In this paper two sliding mode control alternatives to regulate the stator voltage amplitude for a stand alone wound rotor synchronous generator are presented. Both controllers use the stator voltage d-component error in the sliding surface. In a first case an outer PI loop controller is added to provide the proper d-voltage component reference. The second approach consists in extending the dynamic system to include the integral term as state variable and to modify the former sliding surface by adding this new state. Finally, simulations results are done in order to validate the proposed algorithms.
CitationDoria-Cerezo, A. [et al.]. Two sliding mode control approaches for the stator voltage amplitude regulation of a stand-alone WRSM. A: International Workshop on Variable Structure Systems. "11th International Workshop on Variable Structure Systems". Mexico City: 2010, p. 440-445.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org