Browsing by Author "Niubó Eslava, Maria"
Now showing items 1-11 of 11
-
Analysis of printing parameters for metal additive manufactured parts through Direct Ink Writing process
(2020-03-09)
Article
Open AccessDirect Ink Writing is an Additive Manufacturing process in which a metal ink is continuously extruded to built-up a green metal part. Therefore, a debinding and sintering process is required to obtain the final metal part. ... -
Diseño y caracterización de mezclas EVA/plastómero para su empleo en compuestos de aislamiento acústico
(2010-06-23)
Conference lecture
Restricted access - publisher's policyEn el desarrollo de materiales aislantes acústicos para sectores como la automoción, se utilizan habitualmente compuestos poliméricos con un contenido en cargas inorgánicas superior al 70% en peso. Este hecho obliga a ... -
Experimental assessment of an analytical model of the convective heat transfer coefficient in a mine gallery
(Springer Nature, 2022-04-07)
Article
Open Access -
Influence of the electric arc furnace dust in the physical and mechanical properties of EVA-polyethylene-butene blends
(2011-05-24)
Article
Restricted access - publisher's policyThis study assesses the processing behaviour and mechanical properties of different thermoplastic polymers filled with Electric Arc Furnace Dust (EAFD). Design of Experiments (DoE) approach enabled the evaluation of the ... -
Key parameters for assessing the deterioration of reinforced concrete pipes in water networks
(Multidisciplinary Digital Publishing Institute (MDPI), 2024-08-22)
Article
Open AccessWater utilities are facing significant challenges, such as supplying, with less water resources, more and more water due to population growth, amid the current scenario of climate change. In this context, urban water systems ... -
Magnesium phosphate cement formulated with low grade magnesium oxide with controlled porosity and low thermal conductivity as a function of admixture
(2016-10)
Article
Open AccessMagnesium phosphate cement (MPC) formulated with low-grade magnesium oxide (LG-MgO) can be better considered as sustainable MPC (sust-MPC). Among other properties, sust-MPC could be used as building material for constructive ... -
On the adhesion of sinusoidal surfaces
(2024-10-01)
Article
Restricted access - publisher's policyIn this work, we study the adhesive loading and unloading of a one-dimensional sinusoidal surface and use design of experiments to provide for response surface maps for the work of adhesion and the interaction length, which ... -
Pilot-scale road subbase made with granular material formulated with MSWI bottom ash and stabilized APC fly ash: environmental impact assessment
(2014-02-15)
Article
Restricted access - publisher's policyA granular material (GM) to be used as road sub-base was formulated using 80% of weathered bottom ash (WBA) and 20% of mortar. The mortar was prepared separately and consisted in 50% APC and 50% of Portland cement. A ... -
Problemas
(Universitat Politècnica de Catalunya, 2010-09)
Problem statement, exercise
Open Access -
Study of the effect of EAFD in polymer composites usig DoE
(Eurofillers 2009, 2009)
Conference lecture
Open AccessThis study assesses the processing behaviour and mechanical properties of different polymers widely used in several industry fields formulated with Electric Arc Furnace Dust (EAFD) as filler. Design of Experiments (DoE) ... -
Synergistic effect of the parameters affecting wet flue gas desulfurization using magnesium oxides by-products
(2015-02-15)
Article
Restricted access - publisher's policyA previous study carried out by the authors allowed to identify the optimum MgO by-product for a 100% SO2 removal efficiency in a wet flue gas desulfurization (FGD) process. The present research analyzes the synergistic ...
