Reduction of radiated EMI from a CAN transceiver
Visualitza/Obre
memoria.pdf (2,214Mb) (Accés restringit)
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2099.1/11629
Tipus de documentProjecte Final de Màster Oficial
Data2008-11-28
Condicions d'accésAccés restringit per decisió de l'autor
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The aim of this work is the evaluation and reduction of the radiated emissions of a
CAN transceiver. To reduce the emissions, a set of good EMC (Electromagnetic
Compatibility) practices will have to be applied. The possibility of using PLC (Power
Line Communications) techniques and its impact in the EMC performance of the
system is also considered.
We present measurements of the radiated emissions of a realistic CAN node for
telemetry applications based on a previously designed CAN transceiver. To do so, we
designed and build a sensors board to be connected to the transceiver and we
arranged a suitable measurement set-up. Next, we redesigned the CAN transceiver.
The set of good EMC practices we applied resulted in a noticeable reduction of the
radiated emissions.
Finally we evaluated the possibility of using PLC (Power Line Communications) to
reduce the number of cables of CAN buses.
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
memoria.pdf | 2,214Mb | Accés restringit |