A Bayesian approach to robust identification: application to fault detection
Visualitza/Obre
10.5821/dissertation-2117-94848
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/94848
Càtedra / Departament / Institut
Universitat Politècnica de Catalunya. Departament de Teoria del Senyal i Comunicacions
Tipus de documentTesi
Data de defensa2013-02-07
EditorUniversitat Politècnica de Catalunya
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
In the Control Engineering field, the so-called Robust Identification techniques deal with the problem of obtaining not only a nominal model of the plant, but also an estimate of the uncertainty associated to the nominal model. Such model of uncertainty is typically characterized as a region in the parameter space or as an uncertainty band around the frequency response of the nominal model.
Uncertainty models have been widely used in the design of robust controllers and, recently, their use in model-based fault detection procedures is increasing. In this later case, consistency between new measurements and the uncertainty region is checked. When an inconsistency is found, the existence of a fault is decided.
There exist two main approaches to the modeling of model uncertainty: the deterministic/worst case methods and the stochastic/probabilistic methods. At present, there are a number of different methods, e.g., model error modeling, set-membership identification and non-stationary stochastic embedding. In this dissertation we summarize the main procedures and illustrate their results by means of several examples of the literature.
As contribution we propose a Bayesian methodology to solve the robust identification problem. The approach is highly unifying since many robust identification techniques can be interpreted as particular cases of the Bayesian framework. Also, the methodology can deal with non-linear structures such as the ones derived from the use of observers. The obtained Bayesian uncertainty models are used to detect faults in a quadruple-tank process and in a three-bladed wind turbine.
CitacióFernández Canti, R.M. A Bayesian approach to robust identification: application to fault detection. Tesi doctoral, UPC, Departament de Teoria del Senyal i Comunicacions, 2013. DOI 10.5821/dissertation-2117-94848. Disponible a: <http://hdl.handle.net/2117/94848>
Dipòsit legalB. 16897-2013
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
TRFC1de1.pdf | 8,581Mb | Visualitza/Obre |