en inglés Powder ... -
Case study on multi-material 3D printing for multiple state sensor units: command joystick set
(2023)
Conference report
Restricted access - publisher's policyIn recent years there has been an increase in the interest, and in the results obtained in the field of functional-graded material applications for achieving active parts via the application of 3D printing technologies. ... -
Characterization of test results of the performance of additive manufacturing parts obtained by selective laser sintering processes incorporating glass and carbon fibres
(2012)
Conference lecture
Restricted access - publisher's policySelective Laser Sintering, and in general Additive Manufacturing Processes are becoming mature technologies; in the sense that after many years of market introduction there are some well-known manufacturers that provide ... -
Comparison of production strategies and degree of postponement when incorporating additive manufacturing to product supply chains
(2017-10-06)
Article
Open AccessThe best-selling products manufactured nowadays are made in long series along rigid product value chains. Product repetition and continuous/stable manufacturing is seen as a chance for achieving economies of scale. ... -
Contribució als algoritmes de construcció de models del món per a la implementació en Arquitectures Àgils de Fabricació
(Universitat Politècnica de Catalunya, 2014-07-16)
Doctoral thesis
Open AccessThe present work composes a contribution towards the Construction of World models for its implementation in 'Agile Manufacturing Architectures', aiming to take a step further the control programs for manufacturing systems, ... -
Decision support models for the selection of production strategies in the paradigm of digital manufacturing, based on technologies, costs and productivity levels
(IntechOpen, 2019-09-12)
Part of book or chapter of book
Open AccessDigital manufacturing has opened a new window in the way to approach the manufacture of parts. The possible switch from manufacturing and holding physical stock to manoeuvring with a fully-digital one is promising but still ... -
Desarrollo de una herramienta de selección de procesos de fabricación basada en técnicas de Inteligencia Artificial
(2009)
Conference lecture
Open AccessLa gran cantidad de procesos de fabricación con los que cuentan actualmente tanto ingenieros como diseñadores industriales hace necesaria la utilización de sistemas basados en ordenador como sistemas de análisis y selección ... -
Design of pastes for direct ink writing of zirconia parts with medical applications
(Scientific.Net, 2023-10-05)
Article
Restricted access - publisher's policyDirect ink writing (DIW) is an extrusion additive manufacturing (AM) technique in which inks are extruded through a nozzle and then deposited layer-by-layer. This technology allows 3D printing many different materials such ... -
Development of a multi-material additive manufacturing process for electronic devices
(2017-10-06)
Article
Open AccessIn order to increas e the versatility of additive manufacturing multimaterial processes, a hybrid system has been developed, which is capable of combining 3D printing technology by DLP (Digital Light Processing) with a two ... -
Development of a multimaterial additive manufacturing process for electronic devices
(2017)
Conference report
Restricted access - publisher's policyIn order to increase the versatility of additive manufacturing multimaterial processes, a hybrid system has been developed, which is capable of combin ing 3D printing technology by DLP (Digital Light Processing) with a two ... -
Development of a multimaterial additive manufacturing process for electronic devices
(2017-10-06)
Article
Open AccessIn order to increase the versatility of additive manufacturing multimaterial processes, a hybrid system has been developed, which is capable of combining 3D printing technology by DLP (Digital Light Processing) with a ... -
Development of a test bench for the experimentation of the electrical performance of 3D printed multi-material parts
(Scientific.Net, 2023-10-06)
Article
Restricted access - publisher's policyObtaining multi-material parts by material extrusion processes is becoming more interesting as the available materials permit achieving superior properties in the 3D printed products. Combining conductive filament with ... -
Digital manufacturing: what are we able to print?
(David Publishing Co., 2017-07-31)
Article
Open AccessIn a rational exercise, in the present paper it is extrapolated how the development of ICTs (information and communication technologies) and the incipient technological development of additive manufacturing has the potential ... -
Experiences in Agile R&D Project Management for New Product Design and Development in the Automotive Industry
(2012)
Conference lecture
Open AccessIn the past 20 years technology has advanced at incredible speed. Product life cycle has decreased tremendously. Innovation in product and process has become essential for companies’ survival. Products are not longer ... -
Foreseeing new multi-material FFF-Additive Manufacturing concepts meeting mimicking requirements with living tissues
(2019)
Article
Open AccessThe development of additive manufacturing (AM) during the last years has revolutionized not only the industry, but also the medical sector. This alongside the necessity in our society and in medicine to enhance the quality ... -
Implementation of intelligent manufacturing algorithms in agile architectures for production: world models for systems incorporating binary and continuous variables
(S. Ekinovic, S. Yalcin, J. Vivancos., 2014)
Conference lecture
Open AccessBuilding in previous works of the authors, the present paper focuses on the extension of the Algorithms described for the specific case study of binary systems (systems in which each variable can take one out of two ...
