Browsing by Author "Azpúrua Auyanet, Marco Aurelio"
Now showing items 1-20 of 68
-
A comparison of spatial interpolation methods for estimation of average electromagnetic field magnitude
(2010)
Article
Restricted access - publisher's policySeveral georeferenced measurements of electric field were done in a pilot area of Caracas, Venezuela, to verify that the magnitude of radio frequency electromagnetic fields is below the human exposure limits, recommended ... -
A measurement system for radiated transient electromagnetic interference based on general purpose instruments
(Institute of Electrical and Electronics Engineers (IEEE), 2015)
Conference report
Open AccessThis paper presents a measurement system intended to be used to assets the radiated electromagnetic interference (EMI) in both time and frequency domains. In order to keep the measurement setup as accessible and practical ... -
A proposed method for quantifying uncertainty in RF immunity testing due to EUT presence
(2011)
Article
Restricted access - publisher's policyThroughout the performance of a RF immunity test according IEC 61000-4-3 there are several factors that should be taken into account to ensure the quality and to estimate the uncertainty associated to the results. One ... -
A review on the drawbacks and enhancement opportunities of the feature selective validation
(2014-08-01)
Article
Restricted access - publisher's policyThe growing application of simulation tools to increasingly complex problems makes the use of validation techniques essential to improve confidence in the veracity of those simulation results. The feature selective validation ... -
A semi-analytical method for the design of coil-systems for homogeneous magnetostatic field generation
(2012)
Article
Restricted access - publisher's policyThis paper proposes a simple semi-analytical method for designing coil-systems for homogeneous magnetostatic field generation. The homogeneity of the magnetic field and the average magnitude of the magnetic flux density ... -
A single antenna ambient noise cancellation method for in-situ radiated EMI measurements in the time-domain
(2016)
Conference report
Open AccessThis paper presents a single antenna ambient noise cancellation method for in-situ radiated emissions measurements performed using an entirely time-domain approach and the sliding window Empirical Mode Decomposition. The ... -
Alternative conducted immunity tests
(2016-12-14)
Article
Open AccessConducted immunity tests are always performed by the use of CDNs in laboratories in accordance with the standard EN61000-4-6. However, it is not always possible to use CDNs because of some limitations. If the EUT (Equipment ... -
An interpolation method to calibrate electromagnetic probes in semi-anechoic chambers
(2012)
Article
Restricted access - publisher's policyBased upon the standard IEEE 1309, a new calibration method for electromagnetic (EM) probes is proposed. The aforementioned method compares the electric field strength measured with the EM probe subject to calibration with ... -
Analyzing electromagnetic interference effects in wireless healthcare equipment and environments
Conference report
Restricted access - publisher's policyThis study explores the effects of electromagnetic emitters and operational environments on healthcare equipment, specifically electrocardiogram signal transmission over wireless local area networks as an example. Numerical ... -
APD outdoors time-domain measurements for impulsive noise characterization
(Institute of Electrical and Electronics Engineers (IEEE), 2017)
Conference report
Open AccessA novel measurement and post-processing technique for estimating if impulsive noise is capable of degrading the performance of digital communication systems (DCS) is presented. It is based on the well-known capability of ... -
Benefits of full time-domain EMI measurements for large fixed installation
(2016)
Conference report
Open AccessIt is difficult to properly evaluate the electromagnetic disturbances generated by large fixed installations because of, i.e., the background noise, unsteady emissions and transient interferences. Those challenging EMC ... -
Broadband effective dielectric permittivity of heterogeneous 3D printed PLA structures
(Institute of Electrical and Electronics Engineers (IEEE), 2022)
Conference report
Open Access3D printing and additive manufacturing technologies are increasingly being employed for electronics, RF, and microwave applications because they allow high design flexibility at low cost and rapid prototyping. The intrinsic ... -
Comparison of the GUM and Monte Carlo Methods for the uncertainty estimation in electromagnetic compatibility testing
(2011)
Article
Restricted access - publisher's policyThe rigorous uncertainty estimation in Electromagnetic Compatibility (EMC) testing is a complex task that has been addressed through a simplified approach that typically assumes that all the contributions are uncorrelated ... -
Conducted emissions verification setup improvement for space applications
(Institute of Electrical and Electronics Engineers (IEEE), 2023)
Conference report
Open AccessJust-before-test verification is needed to ensure that electromagnetic interference measurements are correctly performed. Some standards cover such specific requirements regarding test verification, this is the case of the ... -
Decomposition of electromagnetic interferences in the time-domain
(2016-01-26)
Article
Open AccessElectromagnetic interferences are potentially very complex signals formed by the superposition of transient (broadband) and continuous wave (narrowband) components with significant randomness in both amplitude and phase. ... -
Design and validation of a test fixture for studying RF current flux through mechanical aircraft joints
(Institute of Electrical and Electronics Engineers (IEEE), 2022)
Conference lecture
Open AccessThe study of electric currents flowing through the airframe is important from an EMC standpoint due to the potential to cause severe aircraft failures. Nevertheless, this is a challenging task because of the complex shape, ... -
Distance conversion factors for in situ H-field emissions tests
(2024-12-02)
Article
Open AccessThis paper derives and validates a set of distance conversion factors for the magnetic field emissions limits in the frequency range from 9 kHz to 30 MHz, which are intended to be proposed for their inclusion in new ... -
Dynamic performance evaluation of full time domain EMI measurement systems
(Institute of Electrical and Electronics Engineers (IEEE), 2018)
Conference report
Open AccessThis paper presents the evaluation of the performance of Full Time Domain Electromagnetic Interference measurement systems in terms of the noise figure, the linearity, the dynamic range, the voltage standing wave ratio and ... -
Efficient in situ assessment of radiated emissions using time-domain measurements
(Institute of Electrical and Electronics Engineers (IEEE), 2023)
Conference report
Open AccessThis paper presents three different case studies where the electromagnetic emissions of atypical equipment (a photovoltaic system, a passenger boarding bridge and a pallet washing machine) have been assessed in situ using ... -
Electromagnetic characterization of 3D printed antennas employing conductive filament
(Institute of Electrical and Electronics Engineers (IEEE), 2020)
Conference report
Restricted access - publisher's policyThis work presents the need to accurately define EM characterization of novel materials like the 3D conductive filament. Although these construction techniques and materials are currently used by the industry, the influence ...
