DSpace DSpace UPC
 English   Castellano   Català  

Treballs academics UPC >
Màsters Oficials >
Màster universitari en Enginyeria Mecànica - EMMME >

Empreu aquest identificador per citar o enllaçar aquest ítem: http://hdl.handle.net/2099.1/4498

Arxiu Descripció MidaFormat
finished report.pdfReport3,57 MBAdobe PDFVeure/Obrir
Finished Annex.pdfAnnex4,3 MBAdobe PDFVeure/Obrir

Títol: Setup of the Manufacturing Process and Economic Study of the Gear Box for Industrial Vehicle
Autor: Wongthianchai, Sarawut
Tutor/director/avaluador: Buj Corral, Irene Veure Producció científica UPC
Universitat: Universitat Politècnica de Catalunya
Càtedra /Departament: Universitat Politècnica de Catalunya. Departament d'Enginyeria Mecànica
Matèries: Àrees temàtiques de la UPC::Enginyeria mecànica::Disseny i construcció de vehicles
Recycling (waste, etc.)
Commercial vehicles environmental aspects
Reciclatge (Residus, etc.)
Vehicles comercials -- Aspectes ambientals
Data: jun-2007
Tipus de document: Master thesis
Resum: The concept of the project is to setup the manufacturing process and the economic study as well as the production plant layout and waste management of the gear box for industrial vehicle. The gear box contains 21 main parts and 11 parts will be explained in this project, including: Shaft1, Shaft2, Casing, Sliding part, Clutch fork, Pin, Sealing plate1-2, Transmission Plate2, Washer2, Gear1 and Gear2. Firstly we have to do the marketing study in order to estimate the amount of the production we expect to sell in the first and the following years. The marketing study is done by analyzing the data from Spain and European database in industrial section together with the assumption based on reality. The results from this part are the expected production per year which can let us make the decision for the machine type and it will be used in economic study as well. Then the proper manufacturing process and specific tool’s type for each part will be decided and written on the Phase Document and the Summary of the Operation. These 2 documents are in the form that suitable to be used in reality effectively. Not only the manufacturing procedure, we also indicate the proper cutting condition and the calculations of cycle time, cutting force, machine power and the quality verification for each part. The data obtained by the calculation will be used to choose the specific model of machines, the amounts of machines and workers required to achieve the expected production. After we have the clear image of the production line, we shall advance to the economic study. The economic study is a good and reliable tool to indicate the profitability of the business. Every possible cost of the company will be taken into account and be presented as “ Hour Cost “. As well as the economic indicators such as Cash Flow, Period of Pay back, Net Present Value ( NPV ) and Internal Rate of Return ( IRR ) will be presented to be sure that the investment of this business will be profitable. The final tasks are the production plant layout and the waste management. The production plant layout will be designed sketchily as well as the specific suitable location. The waste management is the explanation the way to deal with the chips and chemical waste to be responsible for the social and environment.
URI: http://hdl.handle.net/2099.1/4498
Apareix a les col·leccions:Màster universitari en Enginyeria Mecànica - EMMME
Comparteix:



SFX Query

Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets.

Per a qualsevol ús que se'n vulgui fer no previst a la llei, dirigiu-vos a: sepi.bupc@upc.edu

 

Valid XHTML 1.0! Programari DSpace Copyright © 2002-2004 MIT and Hewlett-Packard Comentaris
Universitat Politècnica de Catalunya. Servei de Biblioteques, Publicacions i Arxius