Exhaust heat recovery on automotive combustion engines
Visualitza/Obre
Report (8,989Mb) (Accés restringit)
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2099.1/14930
Tutor / directorKuthada, Timo
Tipus de documentProjecte/Treball Final de Carrera
Data2011
Condicions d'accésAccés restringit per decisió de l'autor
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Also in modern combustion engines, the maximal energetic efficiency is lower than 45%, which means that 55% of the supplied energy is lost and released to the environment. Automobile manufacturers and R&D partner suppliers are taking a special concern in investigating heat energy from exhaust gases, with the aim of recovering part of the heat by means of a Rankine Process and using it for energy cogeneration in the automobile. In the context of this Master Thesis, a new calculation software of the different thermodynamic states of the waste heat recovery system has to be programmed and used together with the rest of the available calculation tools. Another objective of this Master Thesis is the set up of valid simulation models for the different components of the heat recovery system based on measured testing data. This technical conditions and on the other hand the cycle requirements with the final objective of finding optimized states for each component. Finally, in order to reflect the behaviour of the system as a whole, the integration of the different simulated components of the waste heat recovery model would come in very useful. A complete simulation of the system would enable the estimation of optimization issues of the different parameters and operating points of the cycle.
MatèriesAutomobiles -- Motors, Internal combustion engines, Heat recovery, Thermodynamics -- Simulation methods, Automòbils -- Motors -- Gas d'escapament, Motors de combustió interna, Calor -- Recuperació, Termodinàmica -- Mètodes de simulació
TitulacióENGINYERIA INDUSTRIAL (Pla 1994)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
2011_Gil_Arbues ... in Verbrennungsmotoren.pdf | Report | 8,989Mb | Accés restringit |