Exploració per autor "Bonada Bo, Jordi"
Ara es mostren els items 1-20 de 42
-
An investigation on the design of steel storage rack columns via the direct strength method
(2012-04-11)
Article
Accés restringit per política de l'editorialThe paper presents an attempt to predict the load carrying capacity of perforated rack columns by means of the Direct Strength Method (DSM). The investigation is focused on two different issues: the prediction of the ... -
Analysis of pallet rack beam members through a nonlinear GBT formulation with sectional constraints
(2021)
Text en actes de congrés
Accés obertThin-walled open cross-sections are commonly used in steel storage pallet rack structures. In some cases, open sections are employed as beam members. These beam members usually have weld spots along their length in order ... -
Analysis of printing parameters for metal additive manufactured parts through Direct Ink Writing process
(2020-03-09)
Article
Accés obertDirect Ink Writing is an Additive Manufacturing process in which a metal ink is continuously extruded to built-up a green metal part. Therefore, a debinding and sintering process is required to obtain the final metal part. ... -
Analysis of the Compression Behaviour of Reinforced Photocurable Materials Used in Additive Manufacturing Processes Based on a Mask Image Projection System
(Multidisciplinary Digital Publishing Institute (MDPI), 2021-08-16)
Article
Accés obertMask image projection based on stereolithography is an additive manufactured technology based on a Frontal Photopolymerization Process. Therefore, photocurable resins are used to build-up parts layer by layer. In this ... -
Anàlisi del comportament a compressió de perfils prims oberts d'acer conformats en fred
(Universitat Politècnica de Catalunya, 2014-01-23)
Tesi
Accés obertCold-formed thin-walled steel sections are frequently used in pallet rack structures. This type of cross-sections are normally used as a columns and contains perforations uniformly distributed enabling the connection between ... -
Circular economy in practice: the fenix project
(2018)
Text en actes de congrés
Accés restringit per política de l'editorialCircular economy is a concept even more exploited by governments and companies to share green principles. However, its real adoption at industrial level remains limited to either small-scaled pilot plants or appositely ... -
Comparison between numerical models for unbraced multiple bay pallet racks
(John Wiley & sons, 2023)
Text en actes de congrés
Accés obertUnbraced conventional pallet racks are structures intended for the storage of goods (commonly palletized); they are composed of vertical uprights, horizontal beams, and braces, connected together to form a steel skeleton-like ... -
Cost-effectively 3d-printed rigid and versatile interpenetrating polymer networks
(Multidisciplinary Digital Publishing Institute (MDPI), 2021-08-02)
Article
Accés obertVersatile acrylate–epoxy hybrid formulations are becoming widespread in photo/thermal dual-processing scenarios, especially in 3D printing applications. Usually, parts are printed in a stereolithography or digital light ... -
Cross-aisle stiffness analysis of industrial welded cold-formed steel rack upright frames
(2019-08-01)
Article
Accés obertIn general, industrial cold-formed steel pallet racks consist of upright frames and pallet beams. In the United States, typically, the upright frames are made welding the braces to the uprights. If the brace to upright ... -
Cross-sectional optimization of perforated pallet rack columns against distortional and global buckling
(2023-11)
Article
Accés restringit per acord de confidencialitatThis paper presents a cross-sectional optimization procedure to increase the load carrying capacity of a perforated rack column under a compression load. The optimization method is based on a Genetic Algorithm (GA) combined ... -
Customary light-gauge steel framing construction with flat strap bracing. Seismicity limits for short to mid-rise buildings in Europe
(Springer, 2023-11-20)
Article
Accés obertOrdinary (customary) light gauge steel framing is a convenient construction technology; however, given the studs low axial capacity, it has been considered mainly for low-rise buildings in low seismicity regions. This paper ... -
Determination of beam-to-column connection characteristics in pallet rack structures: a comparison of the EN and ANSI methods and an analysis of the influence of the moment-to-shear ratios
(2013-05-14)
Article
Accés restringit per política de l'editorialhe beam-to-column connections in most of the pallet rack structures made of thin-walled steel sections are of the clip-on type. These connections are of a semi-rigid nature and have a non-linear moment–rotation relationship, ... -
Development of a multi-material additive manufacturing process for electronic devices
(2017-10-06)
Article
Accés obertIn order to increas e the versatility of additive manufacturing multimaterial processes, a hybrid system has been developed, which is capable of combining 3D printing technology by DLP (Digital Light Processing) with a two ... -
Development of a multimaterial additive manufacturing process for electronic devices
(2017)
Text en actes de congrés
Accés restringit per política de l'editorialIn order to increase the versatility of additive manufacturing multimaterial processes, a hybrid system has been developed, which is capable of combin ing 3D printing technology by DLP (Digital Light Processing) with a two ... -
Development of a multimaterial additive manufacturing process for electronic devices
(2017-10-06)
Article
Accés obertIn order to increase the versatility of additive manufacturing multimaterial processes, a hybrid system has been developed, which is capable of combining 3D printing technology by DLP (Digital Light Processing) with a ... -
Distortional influence of pallet rack uprights subject to combined compression and bending
(Elsevier, 2016-05-24)
Article
Accés obertA pallet rack is a structure in which the beams and uprights are cold-formed steel sections. The beam-upright connections are normally clipped in order to select the beam levels required and for ease of assembly. For this ... -
Dual-curable stereolithography resins for superior thermomechanical properties
(2020-09-01)
Article
Accés obertStereolithography (SL) stands out as a relatively fast additive manufacturing method to produce thermoset components with high resolutions. The majority of SL resins consist of acrylate monomers which result in materials ... -
Elastic asymmetry of PLA material in FDM-printed parts: considerations concerning experimental characterisation for use in numerical simulations
(MDPI AG, 2019-12-18)
Article
Accés obertThe objective of this research is to characterise the material poly lactic acid (PLA), printed by fused deposition modelling (FDM) technology, under three loading conditions—tension, compression and bending—in order to get ... -
Epoxy Doped, Nano-scale Phase-separated Poly-Acrylates with Potential in 3D Printing
(2021-01-01)
Article
Accés obertAn efficient method to improve the mechanical performance of a commercially available photocure resin is described wherein the resin is modified with a mixture of a cycloaliphatic epoxy and an anhydride curing agent. ... -
Estudi de deformacions i tensions residuals que resulten del procés de fabricació de perfils prims oberts de xapa d'acer conformats en fred
(Universitat Politècnica de Catalunya, 2010-03)
Projecte/Treball Final de Carrera
Accés obertL’objectiu bàsic del projecte és l’estudi del conformat per laminat en fred de perfils prims oberts, per tal d’obtenir les tensions residuals que es generen en el procés de fabricació, així com comprendre el funcionament ...
