Microwave noise parameter measurements of a high temperature superconducting flux flow transistor
Cita com:
hdl:2117/86275
Tipus de documentArticle
Data publicació1991-02
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
The noise parameters of a high-temperature superconducting (HTS) flux flow transistor made of TlBaCaCuO operating at 77 K and 3-5 GHz were experimentally determined. It is assumed that the dominant noise mechanism of the device, which is based on an array of weak links with a magnetic control line, is due to the statistical nature of flux nucleation and motion in the links. The noise parameters dictate the dependence of the noise figure on the source impedance, and are calculated by measuring source impedances. Sensitivity analysis is used to estimate the accuracy of the measurements. The measurements indicate a minimum noise figure of less than 1 dB at 3 GHz
CitacióO'callaghan, J., Martens, J., Thompson, J., Beyer, J., Nordman, J. Microwave noise parameter measurements of a high temperature superconducting flux flow transistor. "IEEE transactions on magnetics", Febrer 1991, vol. 27, núm. 2, p. 3289-3292.
ISSN0018-9464
Versió de l'editorhttp://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=133915
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Microwave noise ... flux flows transistor.pdf | 337,2Kb | Visualitza/Obre |