Pre-and post FFT SIMO array techniques in H2 environments
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/8836
Tipus de documentText en actes de congrés
Data publicació2002
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The performance of very high data rate Wireless Local Area
Networks (WLANs) is degraded by several problems such as long delay
spread in outdoor environments or interference that may arise both from
other WLANs or from other systems sharing the same band. The current
standards allow the use of multiple antennas at the receiver in a Single
Input Multiple Output (SIMO) configuration. Traditionally, algorithms
have been applied in the frequency domain, but this paper presents a comparison
of three approaches to be applied also in the time domain. It is
shown that a significant uncoded Bit Error Rate (BER) performance improvement
can be achieved by working before the FFT at the receiver side,
especially for channels with large delay spreads.
CitacióPérez, A.; Bartolome, D. Pre-and post FFT SIMO array techniques in H2 environments. A: VTC'02. "VTC'02". Alabama: 2002.
ISBN0-7803-7485
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
PrepostFFT.pdf | 50,99Kb | Visualitza/Obre |