Leaks are present to some extent in all water-distribution systems. This paper proposes a leakage
localisation method based on the pressure measurements and pressure sensitivity analysis of nodes in a
network. The sensitivity analysis using analytical tools is not a trivial job in a real network because the
huge non-explicit non-línear systems of equation that describe its dynamics. Simulations of the network in
presence and absence of leakage may provide an approximation of this sensitivity. This matrix is binarised
using a threshold independent of the node. The binary matrix is assumed as a signature matrix for
leakages. However, there is a trade-off between the resolution of the leakage isolation procedure and the
number of available pressure sensors. In order to maximise the isolability with a reasonable number of
sensors, an optimal sensor placement methodology, based on genetic algorithms, is also proposed. This
methodology has been developed for Barcelona Network using Piccolo simulator. The sensor placement
and the leakage detection and localization methodologies are applied to district management areas (DMA).
CitationPérez, R. [et al.]. Leakage isolation using pressure sensitivity analysis in water distribution networks: Application to the Barcelona case study. A: IFAC Symposium on Large-Scale Systems: Theory and Applications. "12th IFAC Symposium on Large-Scale Systems: Theory and Applications, 2010". Villeneuve d'Ascq: 2010, p. 1-6.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: email@example.com