Performance of an implantable impedance spectroscopy monitor using ZigBee
Visualitza/Obre
Performance of an implantable impedance sprectroscopy...pdf (534,9Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1088/1742-6596/224/1/012163
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/8562
Tipus de documentComunicació de congrés
Data publicació2010-04-04
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This paper presents the characterization measurements of an implantable bioimpedance monitor with ZigBee. Such measurements are done over RC networks,performing short and long-term measurements, with and without mismatch in electrodes and varying the temperature and the RF range. The bioimpedance monitor will be used in organ
monitoring through electrical impedance spectroscopy in the 100 Hz - 200 kHz range. The specific application is the study of the viability and evolution of engineered tissue in cardiac regeneration in an experimental protocol with pig models. The bioimpedance monitor includes a ZigBee transceiver to transmit the measured data outside the animal chest. The bioimpedance monitor is based in the 12 Bit Impedance Converter and Network Analyzer AD5933, improved with an analog front-end that implements a 4-electrode measurement structure and allows to measure small impedances. In the debugging prototype, the system autonomy exceeds 1 month when a 14 frequencies impedance spectrum is acquired every 5
minutes. The receiver side consists of a ZigBee transceiver connected to a PC to process the received data. In the current implementation, the effective range of the RF link was of a few centimeters, then needing a range extender placed close to the animal. We have increased it by using an antenna with higher gain. Basic errors in the phantom circuit parameters estimation
after model fitting are below 1%.
CitacióBogonez, F. [et al.]. Performance of an implantable impedance spectroscopy monitor using ZigBee. A: International Conference on Electrical Bioimpedance. "XIVth International Conference on Electrical Bioimpedance and the 11th Conference on Biomedical Applications of EIT". Florida: 2010, p. 1-4.
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Performance of ... edance sprectroscopy...pdf | 534,9Kb | Accés restringit |