Browsing by Author "Manero Planella, José María"
Now showing items 1-20 of 95
-
A dual molecular biointerface combining RGD and KRSR sequences improves osteoblastic functions by synergizing integrin and cell-membrane proteoglycan binding
(2019-03-21)
Article
Open Access
Covenantee: Universitat Internacional de CatalunyaSynergizing integrin and cell-membrane heparan sulfate proteoglycan signaling on biomaterials through peptidic sequences is known to have beneficial effects in the attachment and behavior of osteoblasts; however, controlling ... -
A low elastic modulus Ti-Nb-Hf alloy bioactivated with an elastin-like
(2012)
Article
Restricted access - publisher's policy
Covenantee: Universidad de Valladolidb-type titanium alloys with low Young’s modulus are desirable to reduce stress shielding effect and enhance bone remodeling for implants used to substitute failed hard tissue. For biomaterials application, the surface ... -
A novel peptide-based platform for the dual presentation of biologically-active peptide motifs on biomaterials
(2014-03-27)
Article
Restricted access - publisher's policyBiofunctionalization of metallic materials with cell adhesive molecules derived from the extracellular matrix is a feasible approach to improve cell–material interactions and enhance the biointegration of implant materials ... -
Aleaciones ligeras
(Edicions UPC, 2001)
Book
Restricted access to the UPC academic communityEl presente libro trata de presentar en cinco temas la metalurgia de las aleaciones ligeras. En los tres primeros se tratan el aluminio, el titanio y el magnesio y sus aleaciones. En cada uno de ellos se hace referencia a ... -
All-in-one trifunctional strategy: A cell adhesive, bacteriostatic and bactericidal coating for titanium implants
(2018-09-01)
Article
Open AccessStrategies to inhibit initial bacterial adhesion are extremely important to prevent infection on biomaterial surfaces. However, the simultaneous attraction of desired eukaryotic cells remains a challenge for successful ... -
Anhydride-functional silane immobilized onto titanium surfaces induces osteoblast cell differentiation and reduces bacterial adhesion and biofilm formation
(2016-02-01)
Article
Open AccessBacterial infection in dental implants along with osseointegration failure usually leads to loss of the device. Bioactive molecules with antibacterial properties can be attached to titanium surfaces with anchoring molecules ... -
Antibacterial coatings on titanium surfaces: A comparison study between in vitro single-species and multispecies biofilm
(2015-03-18)
Article
Open AccessDental plaque is a biofilm that Causes dental caries, gingivitis, and periodontitis. Most of the studies in antibacterial coatings have been conducted by in vitro Single-species biofilm formation, but oral biofilm involves ... -
Antibacterial PHAs coating for titanium implants
(2017-05-01)
Article
Open AccessBiomaterial-associated infection is a serious complication of modern implantation surgery. Thus, the improvement of implant surfaces is required to avoid the first stage for biofilm formation, bacterial adhesion. The current ... -
Antibacterial Properties of hLf1-11 Peptide onto Titanium Surfaces: A Comparison Study Between Silanization and Surface Initiated Polymerization
(2015-02-01)
Article
Open AccessDental implant failure can be associated with infections that develop into peri-implantitis. In order to reduce biofilm formation, several strategies focusing on the use of antimicrobial peptides (AMPs) have been studied. ... -
Antimicrobial PHAs coatings for solid and porous tantalum implants
(2019-10-01)
Article
Open AccessBiomaterial-associated infections (BAI) are the major cause of failure of indwelling medical devices. The risk of BAI can end dramatically in the surgical removal of the affected device. Therefore, a major effort must be ... -
Assessment and comparison of surface chemical composition and oxide layer modification upon two different activation methods on a CoCrMo alloy
(2014)
Article
Restricted access - publisher's policyThis study investigated the effect of two different activation methods on the surface chemical composition of a CoCrMo-alloy. The activation was performed with oxygen plasma (OP) or nitric acid (NA). The surface ... -
Bioactive compounds immobilized on Ti and TiNbHf: AFM-based investigations of biofunctionalization efficiency and cell adhesion
(2015)
Article
Open Access
Covenantee: Technische Universität MünchenImplant materials require optimal biointegration, including strong and stable cell-material interactions from the early stages of implantation. Ti-based alloys with low elastic modulus are attracting a lot of interest for ... -
Bioactivity and antibacterial properties of calcium- and silver-doped coatings on 3D printed titanium scaffolds
(Elsevier, 2021-09)
Article
Restricted access - publisher's policy
Covenantee: Institut de Bioenginyeria de Catalunya / AMESOne of the major problems faced by metallic implants is the high probability of bacterial infections, with significant consequences for the patient. In this work, a thermochemical treatment is proposed to obtain silver-doped ... -
Biofunctionalization of REDV elastin-like recombinamers improves endothelialization on CoCr alloy surfaces for cardiovascular applications
(2015-03-01)
Article
Open Access
Covenantee: Universidad de ValladolidTo improve cardiovascular implant success, metal-based stents are designated to modulate endothelial cells adhesion and migration in order to prevent restenosis and late thrombosis diseases. Biomimetic coatings with ... -
Biomedical applications of powder metallurgy
(Elsevier, 2021-09-01)
Part of book or chapter of book
Restricted access - publisher's policyThe performance and properties of Titanium (Ti) and its alloys can be fully exploited for biomedical applications such as orthopedic and dental implants, when porous structures are used. Such Ti structures can matched the ... -
Blocking methods to prevent non-specific adhesion of mesenchymal stem cells to titanium and evaluate the efficiency of surface functionalization: albumin vs poly(ethylene glycol) coating
(Sociedad Ibérica de Biomecánica y Biomateriales, 2014)
Article
Open AccessSurface modification of biocompatible materials with biologically-active molecules is a well-known strategy to enhance the osteointegration of implantable devices. In order to evaluate the efficiency of these treatments, ... -
Caracterización mecánica y microestructural de nuevas aleaciones multifuncionales de Titanio B libres de Ni para aplicaciones biomédicas
(2007)
Article
Open AccessEl objetivo del presente trabajo es diseñar, obtener y caracterizar, mecánica y microestructuralmente, aleaciones de Ti en fase B , libre de Níquel, con memoria de forma y/o bajo módulo elástico para aplicaciones médicas. ... -
Cell adhesive peptides functionalized on CoCr alloy stimulate endothelialization and prevent thrombogenesis and restenosis
(2017-04-01)
Article
Open Access
Covenantee: Hospital Clínic i Provincial de BarcelonaImmobilization of bioactive peptide sequences on CoCr surfaces is an effective route to improve endothelialization, which is of great interest for cardiovascular stents. In this work, we explored the effect of physical and ... -
Characterization of two Ti-Nb-Hf-Zr alloys under different cold rolling conditions
(2011-04-06)
Article
Restricted access - publisher's policyThe objective of this study is to obtain a new biomaterial to use in the load transfer medical implants field. The influence of cold work in the thermoelastic martensitic transformation and elastic modulus was investigated ... -
Chitosan patterning on titanium alloys
(2017)
Article
Open Access
Covenantee: Universitat Politècnica de València. Centro de Biomateriales e Ingeniería TisularTitanium and its alloys are widely used in medical implants because of their excellent properties. However, bacterial infection is a frequent cause of titanium-based implant failure and also compromises its osseointegration. In ...
