Charge-transfer-based signal interface for resistive sensors
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/86684
Tipus de documentComunicació de congrés
Data publicació2015
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Charge transfer has been demonstrated to be a cost-effective method to measure capacitive sensors with low-end microcontrollers. Here we apply charge transfer to measure the output of voltage dividers that include a high value resistive sensor hence extending the advantages of this method to a large group of sensors. By using two-point calibration, the maximal deviation obtained, referred to the Full Scale Span (FSS), is ±4 % for sensors between 100 kO and 1 MO, and ±5 % for sensors between 1 MO and 10 MO.
CitacióGaitán-Pitre, J. E., Pallàs-Areny, R. Charge-transfer-based signal interface for resistive sensors. A: IMEKO World Congress. "XXI IMEKO World Congress". Praga: 2015, p. 672-675.
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Charge-transfer ... ive sensors_IMEKO 2015.pdf | Articke complet | 711,0Kb | Visualitza/Obre |