A hybrid modal-boundary element method for electromagnetic scattering from arbitrary conducting wedges
Cita com:
hdl:2117/87922
Tipus de documentText en actes de congrés
Data publicació1990
EditorInstitute of Electrical and Electronics Engineers (IEEE)
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
A hybrid technique is used to determine the electromagnetic scattering contribution of arbitrary conducting wedges in electrically large objects. The boundary integral equation is discretized in a fictitious contour, and the field outside is expanded in modal series. From the knowledge of fields at the conducting surface, the method could be used jointly with a physical-optics high-frequency approximation to obtain the radar cross section of electrically large objects. Results are presented for the total field in an infinite conducting wedge under TM plane-wave illumination. From the eigenfunction solution, the currents at the surface of the wedge can be easily determined.
CitacióCruellas, J., Ferrando, M. A hybrid modal-boundary element method for electromagnetic scattering from arbitrary conducting wedges. A: Antennas and Propagation Society International Symposium 1990. "AP-S '90: Merging technologies for the 90's: 1990 international symposium digest, antennas and propagation: Dallas, TX: May 7-11, 1990". Dallas, TX: Institute of Electrical and Electronics Engineers (IEEE), 1990, p. 1288-1291.
Versió de l'editorhttp://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=115348
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
A hybrid modal- ... rary conducting wedges.pdf | 167,3Kb | Visualitza/Obre |