Study on a radial turbine stage with inlet guide vanes for an orc process with an electrical output of 3,5 kw
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2099.1/22574
Tutor / directorVogt, Damian
Tipus de documentProjecte/Treball Final de Carrera
Data2013
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The goal of the present thesis is initially to determine if the ideal gas model is valid for the modelling of the refrigerant R-245fa for an ORC expansion in a radial turbine. Therefore, the expansion will be calculated using an ideal gas model and a real gas one. The results from both calculations will be compared in order to determine if the ideal gas model leads to valid results. After deciding which of the models leads to better results, this model will be used to perform an optimization of the radial turbine by varying its inlet width and the rotational speed.
ProvinençaAquest document conté originàriament altre material i/o programari no inclòs en aquest lloc web
TitulacióENGINYERIA INDUSTRIAL (Pla 1994)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
eduardothesis.pdf | Report | 3,461Mb | Visualitza/Obre |