Exploració per altres contribucions "Martín García, Isidro"

Ara es mostren els items 1-20 de 26

    • A CANopen interface for substituting a proprietary communication protocol in custom hardware devices 

      Rovira Buxadera, Alexandra (Universitat Politècnica de Catalunya, 2022-09-07)
      Projecte Final de Màster Oficial
      Accés restringit per acord de confidencialitat
      Realitzat a/amb:   Hewlett Packard Española
      We consider a system architecture where the communication between the remote devices and a central controller is done using a custom application protocol on top of CAN. CANopen is a communication protocol based on CAN that ...

    • Control y mejoras del instrumento Sinton WCT-100 para medidas de tiempo de vida de los portadores en c-Si 

      Díaz Puertas, Natalia (Universitat Politècnica de Catalunya, 2008-12-01)
      Projecte/Treball Final de Carrera
      Accés obert
      Realitzat a/amb:   Sinton Instruments
      En los últimos diez años se ha producido un crecimiento global muy importante en el mercado fotovoltaico. El principal objetivo es reducir los costes de la generación fotovoltaica, de manera que resulte competitiva ...

    • Countermeasure implementation and effectiveness analysis for AES resistance against side channel attacks 

      Zubeldia Oategui, Asier Matias (Universitat Politècnica de Catalunya, 2021-06)
      Projecte Final de Màster Oficial
      Accés obert
      Side Channel Analysis (SCA) is composed of a bunch of techniques employed to extract secret information from hardware operations through statistical analyses of execution data. For instance, the secret key of a crypto-algorithmic ...

    • Custom nonlinearity profile for integrated quantum light sources 

      Poveda Hospital, Salvador (Universitat Politècnica de Catalunya, 2022-06-13)
      Projecte Final de Màster Oficial
      Accés obert
      Realitzat a/amb:   École polytechnique de Montréal
      Heralded single-photon sources are a fundamental building block for optical quantum technologies. These sources need to be unfiltered and integrated to have good scalability and avoid unnecessary losses. To attain this ...

    • Design and fabrication of a single electron transistor (SET) 

      Aizpurua Iraola, Gorka (Universitat Politècnica de Catalunya, 2023-07-12)
      Projecte Final de Màster Oficial
      Accés obert
      Realitzat a/amb:   Institut de Microelectrònica de Barcelona
      In this master's thesis, the design and development of the manufacturing process of a single electron transistor (SET) in silicon has been carried out. A SET is a basic building block for the realization of qubits based ...

    • Design and integration of control electronics for distance and airflow management 

      Arnaiz Martínez, David (Universitat Politècnica de Catalunya, 2018-07)
      Projecte Final de Màster Oficial
      Accés obert
      Product design methodology has been redefined to face the new challenges imposed by today?s markets, highlighted by the rapid increase in technology and the low live span of the current trends. To overcome the new challenges, ...

    • Design of a power amplifier for capacitive loads 

      Janer I Serramià, Arnau (Universitat Politècnica de Catalunya, 2019-10)
      Projecte Final de Màster Oficial
      Accés restringit per decisió de l'autor

    • Development of a functional prototype of smartglasses 

      Sánchez Abellán, Aitor (Universitat Politècnica de Catalunya, 2017-01)
      Projecte Final de Màster Oficial
      Accés obert

    • Development of hole selective contacts on p-type c-Ge substrates 

      Lladós Cos, Òscar (Universitat Politècnica de Catalunya, 2020-12)
      Projecte Final de Màster Oficial
      Accés obert
      Thermophotovoltaic devices convert heat to electricity by absorbing infra-red photons with low energies. In order to do so semiconductors materials with low band-gap are needed. The crystalline Germanium (cGe) is an ...

    • Development of thin films deposited by ALD for c-Si solar cells 

      Pérez Guardia, Javier (Universitat Politècnica de Catalunya, 2017-01)
      Treball Final de Grau
      Accés obert
      In this work, we have developed thin layers deposited by Atomic Layer Deposition (ALD) technique to be applied in high-efficiency crystalline silicon solar cells. In particular, we selected to study the aluminium oxide ...

    • Development of titanium nitride (TiN) as electron transport layer for c-Si solar cells 

      Maan, Mandeep (Universitat Politècnica de Catalunya, 2019-10)
      Projecte Final de Màster Oficial
      Accés restringit per acord de confidencialitat

    • Experimental setup for carrier lifetime measurement based on photoluminescence response. Design, construction and calibration 

      Nogueira Vázquez, Luis (Universitat Politècnica de Catalunya, 2009-07-20)
      Projecte/Treball Final de Carrera
      Accés obert
      The measurement of the effective carrier lifetime in silicon has a great importance for material characterization in the photovoltaic field since carrier lifetime represents a fundamental quality factor in solar cell ...

    • FW development and validation for Mesh network devices for Smart Cities 

      Tong González, Melvin Carles (Universitat Politècnica de Catalunya, 2019-09)
      Projecte Final de Màster Oficial
      Accés restringit per acord de confidencialitat

    • High power LED array for thin c-Si carrier lifetime measurements 

      Gómez Ortega, Laura (Universitat Politècnica de Catalunya, 2016-07-11)
      Treball Final de Grau
      Accés obert
      To measure crystalline silicon (c-Si) carrier lifetime, the Sinton WCT-100 with a flash lamp is available at the laboratories of the UPC?s Electronic Engineering Department. However, this setup is not accurate to measure ...

    • Hole selective contacts for rear surface of c-Ge TPV devices 

      Rivera Vila, Gerard (Universitat Politècnica de Catalunya, 2023-06-22)
      Projecte Final de Màster Oficial
      Accés obert
      This work characterizes a technique for creating hole-selective contacts on the rear surface of crystalline germanium thermophotovoltaic cells. The technique consists in creating localized p-type contacts by laser-firing ...

    • Improvement of highly-doped regions from laser processed dielectric films 

      Almirall Canudas, Xavier (Universitat Politècnica de Catalunya, 2017-05)
      Treball Final de Grau
      Accés obert
      This TFG is focused on the development of high quality n+ and p+ regions based on laser processed dielectric films. The involved films consist of a thin intrinsic amorphous silicon layer (a-Si:H(i)) capped with a doped ...

    • Interdigitated back contacts solar cell based on thin crystalline silicon substrates 

      Jin, Chen (Universitat Politècnica de Catalunya, 2018-10-31)
      Tesi
      Accés obert
      This thesis contributes to the fabrication technology of c-Si solar cells on thin substrates based on Interdigitated Back-Contacted (IBC) structures. The potential of this structure to obtain high efficiencies is well-known. ...

    • Interdigitated back-contacted(IBC) c-Si solar cells based on laser processed dielectric layers 

      López Rodríguez, Gema (Universitat Politècnica de Catalunya, 2016-12-05)
      Tesi
      Accés obert
      The goal of this thesis is the fabrication of high-efficiency interdigitated back-contact (IBC) c-Si solar cell at low temperature and low-cost manufacturing technology. This thesis proposes a new concept and at the same ...

    • Mejora de un instrumento de medida del tiempo de vida de los portadores en el silicio cristalino 

      Portocarrero Ancasi, Vanessa (Universitat Politècnica de Catalunya, 2007-09-19)
      Projecte/Treball Final de Carrera
      Accés obert
      En las últimas décadas, el silicio ha revolucionado nuestra vida cotidiana. El origen de esta revolución se debe en parte al abaratamiento de las técnicas de obtención de silicio cristalino de alta calidad. Dicha calidad ...

    • Optical enhancement of solar cells using texturized PDMS films 

      Rosell Canet, Arnau (Universitat Politècnica de Catalunya, 2018-06)
      Treball Final de Grau
      Accés obert
      The main objective of the photovoltaic sector is to augment the amount of energy supplied by each solar cell keeping the price as low as possible. This means brain struggle for researches to approach the solar problem from ...