Shunt active power filters have proven to be an
efficient means to compensate for the negative effects of nonlinear
and reactive loads on the power quality of the electrical distribution
network. In this context, the control objective is to achieve
a power factor close to 1, as well as load current harmonics
and reactive power compensation. A useful control strategy for
this purpose is repetitive control. However, the performance of
repetitive controllers is strongly affected by frequency variations
of the involved signals. This work analyzes the effect of such
variations and describes the architecture of an odd-harmonic,
high-order repetitive controller specifically designed to obtain
robust closed-loop performance against frequency variations that
may occur in the electrical network.
CitationRamos, G. [et al.]. Robust high-order repetitive control of an active filter using an odd-harmonic internal model. A: IEEE International Symposium on Industrial Electronics. "IEEE International Symposium on Industrial Electronics 2010". Bari: 2010, p. 1040-1045.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org