Grau en Enginyeria en Vehicles Aeroespacials (Pla 2010)
Enviaments recents
-
Estudi de l’estructura del F-117A Nighthawk i reproducció d’una maqueta a escala 1:12
(Universitat Politècnica de Catalunya, 2024-02-05)
Treball Final de Grau
Accés obertRepresentació d’un model a escala 1:12 de l’aeronau F-117 Nighthawk. A partir de l’estudi de la seva estructura, es reproduirà un model 3D. Aquest serà el punt de partida per a representar la seva estructura, de forma ... -
Estudi de viabilitat de l'avaluació del dany d'estructures de formigó protegides amb poliurea mitjançant elements piezoelèctrics
(Universitat Politècnica de Catalunya, 2024-02-07)
Treball Final de Grau
Accés restringit per acord de confidencialitat -
Study of the design of a bycicle frame by comparing different topology optimization software
(Universitat Politècnica de Catalunya, 2024-02-05)
Treball Final de Grau
Accés obertTopology optimization is one of the most efficient numerical approaches to obtain new lightweight structures, aiming to generate unintuitive holes in the less stressed areas. Besides, such complex geometries can nowadays ... -
Study for the computational resolution of conservation equations of mass, momentum and energy. Benchmark solutions of heat transfer and fluid flow problems
(Universitat Politècnica de Catalunya, 2024-02-01)
Treball Final de Grau
Accés obertThis bachelor’s thesis focuses on the resolution of the mass, momentum and energy conservation equations through the resolution of several heat transfer and fluid flow benchmark problems. Its resolution is used as in ... -
Study of the F-35 Lightning II structure and reproduction of a 1:12 scale model
(Universitat Politècnica de Catalunya, 2024-02-05)
Treball Final de Grau
Accés obertThe Lockheed Martin F-35 Lightning II stands as an iconic American family of single-seat, single-engine, all-weather stealth multi-role combat aircraft. Developed during the ’80s and ’90s and finally introduced in 2015, ... -
Estudi de la manufactura de peces 3D de fibra de carboni aplicades al sector de drons
(Universitat Politècnica de Catalunya, 2024-02-05)
Treball Final de Grau
Accés obertEn el present projecte s’han analitzat les diferents tècniques existents per la fabricació de peces de fibra de carboni i se n’ha escollit la més adient (mitjançant el mètode de decisió OWA) en funció dels objectius de que ... -
Geo-enginyeria aeroespacial. Anàlisi de patrons i impactes socioambientals a escala regional
(Universitat Politècnica de Catalunya, 2024-02-01)
Treball Final de Grau
Accés obertAquest treball s’ha centrat en l’estudi dels deixants de condensació dels avions (an., contrails), partint de la base que s’empren, de manera potser inconscient, com a mètode de geoenginyeria aeroespacial. La intenció ha ... -
Study of secondary flow losses in a gas turbine high pressure compressor
(Universitat Politècnica de Catalunya, 2023-07-20)
Treball Final de Grau
Accés obertAssessing entropy generation gives an accurate and reliable data on where pressure and kinetic energy are lost. In this study, the entropy generation on a Raynolds (Re)= 104 flow inside a high pressure compressor (HPC) ... -
Implementation of the Taylor-Maccoll equations and CFD simulation of a scramjet engine
(Universitat Politècnica de Catalunya, 2023-07-14)
Treball Final de Grau
Accés restringit per acord de confidencialitat -
Preliminary design of a tailless standard-class sailplane
(Universitat Politècnica de Catalunya, 2023-10-16)
Treball Final de Grau
Accés obertThe main objective of the present thesis is to present a preliminary design of a tailless sailplane. The aforementioned sailplane’s class will be standard, which means that the wingspan will be 15 meters and without flaps. -
Study and development of Ardupilot missions for fixed-wings
(Universitat Politècnica de Catalunya, 2023-10-19)
Treball Final de Grau
Accés obertAlthough Unmanned Aerial Vehicles (UAV) have been developed since the early 20th century, it is only over the last two decades that they have gained prominence in the civilian market. This has opened the doors to a whole ... -
Study of the flow around a non-planar C-wing via computational fluid dynamics
(Universitat Politècnica de Catalunya, 2023-10-23)
Treball Final de Grau
Accés obertIn the aeronautical industry, the pursuit of efficiency is a fundamental factor that governs the characteristics of an aircraft. Therefore, the implementation of new aerodynamic devices capable of altering the airflow ...