Browsing by Author "Reyes Pozo, Guillermo"
García Granada, Andrés Amador; Gómez Gras, David; Jerez Mesa, Ramón; Travieso Rodriguez, Jose Antonio; Reyes Pozo, Guillermo (2017-04-12)
Open AccessBall-burnishing induces compressive residual stresses on treated materials by the effect of plastic deformation. The result is an increase in the fatigue life of the treated part, retarding the initiation of cracks on the ...
Flexural properties and failure mechanism assessment for additive manufactured lom bars on different building orientations Olivier, D.; Travieso Rodriguez, Jose Antonio; Borrós, S; Reyes Pozo, Guillermo (2011)
Open AccessPlastic Laminated Object Manufacturing has not been assessed from the flexural properties point of view. The deflection range in parts manufactured by this technique is wider than in parts fabricated by other additive ...
Influence of building orientation on the flexural strength of laminated object manufacturing specimens Olivier, Djamila; Travieso Rodriguez, Jose Antonio; Borrós Gómez, Salvador; Reyes Pozo, Guillermo; Jerez Mesa, Ramón (Springer, 2017)
Open AccessThis study aims to define the best building orientation for components produced via the Laminated object manufacturing (LOM) technique to enhance their flexural performance. Results of previous research show that components ...
Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts Domingo Espín, Miquel; Puigoriol Forcada, Josep M.; García Granada, Andrés Amador; Llumà Fuentes, Jordi; Borrós Gómez, Salvador; Reyes Pozo, Guillermo (2015-10-15)
Restricted access - publisher's policyBuilding end-use functional parts with additive manufacturing (AM) technologies is a challenging task. Several factors influence their surface finish, dimensional accuracy, mechanical properties and cost. Their orientation ...