Exploració per títol
Ara es mostren els items 2831-2850 de 245593
-
A 125-143-GHz frequency-reconfigurable BiCMOS compact LNA using a single RF-MEMS switch
(2019-05-01)
Article
Accés obertIn this letter, a 125-143-GHz frequency-reconfigurable BiCMOS compact low-noise amplifier (LNA) is presented for the first time. It consists of two cascode stages and was fabricated using a 0.13-µm SiGe:C BiCMOS process, ... -
A 16-kV HBM RF ESD Protection Codesign for a 1-mW CMOS Direct Conversion Receiver Operating in the 2.4-GHz ISM Band
(2011-09)
Article
Accés restringit per política de l'editorialA decreasing-sized π -model electrostatic discharge (ESD) protection structure is presented and applied to protect against ESD stresses at the RF input pad of an ultra-low power CMOS front-end operating in the 2.4-GHz ... -
A 1D analogue of the SMOS interferometer
(Universitat Politècnica de Catalunya, 2019)
Treball d'assignatura
Accés obert -
A 1D lumped-parameter/3D CFD approach for pressure drop in the aortic coarctation
(Springer, 2012)
Text en actes de congrés
Accés restringit per política de l'editorialAortic Coarctation is a congenital constriction of the aorta that increases blood pressure above the constriction and hinders the flow below it. Based on a 3D surface mesh of a moderate thoracic coarctation, a high quality ... -
A 2.4 GHz CMOS class-F power amplifier with reconfigurable load-impedance matching
(2019)
Article
Accés obert -
A 2.5D automatic FEM-SBM method for the evaluation of free-field vibrations induced by underground railway infrastructures
(2022)
Text en actes de congrés
Accés obertThis paper presents an efficient method to predict underground railway-induced vibrations. The method uses the finite element method (FEM) to model the railway tunnel structure and the singular boundary method (SBM) to ... -
A 2.5D coupled FEM-BEM-MFS methodology for longitudinally invariant soil-structure interaction problems
(Elsevier, 2021-04)
Article
Accés obertThis paper is concerned with a new prediction methodology for longitudinally invariant soil-structure interaction problems in elastodynamics. The method uses the finite-element method to model the structure, the boundary-element ... -
A 2.5D coupled FEM–SBM methodology for soil–structure dynamic interaction problems
(Elsevier, 2022-01-01)
Article
Accés obertIn this paper, a novel numerical methodology to deal with longitudinally invariant soil–structure interaction problems is proposed. The methodology uses the finite element method to model the structure and the singular ... -
A 2.5D FEM-BEM-MFS methodology for soil-structure interaction problems in layered half-spaces
(2020)
Text en actes de congrés
Accés obertIn this paper, a new prediction methodology to deal with longitudinally invariant soil-structure interaction problems in elastodynamics is presented. The method uses the finite-element method to model the structure, the ... -
A 2.5D hybrid SBM-MFS methodology for the evaluation of free-field vibrations induced by underground railway infrastructures
(2023)
Text en actes de congrés
Accés restringit per política de l'editorialIn this paper, a new meshless methodology to predict underground railway-induced vibrations is presented. In contrast to previous approaches, the proposed method uses meshless methods to model both the railway tunnel ... -
A 250-ps integrated ultra-wideband timed array beamforming receiver in 0.18 um CMOS
(Institute of Electrical and Electronics Engineers (IEEE), 2020)
Comunicació de congrés
Accés obertThis paper presents a 4-channel ultra-wideband (UWB) timed array beamforming receiver designed in a standard 0.18-um CMOS technology. The proposed timed array receiver achieves a maximum delay of 250 ps at the maximum beam ... -
A 2D dual-scale method to address contact problems
(2022-07)
Article
Accés obertA seamless 2D dual-scale computational scheme is developed to study contact problems. The model consists of an atomistic domain close to the contact, coupled with an elastic continuum domain away from the contact. The ... -
A 3-axis stabilisation platform to improve experiment conditions in parabolic flights
(Universitat Politècnica de Catalunya, 2022-04-29)
Comunicació de congrés
Accés obertThere are different ways of providing free-fall conditions on Earth in order to test a component, perform an experiment or demonstrate equipment before it can be included in a space mission. One of these options is a ... -
A 3-D Pareto-based shading analysis on solar photovoltaic system design optimization
(2018-06-20)
Article
Accés obert -
A 3-D volume-of-fluid advection method based on cell-vertex velocities for unstructured meshes
(Elsevier, 2014-05-01)
Article
Accés restringit per política de l'editorialA new geometrical Volume-of-Fluid (VOF) method for capturing interfaces on three-dimensional (3-D) Cartesian and unstructured meshes is introduced. The method reconstructs interfaces as first- and second-order piecewise ... -
A 36 µW 1.1 mm2 reconfigurable analog front-end for cardiovascular and respiratory signals recording
(2018-04-06)
Article
Accés obertThis paper presents a 1.2 V 36 µW reconfigurable analog front-end (R-AFE) as a general-purpose low-cost IC for multiple-mode biomedical signals acquisition. The R-AFE efficiently reuses a reconfigurable preamplifier, a ... -
A 3D CFD numerical study of the bubble generation process into a bubble Tjunction generator and its comparison with experimental data: Part I
(2016)
Text en actes de congrés
Accés obertThis work presents a 3D numerical study of the bubble generation process into a bubble generator obtained with the commercial Computational Fluid Dynamics solver ANSYS Fluent v15.0.7, and its comparison with experimental ... -
A 3D CFD numerical study of the bubble generation process into a bubble Tjunction generator and its comparison with experimental data: Part II
(2016)
Text en actes de congrés
Accés obertThis work is a continuation of the 3D numerical study of the bubble generation process into a T-junction bubble generator (1 mm of internal diameter) obtained with the commercial Computational Fluid Dynamics solver ANSYS ... -
A 3D descriptor to detect task-oriented grasping points in clothing
(2016)
Article
Accés obertManipulating textile objects with a robot is a challenging task, especially because the garment perception is difficult due to the endless configurations it can adopt, coupled with a large variety of colors and designs. ... -
A 3D FEM model for floating wind turbines support structures
(2017-10)
Article
Accés obertThe relevance of the interaction between the structural stiffness and the wind turbine dynamics are well known by the industry from decades of expertise. However, the novel floating concepts are commonly designed by tools ...