Mostra el registre d'ítem simple

dc.contributor.authorValero Ferrando, Ma. del Carmen
dc.contributor.authorHuang, Xingxing
dc.contributor.authorEgusquiza Estévez, Eduard
dc.contributor.authorFarhat, Mohamed
dc.contributor.authorAvellan, François
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Mecànica de Fluids
dc.date.accessioned2010-10-15T09:58:07Z
dc.date.available2010-10-15T09:58:07Z
dc.date.created2010
dc.date.issued2010
dc.identifier.citationValero, M. [et al.]. Modal behavior of a reduced scale pump-turbine impeller. Part II. Numerical Simulation. A: IAHR Symposium on Hydraulic Machinery and Systems. "Proceedings 25th IAHR Symposium on Hydraulic Machinery and Systems". Timisoara: 2010, p. 926-934.
dc.identifier.isbn978-606-554-136-8
dc.identifier.urihttp://hdl.handle.net/2117/9718
dc.description.abstractA numerical simulation has been carried out to analyze the modal behavior of a reduced scale pump-turbine impeller. The simulation has been done using FEM method, in air and in water. The same boundary conditions than in the experiment were considered: free body in air and free body submerged in a reservoir of water. A sensitivity analysis to determine the influence of the number of elements was done. The influence of the input parameters was also taken into account. Finally, a mesh with 165000 elements for the impeller in air and of 508676 for the impeller in water was used. The results obtained with the simulation have been compared with the experimental ones (paper 1). Both the natural frequency values and the mode-shapes were compared. The numerical results showed small deviation from experiment in the first modes in modes with low modal density. In some coupled modes been found. With the updated model the mode-shapes have been analyzed. Some modes with high modal density have been found. As indicated in the experiment, the effect of the added mass reduces the natural frequencies and also changes the characteristics of the coupled modes
dc.format.extent9 p.
dc.language.isoeng
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria mecànica::Mecànica de fluids
dc.subjectÀrees temàtiques de la UPC::Enginyeria mecànica::Mecànica de fluids::Màquines hidràuliques i de fluids
dc.subject.lcshFluid mechanics
dc.subject.lcshHydraulic turbines
dc.titleModal behavior of a reduced scale pump-turbine impeller. Part II. Numerical Simulation
dc.typeConference lecture
dc.subject.lemacMecànica de fluids
dc.subject.lemacTurbines
dc.contributor.groupUniversitat Politècnica de Catalunya. FLUIDS - Enginyeria de Fluids
dc.identifier.doi10.1088/1755-1315/12/1/012117
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac3127248
dc.description.versionPostprint (published version)
local.citation.authorValero, M.; Huang, X.; Egusquiza, E.; FARHAT, M.; Avellan, F.
local.citation.contributorIAHR Symposium on Hydraulic Machinery and Systems
local.citation.pubplaceTimisoara
local.citation.publicationNameProceedings 25th IAHR Symposium on Hydraulic Machinery and Systems
local.citation.startingPage926
local.citation.endingPage934


Fitxers d'aquest items

Imatge en miniatura

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple