Now showing items 1-5 of 5

    • Caracterización del comportamiento a fractura de un polipropileno copolímero espumado 

      Gómez Monterde, Javier; Franco Urquiza, Edgar Adrian; Sánchez Soto, Miguel; Arencón Osuna, David; Santana Pérez, Orlando Onofre; Docampo, RAmon; Maspoch Rulduà, Mª Lluïsa (2014)
      Conference report
      Restricted access - publisher's policy
      En el presente trabajo se ha aplicado el concepto de Trabajo Esencial de Fractura (EWF) a un copolímero etilenopropileno en bloque (EPBC) espumado, cuyas características morfológicas y mecánicas eran conocidas. Las ...
    • Characterization of microcellular plastics for weight reduction in automotive interior parts 

      Gómez Monterde, Javier (Universitat Politècnica de Catalunya, 2017-02-17)
      Doctoral thesis
      Open Access
      The present PhD thesis is framed within the Industrial Doctorate Plan promoted by the Generalitat de Catalunya and has been developed in cooperation between the Universitat Politècnica de Catalunya-BarcelonaTech, the Centre ...
    • Effect of microcellular foaming on the fracture behavior of ABS polymer 

      Gómez Monterde, Javier; Schulte, M.; Ilijevic, Stefan; Hain, J; Sánchez Soto, Miguel; Santana Pérez, Orlando Onofre; Maspoch Rulduà, Mª Lluïsa (2016)
      Article
      Open Access
      In this work, the properties of microcellular ABS were studied. Foamed samples exhibited a solid skin/foamed core struc- ture, with some elongated cells in the flow direction, while spherical cells were mostly observed in ...
    • Morphology and mechanical characterization of ABS foamed by microcellular injection molding 

      Gómez Monterde, Javier; Schulte, M.; Ilijevic, Stefan; Hain, J; Arencón Osuna, David; Sánchez Soto, Miguel; Maspoch Rulduà, Mª Lluïsa (2015)
      Article
      Open Access
      In the present work ABS was used to inject cylindrical test bars, obtaining solid and foamed specimens. By varying the gas content, two levels of weight reduction were achieved. Morphology analysis revealed the presence ...
    • Morphology and mechanical characterization of ABS foamed by microcellular injection moulding 

      Gómez Monterde, Javier; Schulte, M; Ilijevic, Stefan; Hain, J; Arencón Osuna, David; Sánchez Soto, Miguel; Maspoch Rulduà, Mª Lluïsa (2015)
      Conference report
      Restricted access - publisher's policy
      In the present work ABS was used to inject cylindrical test bars, obtaining solid and foamed especimens. By varying the gas content, two levels of weight reduction were achieved. Morphology analysis revealed the presence ...