DSpace DSpace UPC
 English   Castellano   Català  

Treballs academics UPC >
Escola Tècnica Superior d'Enginyeria Industrial de Barcelona >
Enginyeria Industrial >

Empreu aquest identificador per citar o enllaçar aquest ítem: http://hdl.handle.net/2099.1/14372

Arxiu Descripció MidaFormat
Master Thesis of Joan Locutura i Moré. Comparison between a tubular frame and a beam frame. Course 2010-2011.PDFReport15,14 MBAdobe PDFVeure/Obrir

Títol: Comparison between a tubular frame and a beam frame
Autor: Locutura Moré, Joan
Tutor/director/avaluador: Federico Cheli
Universitat: Universitat Politècnica de Catalunya
Politecnico di Milano
Matèries: Àrees temàtiques de la UPC::Enginyeria dels materials::Assaig de materials::Assaig de fatiga
Àrees temàtiques de la UPC::Enginyeria mecànica::Disseny i construcció de vehicles
Motorcycles -- Design and construction
Aluminum -- Fatigue
Steel -- Fatigue
Motocicletes -- Disseny
bastidor
Alumini -- Fatiga
Acer -- Fatiga
Data: 2010
Tipus de document: Master thesis (pre-Bologna period)
Resum: Nowadays, at Moto2 Championship there are mainly two kinds of frames talking about profiles (“square” the majority of them like Suter, FTR or Moriwaki and tubular some of theme MZ and Promoharris). At this work is going to be compared which are the mechanical differences between a tubular and square (no tubular) frame about stiffness, torsion and flexional resistance, weight, inertia,... and trying to take some conclusions. This project is composed by two parts: - The first one is a bit of general information talking about the history of motorcycles (particularly frames field), then there is a short introduction about which kind of frames exists, a description on important points that define motorcycle’s geometry and finally, the materials that frames are made of. (Chapters 3 to 5) - Second part, it’s the static and dynamic comparison between two frames. The first frame is made of steel and its tubular profile while the second one is a frame made of aluminium and its square profile. Both are drawn by SolidWorks and then analyzed by ANSYS with their belonging forces. To improve the results there is an optimization part. Some hypotheses are considered to do the analysis a bit less complex. An analysis on mechanical fatigue, modes on vibrations and own frequency are done too. Also there is a section about how frames could be manufactured, their weldings needed and a small study about cost. (Chapters 6 to 13). Finally, there is a short chapter about environment (energy wasted to do the frame (approximated) and to do this master thesis). It is an important thing to be considered for now, next future and future. (Chapter 14)
URI: http://hdl.handle.net/2099.1/14372
Provinença: Aquest document conté originàriament altre material i/o programari no inclòs en aquest lloc web
Condicions d'accés: Open Access
Apareix a les col·leccions:Enginyeria Industrial
Programes de mobilitat "outgoing" (ETSEIB)
Comparteix:



SFX Query

Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets.

Per a qualsevol ús que se'n vulgui fer no previst a la llei, dirigiu-vos a: sepi.bupc@upc.edu

 

Valid XHTML 1.0! Programari DSpace Copyright © 2002-2004 MIT and Hewlett-Packard Comentaris
Universitat Politècnica de Catalunya. Servei de Biblioteques, Publicacions i Arxius